journal article·2019-11

Influence of imperfections on the load capacity and stiffness of glued-in rod connections

Nils Ratsch, Stefan Böhm, Morten Voß, Marvin Kaufmann, Till Vallée

Publisher page

Abstract

Abstract Glued-in rods (GiR), which consist of rods glued into structural elements of wood, or engineered wood products, share the manufacturing quality concerns associated to adhesively bonded joints in general. Because of the difficulties associated with the bonding process, it is often argued within the timber engineering community that under the specific conditions prevailing in construction sites, it is not possible to meet the high-quality requirements for bonded joints typically encountered in other industries. The present study presents experimental evidence gathered on 240 individual probes in which the effect of several different types of defects (excessive wood moisture content, wood chips not removed from the borehole, simulated air inclusions by mixing polystyrene spheres, oil contaminated rods, and corroded rod) was investigated with threaded rods glued into beech spruce glued laminated timber (GLT) and beech laminated veneer lumber (LVL) using four adhesives (including 2K-epoxies and a 2K-polyurethane). Results were analysed by means of an analysis of variance (ANOVA). The findings showed that glued-in rods represent a relatively robust class of adhesively bonded joints, as the majority of defects types could not be distinguished on statistical ground from the reference sets, with the notable exception of air voids leading to a significant decrease of joint capacity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wood Treatment and Properties · Tree Root and Stability Studies · Structural Analysis of Composite Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Adoption of unconventional approaches in construction: the case of cross-laminated timber10.1016/j.conbuildmat.2016.08.088 ↗
2. Assessing the integrity of glued-laminated timber elements10.1016/j.conbuildmat.2015.06.064 ↗
3. Structural behaviour of glued laminated timber beams pre-stressed by compressed wood10.1016/j.conbuildmat.2011.10.002 ↗
4. Cross laminated timber (CLT): overview and development10.1007/s00107-015-0999-5 ↗
5. A review of the utilisation of hardwoods for LVL10.1007/s002260050120 ↗
6. The contribution of wood-based construction materials for leveraging a low carbon building sector in Europe10.1016/j.scs.2017.06.013 ↗
7. State-of-the-art review of displacement-based seismic design of timber buildings10.1016/j.conbuildmat.2018.09.205 ↗
8. High-capacity hold-down for mass-timber buildings10.1016/j.conbuildmat.2018.01.019 ↗
9. The wood from the trees: The use of timber in construction10.1016/j.rser.2016.09.107 ↗
10. Timber joints with multiple glued-in steel rods
11. State-of-the-art review on timber connections with glued-in steel rods10.1617/s11527-010-9682-9 ↗
12. Strengthening of timber structures with glued-in rods10.1016/j.conbuildmat.2015.03.097 ↗
13. Rods glued in engineered hardwood products part I: experimental results under quasi-static loading
14. Rods glued in engineered hardwood products part II: numerical modelling and capacity prediction
15. Withdrawal strength of threaded steel rods glued with epoxy in wood10.1016/j.ijadhadh.2013.02.008 ↗
16. Pull-out strength and bond behaviour of axially loaded rebar glued-in glulam10.1016/j.conbuildmat.2014.05.008 ↗
17. Numerical investigations and capacity prediction of G-FRP rods glued into timber10.1016/j.compstruct.2017.10.010 ↗
18. Experimental investigations on timber joints with single glued-in FRP rods10.1016/j.conbuildmat.2017.02.091 ↗
19. C. Bengtsson, C.-J. Johansson, GIROD – Glued-in Rods for Timber Structures: SMT4-CT97-2199. SR Report 2002:26. Boras/Sweden, 2002.
20. Low-grade glued laminated timber beams reinforced using improved arrangements of bonded-in GFRP rods10.1016/j.conbuildmat.2013.11.044 ↗
