Study on the interaction mechanism in the hardening process of cement-asphalt mortar
Source abstract
Abstract
Abstract As an inorganic-organic composite, cement asphalt mortar (CA mortar) is a crucial material for ballastless track structure, integrating cement mechanical properties and asphalt flexibility. Therefore, as a semi-flexible pavement material, it has extensive application in high-speed railways. To ascertain interfacial behavior during the hardening process of CA mortar, the interaction mechanism was investigated by measurement of the electrical conductivity, pH values, relative adsorption rate, and Fourier transform infrared (FT-IR) spectroscopy. Cement hydration process and the type of emulsified asphalt can affect ionic strength and pH value of the slurry system. The results indicated that the cement hydration process was beneficial to the enhancement of electrical conductivity because of an increase in the amount of ions released in the system. By contrast, anionic emulsifier, cationic emulsifiers performed better in improving electrical properties and had higher electrical conductivity. The addition of emulsified asphalts led to the delays of the cement hydration. The reaction mechanism involving the retardation effect mainly owed to the combination of emulsifier with cement particles at the active sites through the acid-base neutralization reaction. Hence, anionic emulsified asphalt exhibited a positive impact on cement hydration and displayed a high pH value. To further confirm the bonding performance of asphalt binder via identifying the functional chemical group, four components were firstly separated from asphalt. In respect to four components of asphalt, the adsorption behavior mainly occurred in the asphaltene and resin components, attributing to the strong chemical bonding effect, which was confirmed by the results of infrared spectra.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Smart Materials for Construction · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Recent developments in slab track
2. A novel method to evaluate the setting process of cement and asphalt emulsion in CA mortar10.1617/s11527-007-9270-9 ↗
3. Study on the rheological properties of fresh cement asphalt paste10.1016/j.conbuildmat.2011.07.010 ↗
4. Thermo-mechanical coupling effect on fatigue behavior of cement asphalt mortar10.1016/j.ijfatigue.2013.01.001 ↗
5. Temperature stability of compressive strength of cement asphalt mortar
6. Chemical admixture-cement interactions: phenomenology and physico-chemical concepts10.1016/S0958-9465(97)00062-0 ↗
7. Influence of polymers on microstructure and adhesive strength of cementitious tile adhesive mortars10.1016/j.cemconres.2004.06.039 ↗
8. Changes in microstructures and physical properties of polymer-modified mortars during wet storage10.1016/j.cemconres.2005.06.001 ↗
9. Properties of plain and latex modified Portland cement pastes and concretes with and without superplasticizer10.1016/j.cemconres.2004.11.012 ↗
10. Influences of superplasticizer, polymer latexes and asphalt emulsions on the pore structure and impermeability of hardened cementitious materials10.1016/j.conbuildmat.2013.11.104 ↗
11. Polymer modified mortar with gradient polymer distribution: preparation, permeability, and mechanical behavior10.1016/j.conbuildmat.2012.07.080 ↗
