Rutting and fatigue performance evaluation of warm mix asphalt mastic containing high percentage of artificial RAP binder
Source abstract
Abstract
Abstract This study investigated the rutting and fatigue performance of asphalt mastics containing high percentage of artificial reclaimed asphalt pavement (RAP) binder and two types of warm mix asphalt (WMA) additives, R and M. The filler/asphalt ratio (F/A) ranged from 0.0 to 1.5 and the recycled asphalt binder was blended with 50% artificial RAP binder. The Superpave high-temperature performance grade test and multiple stress creep recovery (MSCR) test were carried out to evaluate the rutting resistance of recycled asphalt mastic. An approach to determine the optimum filler/asphalt ratio was also proposed based on the MSCR parameter Jnr-diff. The fatigue performance under strain-controlled and stress-controlled load modes was investigated by linear amplitude sweep (LAS) test and time sweep test. It was found that artificial RAP binder, WMA additive M and mineral fillers could improve the high-temperature performance while the incorporation of WMA additive R would offset the advantage of artificial RAP binder in rutting resistance. The fatigue test results indicated that the effects of artificial RAP binder, WMA additives and mineral fillers on the fatigue cracking resistance of asphalt mastic exhibited different dependencies on the load mode. Besides, the energy-based approaches might be more acceptable for evaluating the fatigue life of asphalt materials according to time sweep test results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Laboratory investigation of cracking resistance of hot-mix asphalt field mixtures containing screened reclaimed asphalt pavement10.1061/(ASCE)MT.1943-5533.0000223 ↗
2. Laboratory evaluation of fatigue characteristics of recycled asphalt mixture10.1016/j.conbuildmat.2007.04.019 ↗
3. Utilization of warm-mix asphalt technology to improve bituminous mixtures containing reclaimed asphalt pavement10.1080/14680629.2016.1162731 ↗
4. Superpave evaluation of higher RAP contents using WMA technologies10.1016/j.conbuildmat.2016.03.024 ↗
5. Laboratory performance of warm mix asphalt containing recycled asphalt mixtures10.1016/j.conbuildmat.2014.04.002 ↗
6. A. Copeland, Reclaimed asphalt pavement in asphalt mixtures: state of the practice, Report No. FHWA-HRT-11-021, Federal Highway Administration, McLean, Virginia, 2011.
7. FHWA, User guidelines for by-product and secondary use materials in pavement construction, FHWA Publication FHWA-RD-97-148, Federal Highway Administration, Washington, DC, 2008.
8. Use of a warm mix asphalt additive to reduce the production temperatures and to improve the performance of asphalt rubber mixtures10.1016/j.jclepro.2012.09.047 ↗
9. B.D. Prowell, Warm mix asphalt, The International Technology Scanning Program Summary Report, American Trade Initiatives, Alexandria, USA, 2007.
10. Influence of antistripping additives on moisture susceptibility of warm mix asphalt mixtures10.1061/(ASCE)MT.1943-5533.0000111 ↗
11. Evaluation of potential processes for use in warm mix asphalt
12. Evaluation of foamed warm mix asphalt with reclaimed asphalt pavement: field and laboratory experiments10.1080/14680629.2017.1389077 ↗
13. Using warm-mix asphalt technology to incorporate high percentage of reclaimed asphalt pavement material in asphalt mixtures10.3141/2051-09 ↗
14. J. D’Angelo, E. Harm, J. Bartoszek, G. Baumgardner, M. Corrigan, J. Cowsert, et al., Warm-mix asphalt: European practice, International Technology Scanning Program, Federal Highway Administration, 2007.
15. Laboratory performance analysis of high percentage artificial RAP binder with WMA additives10.1016/j.conbuildmat.2017.04.142 ↗
16. Laboratory evaluation of moisture susceptibility of foamed warm mix asphalt containing high percentages of RAP10.1016/j.conbuildmat.2012.02.095 ↗
17. Evaluation of warm mix asphalt mixtures containing reclaimed asphalt pavement through mechanical performance tests and an acoustic emission approach10.1061/(ASCE)MT.1943-5533.0000757 ↗
18. Performance of high RAP-WMA surface mixtures
19. Comparative evaluation of warm mix asphalt containing high percentages of reclaimed asphalt pavement10.1016/j.conbuildmat.2013.03.010 ↗
20. Fatigue performance of asphalt mixture containing recycled materials and warm-mix technologies under accelerated loading and four point bending beam test10.1016/j.jclepro.2018.04.070 ↗
21. Evaluating the effects of using recycled asphalt pavements on fatigue properties of warm mix asphalt
22. Research on high- and low-temperature properties of asphalt-mineral filler mastic10.1061/(ASCE)MT.1943-5533.0000015 ↗
23. Influence of filler-bitumen ratio on performance of modified asphalt mortar by additive10.1007/s40534-013-0002-2 ↗
24. Influence of the properties of filler on high and medium temperature performances of asphalt mastic10.1016/j.conbuildmat.2016.05.041 ↗
25. Investigation of rutting, fracture and thermal cracking behavior of asphalt mastic containing basalt and hydrated lime fillers10.1016/j.conbuildmat.2017.03.032 ↗
26. Fatigue resistance investigation of warm-mix recycled asphalt binder, mastic, and fine aggregate matrix10.1111/ffe.12692 ↗
27. Effect of mineral filler on changes in molecular size distribution of asphalts during oxidative ageing10.1080/14680629.2015.1076998 ↗
28. AASHTO, Standard specification for Superpave volumetric mix design, AASHTO M323-07, Washington, DC, 2007.
29. Ranking the rheological response of SBS- and EVA-modified bitumen using MSCR and LAS tests10.1061/(ASCE)MT.1943-5533.0002367 ↗
30. Performance evaluation of polymer-modified binder containing reclaimed asphalt pavement using multiple stress creep recovery and linear amplitude sweep tests10.1061/(ASCE)MT.1943-5533.0002176 ↗
31. Investigating impacts of warm-mix asphalt technologies and high reclaimed asphalt pavement binder content on rutting and fatigue performance of asphalt binder through MSCR and LAS tests10.1016/j.jclepro.2019.02.131 ↗
32. Huang · 2004
33. Identifying fatigue failure in asphalt binder time sweep tests10.1016/j.conbuildmat.2016.06.020 ↗
34. Measuring and defining fatigue behavior of asphalt binders10.3141/1810-05 ↗
35. A dissipated energy approach to study HMA healing in fatigue10.1177/0361198106197000119 ↗
36. Damage characteristics of waste engine oil bottom rejuvenated asphalt binder in the non-linear range and its microstructure10.1016/j.conbuildmat.2018.04.056 ↗
37. Forensic study on the cracking of New Jersey’s long-term pavement performance specific pavement study sections10.3141/2371-09 ↗
38. A study to compare virgin and target asphalt binder obtained from various RAP blending charts10.1016/j.conbuildmat.2019.07.038 ↗
39. Effects of recycled asphalt pavements on the fatigue life of asphalt under different strain levels and loading frequencies10.1016/j.ijfatigue.2015.04.004 ↗
40. Effect of mineral filler on damage resistance characteristics of asphalt binders
41. Fatigue comparisons of mortars at different volume concentration of aggregate particles10.1016/j.ijfatigue.2017.08.005 ↗
42. Fatigue characteristics of bitumen-filler mastics and asphalt mixtures10.1061/(ASCE)MT.1943-5533.0000450 ↗