journal article·2020-01

Corrosion resistance of steel reinforcements embedded in alkali activated ground granulated SiMn slag mortars

R. Navarro, E.G. Alcocel, I. Sánchez, P. Garcés, E. Zornoza

Publisher page

Abstract

The corrosion process of steel reinforcements embedded in alkali activated SiMn slag mortars was investigated. NaOH and waterglass were used as alkali activators of SiMn slag. The steel reinforced mortars were subjected to two aggressive environments: carbonation and chloride ingress. Carbonation progressed quicker for the binder activated with NaOH, decreasing the rate with the concentration. However, during the corrosion of the steels embedded in the mortars, both activators showed a similar behaviour. Mortars prepared with waterglass exhibited higher chloride migration coefficients, which decreased as the activator concentration increased. In a chloride contaminated ambient, steel embedded in mortars prepared with NaOH offered lower corrosion rate levels and it increased with the activator concentration.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Corrosion and Durability · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. A review on alkaline activation: new analytical perspectives10.3989/mc.2014.00314 ↗
2. Geopolymers and other alkali activated materials: why, how, and what?10.1617/s11527-013-0211-5 ↗
3. Alternative concrete based on alkali-activated slag10.3989/mc.2008.v58.i291.104 ↗
4. Strength, pore structure and permeability of alkali-activated slag mortars10.1016/S0008-8846(96)00174-3 ↗
5. Durability of alkali-activated fly ash concrete: Chloride penetration in pastes and mortars10.1016/j.conbuildmat.2014.04.110 ↗
6. Metakaolin and fly ash alkali-activated mortars compared with cementitious mortars at the same strength class10.1016/j.cemconres.2016.07.004 ↗
7. Alkali-activated materials
8. Durability of alkali-activated materials: progress and perspectives10.1111/jace.12831 ↗
9. The role of inorganic polymer technology in the development of “green concrete”10.1016/j.cemconres.2007.08.018 ↗
10. Carbon footprint of geopolymeric mortar: study of the contribution of the alkaline activating solution and assessment of an alternative route10.1039/C4RA03375B ↗
11. Carbon dioxide equivalent (CO2-e) emissions: a comparison between geopolymer and OPC cement concrete10.1016/j.conbuildmat.2013.01.023 ↗
12. Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement10.1016/j.jclepro.2011.02.010 ↗
13. Durability of alkali-activated materials in aggressive environments: a review on recent studies10.1016/j.conbuildmat.2017.07.027 ↗
14. Some applications of potential-pH diagrams to study of localized corrosion10.1149/1.2132800 ↗
15. Influence of fly ash on the water and chloride permeability of alkali-activated slag mortars and concretes10.1016/j.conbuildmat.2013.07.106 ↗
16. Effect of alkali dosage and silicate modulus on carbonation of alkali-activated slag mortars10.1016/j.cemconres.2018.07.005 ↗
17. MgO content of slag controls phase evolution and structural changes induced by accelerated carbonation in alkali-activated binders10.1016/j.cemconres.2013.12.003 ↗
18. Natural carbonation of aged alkali-activated slag concretes10.1617/s11527-013-0089-2 ↗
19. Carbonation process of alkali-activated slag mortars10.1007/s10853-005-1821-2 ↗
20. Resistance of alkali-activated slag concrete to carbonation10.1016/S0008-8846(01)00574-9 ↗
21. Chloride diffusivity, chloride threshold, and corrosion initiation in reinforced alkali-activated mortars: Role of calcium, alkali, and silicate content10.1016/j.cemconres.2018.06.009 ↗
22. Uptake of chloride and carbonate by Mg-Al and Ca-Al layered double hydroxides in simulated pore solutions of alkali-activated slag cement10.1016/j.cemconres.2017.05.015 ↗
23. Chloride transport and the resulting corrosion of steel bars in alkali activated slag concretes10.1617/s11527-015-0747-7 ↗
24. Electrochemical behaviour of a novel alloy steel in alkali-activated slag mortars10.1016/j.cemconcomp.2018.06.004 ↗