12. Enhancing interfacial strength of epoxy resin composites via evolving hyperbranched amino-terminated POSS on carbon fiber surface10.1016/j.compscitech.2018.12.001 ↗
13. Nanocomposite sponges of sodium alginate/graphene oxide/polyvinyl alcohol as potential wound dressing: In vitro and in vivo evaluation10.1016/j.compositesb.2019.03.006 ↗
14. Poly (vinyl butyral)/graphene oxide/poly (methylhydrosiloxane) nanocomposite coating for improved aluminum alloy anticorrosion10.1016/j.polymer.2019.03.056 ↗
15. Reinforcing carbon fiber epoxy composites with triazine derivatives functionalized graphene oxide modified sizing agent10.1016/j.compositesb.2019.107078 ↗
16. Anchoring carbon nanotubes and post-hydroxylation treatment enhanced Ni nanofiber catalysts towards efficient hydrous hydrazine decomposition for effective hydrogen generation
17. Carbon nanospheres induced high negative permittivity in nanosilver-polydopamine metacomposites10.1016/j.carbon.2019.03.028 ↗
18. Controllable organic magnetoresistance in polyaniline coated poly(p-phenylene-2,6-benzobisoxazole) short fibers10.1039/C9CC04789A ↗
19. Three-dimensional core-shell Fe3O4/polyaniline coaxial heterogeneous nanonets: preparation and high performance supercapacitor electrodes10.1016/j.electacta.2019.05.073 ↗
20. Cement-based sensors with carbon fibers and carbon nanotubes for piezoresistive sensing10.1016/j.cemconcomp.2012.04.007 ↗
21. Research on the conductive Asphalt Concrete’s piezoresistivity effect and its mechanism10.1016/j.conbuildmat.2009.03.006 ↗
22. Electromagnetic interference shielding polymers and nanocomposites-A review10.1080/15583724.2018.1546737 ↗
23. Flexible sandwich structural strain sensor based on silver nanowires decorated with self-healing substrate10.1002/mame.201900074 ↗
24. A review on hydronic asphalt pavement for energy harvesting and snow melting10.1016/j.rser.2015.04.029 ↗
25. Investigation of usability of steel fibers in asphalt concrete mixtures10.1016/j.conbuildmat.2012.04.113 ↗
26. Effects of electrically conductive additives on laboratory-measured properties of asphalt mixtures10.1061/(ASCE)0899-1561(2009)21:10(612) ↗
27. Electrical conductivity of asphalt mortar containing conductive fibers and fillers10.1016/j.conbuildmat.2009.06.014 ↗
28. Investigation of the conductivity of asphalt concrete containing conductive fillers10.1016/j.carbon.2004.12.033 ↗
29. Investigation on electromagnetic and microwave absorption properties of copper slag filled cement mortar10.1016/j.cemconcomp.2016.10.003 ↗
30. Adsorption behaviour between cement and asphalt emulsion in cement-asphalt mortar10.1680/adcr.2007.00034 ↗
31. Preliminary study on asphalt emulsion used in cement asphalt mortar10.1520/JTE000395 ↗
32. Effect of early cement hydration on the chemical stability of asphalt emulsion10.1016/j.conbuildmat.2013.01.009 ↗
33. Composition and reaction mechanism of cement- asphalt mastic10.1016/j.conbuildmat.2009.02.014 ↗
34. Effect of emulsifier on cement hydration in cement asphalt mortar10.1016/j.conbuildmat.2013.04.044 ↗
35. Measurements of DC conductivity of suspensions in non aqueous media10.1016/j.elstat.2009.01.009 ↗
36. Monitoring stability of reaction and dispersion states in a suspension polymerization reactor using electrical resistance tomography measurements10.1016/j.ces.2005.05.016 ↗
