journal article·2019-12Open access

Laboratory evaluation of dry process crumb rubber modified mixtures containing Warm Mix Asphalt Additives

Hande Isik Ozturk, Farshad Kamran

Abstract

Abstract Crumb rubber (CR) usage in asphalt pavement sector is an environmentally friendly and economical solution. However, the production temperatures are significantly higher than the traditional mixtures. Thus, the focus of this study is to use Warm Mix Asphalt (WMA) additives in dry process CR modified mixtures to overcome high temperature needs without compromising the performance. Effect of WMA additive on conditioning time, mixing and compaction temperatures, and also rutting and cracking potentials were investigated by experiments. As a conclusion, the compaction temperature could be lowered by 15 °C and WMA additive can be used as compaction aid to lower the compaction effort.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. RMA · 2018
2. Williams · 2018
3. Properties of rubberized warm asphalt binders: a preliminary analysis
4. Estimating correlations between rheological and engineering properties of rubberized asphalt concrete mixtures containing warm mix asphalt additive10.1016/j.conbuildmat.2010.06.087 ↗
5. Investigation of the rheological modification mechanism of warm-mix additives on crumb-rubber-modified asphalt10.1061/(ASCE)MT.1943-5533.0000808 ↗
6. Effects of types and content of warm-mix additives on CRMA10.1061/(ASCE)MT.1943-5533.0000765 ↗
7. Characterization of the effect of foaming water content on the performance of foamed crumb rubber modified asphalt10.1016/j.conbuildmat.2014.03.046 ↗
8. Fatigue behavior of rubberized asphalt concrete mixtures containing warm asphalt additives10.1016/j.conbuildmat.2009.06.036 ↗
9. Hicks · 2010
10. Use of a warm mix asphalt additive to reduce the production temperatures and to improve the performance of asphalt rubber mixtures10.1016/j.jclepro.2012.09.047 ↗
11. A comparison of emissions from hot mixture and warm asphalt mixture production
12. WAM foam asphalt production at lower operating temperatures as an environmental friendly alternative to HMA
13. Cooling down the mix: NAPA explores new “warm mix asphalt“ technologies developed in Europe
14. Prowell · 2007
15. EAPA · 2017
16. R. West, C. Rodezno, G. Julian, B. Prowell, B. Frank, L.V. Osborn, T. Kriech, Field Performance of Warm Mix Asphalt Technologies. Publication NCHRP Report 779, National Cooperative Highway Research Program, 2014.
17. Analysis of digestion time and the crumb rubber percentage in dry-process crumb rubber modified hot bituminous mixes10.1016/j.conbuildmat.2010.11.029 ↗
18. Influence of crumb rubber and digestion time on the asphalt rubber binders10.1080/14680629.2006.9690030 ↗
19. ASTM International · 2015
20. ASTM International · 2015
21. ASTM International · 2014
22. ASTM International · 2014
23. ASTM International · 2017
24. ASTM International · 2019
25. ASTM International · 2018
26. ASTM International · 2018
27. Prowell · 2012
28. J. Shaw, Sasobit-Sasol Wax Americas, WMA Technical Working Group Meeting, 2007.
29. Evaluation of potential processes for use in warm mix asphalt
30. Evaluation of compaction benefits of foamed asphalt mixtures at varying production temperatures
31. Roberts · 1996
32. Huner · 2001
33. Bahia · 2001
34. Effects of temperature and pressure on hot mixed asphalt compaction: field and laboratory study10.1061/(ASCE)0899-1561(2008)20:6(440) ↗
35. ASTM International · 2015
36. Australian Standard · 1995
37. Evaluation of permanent deformation characteristics of unmodified and polyethylene terephthalate modified asphalt mixtures using dynamic creep test10.1016/j.matdes.2013.07.015 ↗
38. Tertiary flow characteristics of asphalt mixtures
39. A simple stepwise method to determine and evaluate the initiation of tertiary flow for asphalt mixtures under dynamic creep test10.1016/j.conbuildmat.2009.06.020 ↗
40. Biligiri · 2007
41. Analytical modelling and experimental study of tensile strength of asphalt concrete composite at low temperatures10.1016/S1359-8368(03)00079-9 ↗
42. Investigation of rutting performance of asphalt mixtures containing polymer modifiers10.1016/j.conbuildmat.2005.08.014 ↗
43. A study of asphalt aging using indirect tensile strength test10.1016/j.conbuildmat.2015.07.159 ↗
44. ASTM International · 2017