journal article·2020-01

Mechanical performance and shear constitutive model study of a new high-capacity polyurethane elastomeric bearing

Yong Yuan, Siqi Wang, Ping Tan, Hongping Zhu

Publisher page

Abstract

Abstract To develop high vertical capacity bridge isolation bearing, a new polyurethane elastomer (PUE) material with improved shear performance was introduced. This paper focuses on the mechanical properties and the shear constitutive model of the PUE material and the new bearings. Four isolation bearings with different design parameters made from the PUE material were produced to evaluate the vertical bearing capacity and horizontal shear performance. Further studies on the mechanical properties of the PUE material revealed that the new material has stable yield stress and strong rate-dependent features. From the experimental results, a rheological shear constitutive model was proposed for the PUE material to describe its highly non-linear rate-dependent properties. Parameter identification tests, such as multi-step relaxation tests, cyclic shear tests, and simple relaxation tests, were conducted to identify the model parameters. Finally, the accuracy of the proposed constitutive model was verified by the isolation bearings experimental. Results indicate the PUE bearing has a large vertical bearing capacity, promising horizontal deformability and energy dissipation capacity. The proposed rheological model accurately described the highly non-linear and rate-dependent shear mechanical properties of the new PUE bearing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Engineering and Vibration Analysis · Vibration Control and Rheological Fluids · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Reconnaissance report on damage of bridges in 2008 Wenchuan, China, earthquake10.1080/13632460902859169 ↗
2. Recent advances in nonlinear passive vibration isolators10.1016/j.jsv.2008.01.014 ↗
3. Accumulative response of large offshore steel bridge under severe earthquake and ship impact due to earthquake-induced tsunami flow10.1016/j.engstruct.2016.12.047 ↗
4. Experimental study on horizontal performance of multi-dimensional earthquake isolation and mitigation devices for long-span reticulated structures10.1177/1077546311418868 ↗
5. Experimental investigation on effects of elastomer components on dynamic and mechanical properties in seismic isolator compounds10.1016/j.conbuildmat.2016.12.184 ↗
6. The use of polyurethane for structural and infrastructural engineering applications: A state-of-the-art review10.1016/j.conbuildmat.2018.09.166 ↗
7. Resilient bridge rocking columns with polyurethane damage-resistant end segments and replaceable energy-dissipating links10.1061/(ASCE)BE.1943-5592.0001069 ↗
8. Damping and mechanical properties of composite composed of polyurethane matrix and preplaced aggregates10.1016/j.conbuildmat.2017.03.233 ↗
9. Polyurethane elastomers10.1016/0079-6700(91)90011-9 ↗
10. Constitutive modeling of the tensile and compressive deformation behavior of polyurea over a wide range of strain rates10.1016/j.conbuildmat.2017.06.055 ↗
11. Cyclic compressive behavior of polyurethane rubber springs for smart dampers
12. Optimization of the synthesis of polyurethane for passive isolation bearings
13. Polyurethane materials using aliphatic diisocyanates for passive isolation in buildings applications
14. Effects of fillers on polyurethane resin-based polyurethane elastomeric bearing materials for passive isolation10.1177/0021998308096329 ↗
15. XZ · 2015
16. Stress–strain behavior of thermoplastic polyurethanes10.1016/j.mechmat.2004.08.001 ↗
17. Deformation mechanisms of thermoplastic elastomers: stress-strain behavior and constitutive modeling10.1016/j.polymer.2017.08.065 ↗
18. Scratch behavior of model polyurethane elastomers containing different soft segment types10.1016/j.matdes.2017.07.016 ↗
19. Strain rate dependent constitutive model for predicting the material behaviour of polyurea under high strain rate tensile loading10.1016/j.matdes.2013.07.020 ↗
20. BS. ISO 37:2017 Rubber, vulcanized or thermoplastic—Determination of tensile stress-strain properties, 2017.
21. BS. ISO 1827:2007 Determination of Shear Modulus and Adhesion to Rigid Plates – Quadruple-Shear Methods, 2007.
22. CEN. EN1337-3:2005 Structural bearings-Part 3: Elastomeric bearings, 2005.
23. A rate-dependent constitutive model of high damping rubber bearings: modeling and experimental verification10.1002/eqe.2744 ↗
24. Stress softening behaviour of HDNR bearings: modelling and influence on the seismic response of isolated structures10.1002/eqe.2897 ↗
25. CHN I. GB 20688.2-2006 Rubber bearings – Part 2: Elastomeric seismic-protection isolators for bridges, 2007.
26. A rheology model of high damping rubber bearings for seismic analysis: identification of nonlinear viscosity10.1016/j.ijsolstr.2009.01.005 ↗
27. An improved rheology model for the description of the rate-dependent cyclic behavior of high damping rubber bearings10.1016/j.soildyn.2015.06.001 ↗
28. A generalized rate-dependent constitutive law for elastomeric bearings10.1016/j.conbuildmat.2015.12.179 ↗
29. CAS. GB 20688-2:2005 Rubber bearings- Part 2: elastomeric seismic- protection isolators for bridges, 2006.