37. Electrical conductivity of a concentrated suspension of soft particles10.1006/jcis.2000.7002 ↗
38. Influence of polymer on cement hydration in SBR modified cement pastes10.1016/j.cemconres.2006.05.020 ↗
39. GB175-2007. Common Portland cement. (in Chinese).
40. Quantitative determination of carboxylic acids and their salts and anhydrides in asphalts by selective chemical reactions and differential infrared spectrometry10.1021/ac00229a010 ↗
41. Rheological properties and chemical analysis of nanoclay and carbon microfiber modified asphalt with Fourier transform infrared spectroscopy10.1016/j.conbuildmat.2012.08.004 ↗
42. Micro hardness of interface between cement asphalt emulsion mastics and aggregates10.1617/s11527-009-9502-2 ↗
43. Strength mechanism of cement-asphalt mortar10.1061/(ASCE)MT.1943-5533.0000301 ↗
44. Dental silicate cements: V. electrical conductivity10.1177/00220345680470032001 ↗
45. Na2O, K2O, SiO2, and Al2O3 release from potassic and calcic-sodic feldspars into alkaline solutions10.1016/j.cemconres.2010.04.005 ↗
46. Evaluation of selected basalts from the point of alkali-silica reactivity10.1016/j.cemconres.2004.06.013 ↗
47. Study on the interaction between anionic and cationic latex particles and Portland cement10.1016/j.colsurfa.2008.08.005 ↗
48. Adsorption behavior between cement and asphalt emulsion in CA mortar
49. Hydration mechanisms, microstructure, and mechanical properties of mortars prepared with mixed binder cement slurry-asphalt emusion10.1061/(ASCE)0899-1561(2003)15:1(54) ↗
50. Effect of anionic emulsifier on cement hydration and its interaction mechanism10.1016/j.conbuildmat.2015.05.053 ↗
51. Moisture damage assessment using surface energy, bitumen stripping and the SATS moisture conditioning procedure10.1080/10298436.2015.1007235 ↗
52. Investigating the interaction between asphalt binder and fresh and simulated RAP aggregate10.1016/j.matdes.2016.04.102 ↗
53. Effect of surface tension on the measurement of surface energy components of asphalt binders using the Wilhelmy plate method10.1016/j.conbuildmat.2015.08.125 ↗
54. Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsion10.1016/j.conbuildmat.2008.07.020 ↗
55. Strength mechanism of cement-asphalt mortar10.1061/(ASCE)MT.1943-5533.0000301 ↗
56. Investigations on the preparation and mechanical properties of the nano-alumina reinforced cement composite10.1016/j.matlet.2005.08.061 ↗
57. Limewater effects on properties of ZrO2 nanoparticle blended cementitious composite10.1177/0021998310376118 ↗
58. Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume10.1016/j.conbuildmat.2005.09.001 ↗
59. Microwave synthesis of hierarchical porous materials with various structures by controllable desilication and recrystallization10.1016/j.micromeso.2017.11.037 ↗
60. Characterization of photocatalytic and superhydrophilic properties of mortars containing titanium dioxide10.1016/j.cemconres.2008.07.003 ↗
61. Hybrid effect of carbon nanotube and nanoclay on physico-mechanical properties of cement mortar10.1016/j.conbuildmat.2010.06.046 ↗
62. Effects of recycled copper slag as cementitious material in ordinary Portland cement mortar
63. In situ growth of hollow Cu2O spheres using anionic vesicles as soft templates10.1016/j.jiec.2017.10.052 ↗
64. Evaluate the mechanism of the effect of hydrated lime on moisture damage of warm mix asphalt10.1016/j.conbuildmat.2013.05.079 ↗
65. The use of surface free energy method to evaluate the mechanism of the effect of hydrate lime on moisture damage of hot mix asphalt10.1061/(ASCE)MT.1943-5533.0000650 ↗
66. A microstructural approach to adherence mechanism of cement and asphalt mortar (CA mortar) to repair materials10.1016/j.conbuildmat.2014.05.020 ↗
67. Evidences of chemical interaction between EVA and hydrating Portland cement10.1016/S0008-8846(02)00805-0 ↗
68. An X-ray diffraction (XRD) and Fourier transform infrared spectroscopic (FT-IR) investigation of the long-term effect on the solidification/stabilization (S/S) of arsenic(V) in Portland cement type-V10.1016/j.scitotenv.2003.09.012 ↗
69. Hydration products in two aged cement pastes10.1007/s10973-005-0957-2 ↗
70. Accelerating effects of colloidal nano-silica for beneficial calcium-silicate-hydrate formation in cement10.1016/j.cplett.2004.05.071 ↗
71. Infrared spectra of asphalts: some aspects of the changes caused by photooxidation10.6028/jres.068C.012 ↗
72. Cement hydration and microstructure formation in the presence of water-soluble polymers10.1016/j.cemconres.2008.10.003 ↗
73. A Fourier transform infrared spectroscopic investigation of the early hydration of Portland cement and the influence of sodium lignosulfonate10.1016/S0008-8846(99)00243-4 ↗