journal article·2020-04Open access

Ductility analysis of vegetal-fiber reinforced raw earth concrete by mixture design

S. Imanzadeh, A. Jarno, A. Hibouche, A. Bouarar, S. Taibi

Abstract

Abstract Building construction technology by raw earth materials is already known and used since ancient times. The raw earth material is abundant, low cost, requires very low energy to manufacture and does not generate waste. Ductility is required for earth building materials in the areas of seismic risks where the earth buildings are particularly vulnerable to earthquakes. Hence, a raw earth treatment by binders and vegetal fibers is one of the techniques applied to improve its strength and ductility. This paper presents the use of mixture design as a tool to evaluate and analyze the plastic behavior of the raw earth material. The ductility is quantified through two ductility indices. The results indicate that an alternative ductility index based on the post-peak behavior of the material could be used to define a ductility criterion to meet specific requirements of the seismic regions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hygrothermal properties of building materials · Innovations in Concrete and Construction Materials · Geotechnical Engineering and Soil Stabilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. Geomaterials in construction and their sustainability, Sustain. Use Tradit
2. A. Hibouche, Sols traités aux liants, Performances hydro-mécaniques et hygro-thermiques, Applications en BTP, Dissertation, Normandie Univ., UNIHAVRE, 2013.
3. The influence of natural reinforcement fibers, gypsum and cement on compressive strength of earth bricks materials10.1016/j.conbuildmat.2015.12.031 ↗
4. Formulating and optimizing the compressive strength of a raw earth concrete by mixture design10.1016/j.conbuildmat.2017.12.088 ↗
5. Thermal conductivity of unfired earth bricks reinforced by agricultural wastes with cement and gypsum10.1016/j.enbuild.2015.07.016 ↗
6. Shrinkage of earth concrete amended with recycled aggregates and superplasticizer: impact on mechanical properties and cracks10.1016/j.matdes.2016.07.025 ↗
7. Lime consumption of different clayey soils10.1016/j.clay.2014.03.024 ↗
8. Lasledj · 2009 · 361
9. Earth building in Spain10.1016/j.conbuildmat.2005.02.006 ↗
10. Identification of the mechanical behavior of rammed earth including water content influence
11. Loccarini · 2017
12. Flexural strength and ductility analysis of spirally reinforced prestressed concrete piles
13. Experimental analysis of Pressed Adobe Blocks reinforced with Hibiscus cannabinus fibers10.1016/j.conbuildmat.2013.10.094 ↗
14. Charlet · 2015
15. Determination of crystallinity in native cellulose from higher plants with diffuse reflectance Fourier transform infrared spectroscopy10.1016/0008-6215(94)80015-4 ↗
16. A simple review of soil reinforcement by using natural and synthetic fibers10.1016/j.conbuildmat.2011.11.045 ↗
17. Tensile and compressive properties of flax fibres for natural fibre reinforced composites10.1023/A:1014925621252 ↗
18. New construction material based on raw earth: cracking mechanisms, corrosion phenomena and physico-chemical interactions
19. Drying, cracks and shrinkage evolution of a natural silt intended for a new earth building material. Impact of reinforcement10.1016/j.conbuildmat.2015.03.115 ↗
20. Mechanical enhancement of cement-stabilized soil by flax fibre reinforcement and extrusion processing10.1617/s11527-015-0564-z ↗
21. Harakeke reinforcement of soil-cement building materials: manufacturability and properties10.1016/j.buildenv.2006.07.033 ↗
22. Strength and ductility of randomly distributed palm fibers reinforced silty-sand soils10.3844/ajassp.2008.209.220 ↗
23. Laboratory study on the relative performance of silty-sand soils reinforced with linen fiber10.1007/s10706-011-9449-2 ↗
24. The earth in the architecture of the historical centre of Lamezia Terme (Italy): characterization for restoration10.1016/j.clay.2010.11.007 ↗
25. Unconfined compressive strength and ductility of fiber-reinforced cemented sand10.1016/j.conbuildmat.2010.07.017 ↗
26. Influence of fiber and cement addition on behavior of sandy soil10.1061/(ASCE)1090-0241(1998)124:12(1211) ↗
27. Computer-simulated flexural tests of partially pre-stressed concrete sections10.1061/JSDEAG.0006103 ↗
28. Behavior of lap-spliced reinforcing bars embedded in high strength concrete
29. Development/splice length of reinforcing bars
30. Strategies for optimizing the mechanical strengths of raw earth-based mortars10.1016/j.conbuildmat.2018.02.055 ↗
