MgO-ZrO2 refractory ceramics based on recycled magnesia-carbon bricks
Source abstract
Abstract
Abstract Magnesia-carbon (MgO-C) refractories are used in the steel industry, where, after their life cycle, they are replaced by new ones. Consequently, a large amount of spent MgO-C is produced and stored in landfills. This waste may be re-used as a potential source of secondary magnesia. In this study, calcined MgO-C waste was used to prepare magnesia-zirconia refractories. It was applied as an individual component of raw materials mix or in the form of fused magnesia-zirconia co-clinker, from which new refractories were produced. After firing at 1660 °C, properties like linear shrinkage, open porosity, apparent density, cold crushing strength, thermal shock resistance, pore size distribution, microstructure as well as resistance to corrosion were measured and determined. The research results indicate that recycling of spent MgO-C refractories is possible as we have obtained a material with satisfactory properties, which can be additionally improved by zirconia addition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Magnesium Oxide Properties and Applications · Nuclear materials and radiation effects
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Map of critical raw material deposits in Europe10.1016/j.egypro.2016.10.016 ↗
2. MagForum 2017
3. China’s increasing environmental focus sends shockwaves through the refractory industry
4. Przemysł materiałów ogniotrwałych – problematyka badań i rozwoju (Refractory industry – research and development)
5. Review of refractoris markets & research – 2016
6. Spent magnesia-carbon refractory bricks from steel production: potentiality of MgO-clinker recovery
7. Raw materials for refractories: the European perspective
8. Routschka · 2004
9. Surendranathan · 2015
10. Modyfied magnesia refractory materials
11. Influence of zirconia addition on the properties of magnesia refractories10.1016/j.ceramint.2016.04.065 ↗
12. Fused magnesia-zirconia co-clinker for fired refractories10.1016/j.ceramint.2017.07.175 ↗
13. MgAl2O4 spinel as an effective ceramic bonding in a MgO-CaZrO3 refractory10.1016/j.jeurceramsoc.2013.04.027 ↗
14. Recycling of refractory bticks used in basic steelmaking: a review10.1016/j.resconrec.2018.09.025 ↗
15. Characterization, microstructure and corrosion behaviour of magnesia refractories produced from recycled refractory aggregates10.1016/j.mineng.2009.11.001 ↗
16. Recycling MgO-C refractory in electric arc furnaces10.1016/j.resconrec.2006.03.002 ↗
17. Recycling MgO-C refractories and dolomite fines as slag foaming conditioners: experimental thermodynamic evaluations10.1016/j.ceramint.2013.03.080 ↗
18. Specification of MgO-concentrate obtained from post mortem MgO-C refractory materials10.13168/cs.2018.0035 ↗
19. Recycling practices of spent MgO-C refractories
20. Recent improvement of recycling technology for refractories
21. Recycling of spent magnesite and ZAS bricks for the production of new basic refractories10.1016/j.ceramint.2004.11.004 ↗
22. Kinetics and mechanism of carbothermic reduction of magnesia10.1007/s11663-003-0069-y ↗
23. The carbotheric route to magnesium10.1007/s11837-006-0024-x ↗
24. An experimental study on hydration of various magnesia raw materials
25. Experimental and theoretical aspects of the stabilization of zirconia10.1023/A:1004698026465 ↗
26. Crystal structure of zirconia phases and their inter-relation10.4028/www.scientific.net/KEM.153-154.1 ↗
27. Structural properties of MgO-ZrO2 ceramics obtained by conventional sintering, arc melting and field assisted sintering technique10.1016/j.matdes.2016.03.106 ↗
28. Sintering mechanism of ZrO2·MgO with addition of TiO2 and CuO10.1016/j.ceramint.2003.08.005 ↗
29. Controllable preparation of Al2O3-MgO·Al2O3-CaO·6Al2O3 (AMC) composite with improved slag penetration resistance10.1111/ijac.12427 ↗
30. Effectively controlling the crystal growth of Cr2O3 using SiO2 as the second phase10.1111/jace.16060 ↗