Eco-friendly fired clay bricks incorporated with porcelain ceramic sludge
Source abstract
Abstract
Abstract Due to the limited natural clay resources, a shift to alternative resources for brick clay is a challenge in the construction industry. A possibility of brick clay replacement with ceramic sludge in manufacturing of eco-friendly bricks is investigated by evaluating strength, durability and thermal performances of bricks. For this purpose, clay bricks were manufactured by blending ceramic sludge in five mix proportions: 0%, 20%, 40%, 50% and 60% by weight. Raw materials were characterised by bulk density, specific gravity, sieve analysis, X-Ray Fluoresce (XRF) and X-Ray Diffraction (XRD) while the mixtures were characterised by Atterberg’s limits. The bricks were characterised by dry weight, micro-structure, strength property (compressive strength), durability properties (i.e. water absorption, initial rate of sorption, acid and alkaline resistance, efflorescence), thermal performance and XRD patterns. Reduced dry weight was found with increasing ceramic sludge contents, promising a light weight clay brick. With 40% ceramic sludge, the optimum compressive strength was found to be 2.9 N/mm2, indicating 32% strength improvement, comparing to the conventional brick. At 40% ceramic sludge, water absorption was 20.6%, satisfying the requirement for moderate weathering resistance. The acid and alkaline resistances of bricks increase with increasing ceramic sludge content, indicating that ceramic sludge contributes to increase durability performance of the brick. In addition, the bricks with 40% clay replacement yielded better thermal performances. At 12:30, when the day time temperature is expected to be the highest, 10.1 °C temperature difference was observed for the 40% ceramic sludge blended brick, whereas 4.2 °C difference was observed for the conventional brick. An eco-friendly brick with improved strength, durability and thermal properties can be achieved by 40% replacement of brick clay with ceramic sludge.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Building materials and conservation · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Exploratory study on the effect of waste rice husk and sugarcane bagasse ashes in burnt clay bricks10.1016/j.jobe.2016.08.001 ↗
2. Manufacturing of sustainable clay bricks: utilization of waste sugarcane bagasse and rice husk ashes10.1016/j.conbuildmat.2016.05.084 ↗
3. Strength, durability, thermal and run-off properties of fired clay roof tiles incorporated with ceramic sludge10.1016/j.conbuildmat.2018.05.187 ↗
4. Utilization of water treatment plant sludge in structural ceramics10.1016/j.jclepro.2014.06.018 ↗
5. The use of ceramic sludge and recycled glass to obtain engobes for manufacturing ceramic tiles10.1016/j.jclepro.2014.08.091 ↗
6. Utilization of sludge as brick materials10.1016/S1093-0191(02)00037-0 ↗
7. Removal of toxic metals from industrial sludge by fixing in brick structure10.1016/j.conbuildmat.2012.07.002 ↗
8. Feasibility of using waste glass sludge in production of eco-friendly clay bricks10.1061/(ASCE)MT.1943-5533.0001928 ↗
9. Use of industrial ceramic sludge in brick production: effect on aesthetic quality and physical properties10.1016/j.conbuildmat.2016.07.096 ↗
10. The use of recycled paper processing residues in making porous brick with reduced thermal conductivity10.1016/j.ceramint.2009.02.027 ↗
11. Characterization and evaluation of rice husk ash and wood ash in sustainable clay matrix bricks10.1016/j.ceramint.2016.09.181 ↗
12. Recycling of sugarcane bagasse ash waste in the production of clay bricks10.1016/j.jenvman.2012.01.032 ↗
13. Acid deposition and its effects in China: an overview10.1016/S1462-9011(98)00043-4 ↗
14. Environmental and technical aspects of the utilisation of tannery sludge as a raw material for clay products10.1016/S0955-2219(02)00024-9 ↗
15. World urbanization prospects. New York, United Nations, Department of Economic and Social Affairs (DESA), Population Division, Population Estimates and Projection Sections, 2012.
16. Influence of expanded vermiculite on physical properties and thermal conductivity of clay bricks10.1016/j.ceramint.2014.10.102 ↗
17. Thermal design optimization of lightweight concrete blocks for internal one-way spanning slabs floors by FEM10.1016/j.enbuild.2009.08.005 ↗
18. Thermal comfort in traditional buildings composed of local and modern construction materials10.1016/j.ijsbe.2017.08.001 ↗
19. Effect of waste Rice Husk Ash (RHA) on structural, thermal and acoustic properties of fired clay bricks10.1016/j.jobe.2018.03.019 ↗
20. Thermal performance enhancement of eco-friendly bricks incorporating agro-wastes10.1016/j.enbuild.2017.10.056 ↗
21. Thermally efficient fired clay bricks incorporating waste marble sludge: an industrial-scale study10.1016/j.jclepro.2017.11.060 ↗
22. Effect of waste rice husk ash on structural, thermal and run-off properties of clay roof tiles10.1016/j.conbuildmat.2017.07.169 ↗
23. The use of sewage sludge and marble residue in the manufacture of ceramic tile bodies10.1016/j.clay.2009.10.013 ↗
24. Incorporation of sludge waste from water treatment plant into red ceramic10.1016/j.conbuildmat.2007.01.013 ↗
25. Fired clay bricks manufactured by adding wastes as sustainable construction materials: a review10.1016/j.conbuildmat.2014.03.045 ↗
26. ASTM D4318, Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils, West Conshohocken, U.S.A. 2005.
27. ASTM D422, Standard Test Method for Particle-Size Analysis of Soils, West Conshohocken, U.S.A. 2007.
28. ASTM D854, Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer, West Conshohocken, U.S.A. 2000.
29. ASTM C67-07, Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile, West Conshohocken, U.S.A. 2007.
30. Properties of bricks made by using fly ash, quarry dust and billet scale10.1016/j.conbuildmat.2012.11.077 ↗
31. ASTM C650-04, Standard Test Method for Resistance of Ceramic Tile to Chemical Substances, ASTM international (2014).
32. Thermal performance of insulated roof slabs in tropical climates10.1016/j.enbuild.2007.10.006 ↗
33. Properties of masonry mortars manufactured with fine recycled concrete aggregates10.1016/j.conbuildmat.2014.08.080 ↗
34. Use of sewage sludge ash as brick material
35. Sowers · 1979
36. Fired clay bricks made by adding wastes: assessment of the impact on physical, mechanical and thermal properties10.1016/j.conbuildmat.2016.08.024 ↗
37. Thermal performance evaluation of eco-friendly bricks incorporating waste glass sludge10.1016/j.jclepro.2017.11.255 ↗
38. Properties and environmental impact of the mosaic sludge incorporated into fired clay bricks10.1016/j.conbuildmat.2018.06.171 ↗
39. IS 1077: Indian Standard for Common Burnt clay building bricks: Specifications, 1992.
40. Effects of Chromium (6) reducing agents in cement on corrosion of reinforcing steel10.1016/j.cemconcomp.2011.08.006 ↗
41. Water and solute activities of H2SO4 – Fe2(SO4), 3–H2O and HCl – FeCl3 –H2O solution systems, Part 1: activities in water10.1007/BF02654841 ↗
42. Reactivity of clay minerals with acids and alkalies10.1346/CCMN.1971.0190508 ↗
43. Evaluation of brick resistance to freeze/thaw cycles according to indirect procedures