21. Glued joints in hardwood timber10.1016/j.ijadhadh.2008.04.008 ↗
22. Pull-compression tests on glued-in metric thread rods parallel to grain in glulam and laminated veneer lumber of different timber species10.1007/s00107-015-1001-2 ↗
23. Fracture mechanics based joint capacity prediction of glued-in rods with beech laminated veneer lumber
24. Effect of timber moisture content on bonded-in rods10.1016/S0950-0618(00)00066-0 ↗
25. Influence of elevated temperature on glued-in steel rods for timber elements10.1016/j.conbuildmat.2017.04.038 ↗
26. Joints with bars glued-in softwood laminated timber subjected to climatic cycles10.1016/j.ijadhadh.2017.12.010 ↗
27. Experimental study of static and fatigue strengths of pultruded GFRP rods bonded into LVL and glulam10.1016/j.ijadhadh.2003.07.004 ↗
28. Tensile and fatigue investigations of timber joints with glued-in FRP rods
29. A simple unified model for withdrawal of lag screws and glued-in rods10.1007/s00107-010-0478-y ↗
30. Analytical study and finite element modelling of timber connections with glued-in rods in bending10.1016/j.conbuildmat.2012.02.087 ↗
31. Glued-in rods for timber structures – a 3D model and finite element parameter studies10.1016/S0143-7496(00)00043-9 ↗
32. M. Stepinac, F. Hunger, R. Tomasi, E. Serrano, V. Rajcic, J.W. van de Kuilen, Comparison of design rules for glued-in rods and design rule proposal for implementation in European standards: Working Commission W18 – Timber Structures. CIB-W18/46-7-10. Karlsruhe: Timber Scientific Publishing, 2013.
33. Strength of single lap joints with artificial defects10.1016/j.ijadhadh.2013.04.009 ↗
34. Strength and damage growth in composite bonded joints with defects10.1016/j.compositesb.2016.06.060 ↗
35. Nondestructive testing of adhesively-bonded joints10.1016/S0963-8695(96)00050-3 ↗
36. The non-destructive testing of adhesively bonded structure: a review10.1080/00218468608074943 ↗
37. Non destructive evaluation of adhesively bonded carbon fiber reinforced composite lap joints with varied bond quality
38. Nondestructive testing and system reliability based on finite element modeling in GFRP-reinforced timber beams10.15376/biores.9.3.5501-5510 ↗
39. The effects of manufacturing-induced and in-service related bonding quality reduction on the mode-I fracture toughness of composite bonded joints for aeronautical use10.1016/j.compositesb.2012.05.052 ↗
40. A review of defect types and nondestructive testing techniques for composites and bonded joints
41. Assessment of the effect of defects on mechanical properties of adhesive bonded joints by using non destructive methods10.1016/j.compositesb.2016.01.059 ↗
42. Effect of bonding defects on shear strength in tension of lap joints having brittle adhesives10.1002/app.1972.070160804 ↗
43. Effects of symmetrical bonding defects on tensile shear strength of lap joints having ductile adhesives10.1002/app.1971.070150503 ↗
44. Adhesive systems for structural connections in timber10.1016/S0143-7496(00)00049-X ↗
45. M. Stepinac, V. Rajčić, F. Hunger, J.-W. van de Kuilen, R. Tomasi, E. Serrano, Comparison of design rules for glued-in rods and design rule proposal for implementation in european standards, 2013.
46. Adhesively bonded timber joints – do defects matter?10.1016/j.ijadhadh.2014.07.003 ↗
47. The impact of defects on the capacity of timber joints with glued-in rods10.1016/j.ijadhadh.2015.11.002 ↗
48. Influence of manufacturing methods and imperfections on the load capacity of glued-in rods
49. Experimental and numerical investigations on full-scale adhesively bonded timber trusses10.1617/s11527-011-9735-8 ↗
50. Glued-in rods in beech laminated veneer lumber10.1007/s00107-016-1037-y ↗
51. Comparing individual means in the analysis of variance10.2307/3001913 ↗
52. The probable error of a mean. Biometrika 1908;6(1):1–25.10.2307/2331554 ↗