25. Steel corrosion behaviour in carbonated alkali-activated slag concrete10.1016/j.corsci.2009.05.033 ↗
26. Influence of slag composition on the stability of steel in alkali-activated cementitious materials10.1007/s10853-017-1919-3 ↗
27. Optimization of the alkali activation conditions of ground granulated SiMn slag10.1016/j.conbuildmat.2017.06.064 ↗
28. Development of alkali activated cement from mechanically activated silico-manganese (SiMn) slag10.1016/j.cemconcomp.2013.03.026 ↗
29. Mechanical properties of alkali activated ground SiMn slag mortars with different types of aggregates10.1016/j.conbuildmat.2018.07.093 ↗
30. Properties of blast-furnace slags containing high amounts of manganese10.1016/S0008-8846(98)00096-9 ↗
31. Escorias de alto horno: composición y comportamiento hidráulico10.3989/mc.1993.v43.i229.687 ↗
32. Factors affecting the strength of alkali-activated slag10.1016/0008-8846(94)90026-4 ↗
33. Rietveld quantitative amorphous content analysis10.1107/S0021889801002485 ↗
34. UNE 80225:2012. Methods of testing cement. Chemical analysis. Determination of reactive SiO2 content in cements, puzzolanas and fly ash, (2012).
35. UNE 196-2:2014. Method of testing cement. Part 2: Chemical analysis of cement, (2014).
36. UNE EN 196-6:2010. Methods of testing cement. Part 6: Determination of fineness, (2010).
37. UNE 146301:2002. Aggregates. Fineness modulus of the fine aggregate, (2002).
38. UNE-EN 1097-6:2014. Tests for mechanical and physical properties of aggregates. Part 6: Determination of particle density and water absorption, (2014).
39. EN 196-1:2005. Methods of testing cement. Part 1: determination of strength, (2005).
40. UNE 112011:1994. Corrosión en armaduras. Determinación de la profundidad de carbonatación en hormigones endurecidos y puestos en servicio, (1994).
41. Electrochemical polarization 1. A theoretical analysis of the shape of polarization curves10.1149/1.2428496 ↗
42. NT Build 492, Concrete, mortar and cement-based repair materials: Chloride migration coefficient from non-steady-state migration experiments, Nord. Method. (1999) 1–8. doi: UDC 691.32/691.53/691.54.
43. UNE-EN 1015-18:2003. Methods of test for mortar for masonry. Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar, (2003).
44. A study on carbonation depth prediction for fly ash concrete10.1016/j.conbuildmat.2005.01.052 ↗
45. Carbonation of concrete containing mineral admixtures10.1061/(ASCE)0899-1561(2003)15:2(134) ↗
46. Pore structure controlling the carbonation of a hardened cement matrix blended with mineral admixture10.1680/adcr.1999.11.2.81 ↗
47. Carbonation of concretes in the Mexican Gulf10.1016/S0360-1323(99)00009-8 ↗
48. Gel nanostructure in alkali-activated binders based on slag and fly ash, and effects of accelerated carbonation10.1016/j.cemconres.2013.06.007 ↗
49. Effect of carbonation on alkali-activated slag paste10.1111/j.1551-2916.2006.01214.x ↗
50. Advances in understanding alkali-activated materials10.1016/j.cemconres.2015.04.013 ↗
51. Pore solution in alkali-activated slag cement pastes. Relation to the composition and structure of calcium silicate hydrate10.1016/S0008-8846(03)00254-0 ↗
52. Thermodynamic modelling of alkali-activated slag cements10.1016/j.apgeochem.2015.06.006 ↗
53. Carbonation characteristics of alkali-activated blast-furnace slag mortar10.1155/2014/326458 ↗
54. Quantification of concrete chloride diffusion coefficient – a critical review10.1016/j.cemconcomp.2019.03.011 ↗
55. Corrosion rate monitoring in the laboratory and on-site10.1016/0950-0618(95)00044-5 ↗
56. Steel corrosion in reinforced alkali-activated materials10.21809/rilemtechlett.2017.39 ↗
57. P. Hlaváček, S. Reinemann, G.J.G. Gluth, M. Rünger, G. Ebell, J. Mietz, H. ‐C. Kühne, Durability‐related properties of geopolymer mortars, in: 6th Int. Conf. Non-Traditional Cem. Concr. Brno, Czech Repub., 2017.
58. The Influence of the ratio [Cl-]/[OH-] on the corrosion rate of reinforcing steel in neutral and acid solutions10.4028/www.scientific.net/MSF.192-194.907 ↗