31. Tensile and flexural properties of cement composites reinforced with flax nonwoven fabrics10.3390/ma10020215 ↗
32. Myers · 2016
33. L. Eriksson, E. Johansson, N. Kettaneh-Wold, C. Wikström and S. Wold, Design of Experiments: Principles and Applications, Learnways AB, Ume˚a, 2000, pp. 425, ISBN 91-973730-4-4.
34. Experimental investigation on removal of heavy metals (Cu2+, Pb2+, and Zn 2+) from aqueous solution by flax fibres10.1016/j.psep.2017.05.012 ↗
35. Flexural ductility of reinforced concrete beams with lap-spliced bars10.1139/cjce-2013-0074 ↗
36. Standard AFNOR: NF P94-056, Sols: reconnaissance et essais-Analyse granulométrique-Méthode par tamisage à sec après lavage, 1996.
37. Standard AFNOR: XP P94-041, Sols: reconnaissance et essais-Identification granulométrique-Méthode de tamisage par voie humide, 1995.
38. Standard AFNOR: NF P94-057, Sols: reconnaissance et essais-Analyse granulométrique des sols-Méthode par sédimentation, 1992.
39. ASTM D2487-11: Standard classification of soils for engineering purposes (Unified Soil Classification System), 2012.
40. Standard AFNOR: NF EN 459-1, Chaux de construction - Partie 1: définitions, spécifications et critères de conformité, 2012.
41. Standard AFNOR: NF EN197-1, Cement Part 1: composition, specifications, and conformity criteria for common cements, 2001.
42. Standard AFNOR: NF P 15-318, liants hydrauliques ciment à faible chaleur d'hydratation initiale et à teneur en sulfures limitée, 1991.
43. Standard AFNOR: NF EN196-10, Méthodes d'essais des ciments-Partie 10: Détermination de la teneur en chrome (VI) soluble dans l'eau des ciments, 2015.
44. Galactans and cellulose in flax fibres: putative contributions to tensile strength10.1016/S0141-8130(97)00059-7 ↗
45. Plant aggregates and fibers in earth construction: a review10.1016/j.conbuildmat.2016.02.119 ↗
46. Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites10.1016/j.compscitech.2006.06.019 ↗
47. Abbar · 2017 · 1
48. Standard AFNOR: NF EN 934-2, Adjuvants pour béton, mortier et coulis - Partie 2: adjuvants pour bétons. Définitions et exigences, 1998.
49. The adsorption of cement superplasticizers on to mineral dispersions10.1177/026361748900600405 ↗
50. Superplasticizers: how they work and why they occasionally don’t
51. Standard AFNOR: NF P94-420, Détermination de la résistance à la compression uniaxiale, 2000.
52. Standard AFNOR: NF P94-425, Méthodes d’essai pour roches - Détermination du module d’Young et du coefficient de Poisson, 2002.
53. Fiber volume fraction and ductility index of concrete beams10.1016/j.cemconcomp.2015.10.019 ↗
54. Mechanical properties of Kaolinite/fiber soil composite10.1061/(ASCE)0733-9410(1994)120:8(1381) ↗
55. Dynamic strength and ductility of ultra-high performance concrete with flow-induced fiber alignment10.1016/j.ijimpeng.2017.08.009 ↗
56. Effect of material properties on the behaviour of sand–cement–fibre composites10.1680/grim.2004.8.2.77 ↗
57. Flexural ductility design of confined high-strength concrete columns: theoretical modelling10.1016/j.measurement.2015.09.039 ↗
58. Panarese · 1991
59. Effect of moisture content on the mechanical characteristics of rammed earth10.1016/j.conbuildmat.2013.12.067 ↗
60. Standard AFNOR: NF EN 206-1/CN, Béton–Partie 1: Spécification, performances, production et conformité (in French), 2012.
61. Optimizing the formulation of flax fiber-reinforced cement composites10.1016/j.conbuildmat.2013.12.038 ↗
63. Design of grinding factors based on response surface methodology10.1016/j.jmatprotec.2005.02.187 ↗
64. Box · 2005 · pp. 629
65. Software for design of experiments and optimization, Umetrics: http://www.umetrics.com, 2016.
66. Generalized partial least squares regression based on the penalized minimum norm projection10.1016/j.chemolab.2004.01.026 ↗
67. Formulating and optimising the compressive strength of controlled low-strength materials containing mine tailings by mixture design and response surface methods10.1016/j.mineng.2013.07.007 ↗
68. J. Goupy, Plans d'expériences: les mélanges, Paris: DUNOD, 2001, pp. 285.
69. R. A. Fisher, The design of experiments, New York, Hafner: Libraries Australia, 1971, pp. 248.
70. J. Biarez, P. Y. Hicher, Elementary mechanics of soil behaviour: saturated remoulded soils, A.A. Balkema, Amsterdam, Netherlands, 1994, ISBN 90-5410-156-3 (rel.). - ISBN 90-5410-157-1 (br.).
71. Mechanical and hygrothermal behavior of clay – Sunflower (Helianthus annuus) and rape straw (Brassica napus) plaster bio-composites for building insulation10.1016/j.conbuildmat.2017.11.140 ↗
72. A. Beukers, Lightness. The inevitable renaissance of minimum energy structure, Rotterdam: v. Hinte, 1998.