Contribution of core/shell TiO2@SiO2 nanoparticles to the hydration of Portland cement
Source abstract
Abstract
Abstract This paper presented the contribution of core/shell TiO2@SiO2 nanoparticles to the hydration properties of Portland cement and the contribution was compared with that of nano-TiO2. Both nanoparticles were used to partially replace cement at 1 wt%. The mechanical property and microstructure of the cement pastes were experimentally characterized using compressive strength and scanning electron microscope (SEM), respectively. Specially, thermodynamic modeling was also applied to predict the phase assemblages and calculate the corresponding volumes. The results showed that the paste with 1 wt% TiO2@SiO2 developed a much higher compressive strength than the paste with or without nano-TiO2 added at each curing age. Both SEM and mapping analyses showed that obvious agglomeration of nano-TiO2 could be observed in nano-TiO2 modified cement paste, which decreased its efficiency in the cement paste. However, nano-TiO2 was well distributed when TiO2@SiO2 was added because of its limiting effect on the agglomeration of nano-TiO2, further densifying the microstructure. The calculated hydrates volumes by thermodynamic modeling also indicated that TiO2@SiO2 would result in producing most hydrates of all the pastes, thus contributing to a denser microstructure and a much higher compressive strength development.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Nanoparticles as concrete additives: Review and perspectives10.1016/j.conbuildmat.2018.04.214 ↗
2. A review on nanomaterial dispersion, microstructure, and mechanical properties of carbon nanotube and nanofiber reinforced cementitious composites
3. Core/shell nanoparticles: classes, properties, synthesis mechanisms, characterization, and applications10.1021/cr100449n ↗
4. Thermodynamic modelling of the hydration of Portland cement10.1016/j.cemconres.2005.03.001 ↗
5. Agglomeration and reactivity of nanoparticles of SiO2, TiO2, Al2O3, Fe2O3, and clays in cement pastes and effects on compressive strength at ambient and elevated temperatures10.1016/j.conbuildmat.2018.02.032 ↗
6. Influence of nano-silica agglomeration on microstructure and properties of the hardened cement-based materials10.1016/j.conbuildmat.2012.08.006 ↗
7. Influence of agglomeration of a recycled cement additive on the hydration and microstructure development of cement based materials10.1016/j.conbuildmat.2013.09.004 ↗
8. Effects of pozzolanic and non-pozzolanic nanomaterials on cement-based materials10.1016/j.conbuildmat.2019.04.057 ↗
9. Ultrasound-assisted synthesis of colloidal nanosilica from silica fume: Effect of sonication time on the properties of product10.1016/j.apt.2014.05.011 ↗
10. Combined microfluidization and ultrasonication: a synergistic protocol for high-efficient processing of SWCNT dispersions with high quality10.1007/s11051-016-3562-3 ↗
11. The influences of admixtures on the dispersion, workability, and strength of carbon nanotube-OPC paste mixtures10.1016/j.cemconcomp.2011.09.013 ↗
12. Microstructure and macroscopic properties of hybrid carbon nanofiber/silica fume cement composites10.1016/j.compscitech.2009.03.006 ↗
13. Synthesis of nanoSiO2@PCE core-shell nanoparticles and its effect on cement hydration at early age10.1016/j.conbuildmat.2016.03.093 ↗
14. Characterizing cement paste containing SRA modified nanoSiO2 and evaluating its strength development and shrinkage behavior10.1016/j.cemconcomp.2016.11.001 ↗
15. Effect and mechanism of colloidal silica sol on properties and microstructure of the hardened cement-based materials as compared to nano-silica powder with agglomerates in micron-scale10.1016/j.cemconcomp.2019.02.015 ↗
16. Multi-walled carbon nanotubes functionalized with a ultrahigh fraction of carboxyl and hydroxyl groups by ultrasound-assisted oxidation10.1007/s10853-015-9671-z ↗
17. A carbon nanotube/cement composite with piezoresistive properties
18. Controlling silica coating thickness on TiO2 nanoparticles for effective photodynamic therapy10.1016/j.colsurfb.2013.02.007 ↗
19. Core-shell nanoparticles by silica coating of metal oxides in a dual-stage hydrothermal flow reactor10.1039/C5CC09743F ↗
20. Controlled growth of monodisperse silica spheres in the micron size range10.1016/0021-9797(68)90272-5 ↗
21. Facile synthesis of core-shell structured ZrO2@SiO2 via a modified Stober method10.1016/j.ceramint.2016.01.166 ↗
22. Photocatalytic degradation of methylene blue on TiO2@SiO2 core/shell nanoparticles: synthesis and characterization10.1007/s10854-015-3198-6 ↗
23. Magnetically recoverable core-shell nanocomposites gamma-Fe2O3@SiO2@TiO2-Ag with enhanced photocatalytic activity and antibacterial activity10.1016/j.seppur.2012.10.008 ↗
24. Preparation and thermal stability of the spindle alpha-Fe2O3@SiO2 core-shell nanoparticles10.1016/j.jssc.2013.12.011 ↗
25. Au nanoparticle-embedded SiO2-Au@SiO2 catalysts with improved catalytic activity, enhanced stability to metal sintering and excellent recyclability10.1039/C5RA07175E ↗
26. Superparamagnetic high-magnetization composite microspheres with Fe3O4@SiO2 core and highly crystallized mesoporous TiO2 shell10.1016/j.colsurfa.2012.03.019 ↗
27. Facile method for the synthesis of core/shell Fe3O4@SiO2@SiO2-SH-Au: a super magnetic nanocatalyst for water-medium and solvent-free alkyne hydration10.1007/s13738-016-0851-9 ↗
28. Reactive powder concrete reinforced with nano SiO2-coated TiO210.1016/j.conbuildmat.2017.05.065 ↗
29. Mechanical and microstructural properties of cement pastes containing carbon nanotubes and carbon nanotube-silica core-shell structures, exposed to elevated temperature10.1016/j.cemconcomp.2018.11.006 ↗
30. Influence of core/shell TiO2@SiO2 nanoparticles on cement hydration10.1016/j.conbuildmat.2017.08.124 ↗
31. GEM-Selektor geochemical modeling package: TSolMod library and data interface for multicomponent phase models10.3749/canmin.50.5.1173 ↗
32. GEM-Selektor geochemical modeling package: revised algorithm and GEMS3K numerical kernel for coupled simulation codes
33. Thoenen T, Hummel W, Berner U, Curti E. The PSI/Nagra Chemical Thermodynamic Database 12/07, 2014.
34. Thermodynamic properties of Portland cement hydrates in the system CaO-Al2O3-SiO2-CaSO4-CaCO3-H2O10.1016/j.cemconres.2007.06.002 ↗
35. Stability in the system CaO-Al2O3-H2O10.1016/j.cemconres.2012.09.002 ↗
36. Prediction of cement hydration
37. Effect of nano-SiO2 on the hydration and microstructure of portland cement10.3390/nano6120241 ↗
38. Effects of colloidal nanoSiO(2) on fly ash hydration10.1016/j.cemconcomp.2012.06.013 ↗
39. Hydration of C(3)A-gypsum systems10.1016/j.cemconres.2012.04.005 ↗
40. Influence of limestone on the hydration of Portland cements10.1016/j.cemconres.2008.01.002 ↗