Identification of microstructural characteristics in semi-flexible pavement material using micromechanics and nano-techniques
Source abstract
Abstract
Abstract Semi-flexible pavement (SFP) has been promoted to apply in pavement engineering mainly for its excellent performance in rutting resistance. However, due to the material characteristics of three-phase heterogeneous phase and the structural characteristics of dense skeleton interlocking structure, the microstructure of semi-flexible pavement material is complicated, greatly influencing the mechanical properties of the material. This research aims to identify the two characteristics of SFP employing micromechanical models as well as nano-techniques, including nanoindentation (NI), Scanning Electron Microscope (SEM) and energy dispersive spectrum analysis (EDS). Two interlocking factors were introduced in the three-phase micromechanical model to characterize the interlocking effect. Identification of the asphalt mastic phase in SFP was implemented as the basis of stiffening correction in the micromechanical model. Because four different layers were found in the asphalt phase of SFP that was difficult to simulate, a general stiffening correction was used in the improved micromechanical model. The final model considering the interlocking and asphalt stiffening effects can characterize the property of SFP well. It was found that grouting cement has an enhancement function on the viscoelastic interlocking effect while does little on the elastic interlocking effect. Meanwhile, more grouting cement will lead to more asphalt-cement stiffening effect. An equivalent dynamic modulus of the asphalt phase-phase from the micromechanical model was proposed in the end, which has been proven corresponding to the experimental results of NI test.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Tribology and Wear Analysis · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Jointless Pavements for Heavy-Duty Airport Application: The Semi-Flexible Approach
2. Design and performance validation of high-performance cement paste as a grouting material for semi-flexible pavement10.1016/j.conbuildmat.2016.09.036 ↗
3. Setyawan · 2006
4. Development of a semi-flexible heavy duty pavement surfacing incorporating recycled and waste aggregates–Preliminary study10.1016/j.conbuildmat.2015.10.165 ↗
5. Comprehensive service properties evaluation of composite grouting materials with high-performance cement paste for semi-flexible pavement10.1016/j.conbuildmat.2017.07.122 ↗
6. Asessing the compressive strength properties of semi-flexible pavements10.1016/j.proeng.2013.03.079 ↗
7. Formulation and performance comparison of grouting materials for semi-flexible pavement10.1016/j.conbuildmat.2016.04.062 ↗
8. Micromechanical modeling of complex modulus of crumb rubber modified bitumen considering the chemo-physical interaction10.1016/j.matdes.2019.108467 ↗
9. Use of nanoindentation phase characterization and homogenization to estimate the elastic modulus of heterogeneously decalcified cement pastes10.1016/j.matdes.2018.01.030 ↗
10. Nanoindentation investigation of asphalt binder and mastic viscoelasticity10.1080/10298436.2014.993393 ↗
11. Understanding asphalt mastic behavior through micromechanics10.3141/1681-19 ↗
12. Micromechanical creep models for asphalt-based multi-phase particle-reinforced composites with viscoelastic imperfect phase10.1016/j.ijengsci.2013.11.011 ↗
13. Prediction of dynamic modulus of asphalt mixture using micromechanical method with radial distribution functions10.1617/s11527-019-1348-7 ↗
14. Three-dimensional micromechanical complex-modulus prediction of asphalt concrete considering the aggregate interlocking effect10.1061/(ASCE)MT.1943-5533.0001997 ↗
15. Investigation on reinforcing mechanisms of semi-flexible pavement material through micromechanical model10.1016/j.conbuildmat.2018.11.243 ↗
16. Shen · 2005
17. ASTM D7175. Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer. ASTM International, West Conshohocken, USA, 2015.
18. Simple performance tests: summary of recommended methods and database
19. AASHTO T 342-11. Standard Method of Test for Determining Dynamic Modulus of Hot Mix Asphalt (HMA). American Association of State Highway and Transportation Officials, Washington D.C., USA, 2011
20. Effects of Dwell Time and Loading Rate on the Nanoindentation Behavior of Asphaltic Materials10.1061/(ASCE)NM.2153-5477.0000054 ↗
21. Characterization of asphalt materials’ moisture susceptibility using multiple methods10.1016/j.conbuildmat.2017.08.032 ↗
22. A simple phenomenological approach to nanoindentation creep10.1016/j.msea.2004.04.070 ↗
23. Modeling nanoindentation creep behavior of asphalt binder10.1520/ACEM20130060 ↗
24. Identification of interfacial transition zone in asphalt concrete based on nano-scale metrology techniques10.1016/j.matdes.2017.05.015 ↗
25. Pore segmentation of cement-based materials from backscattered electron images10.1016/j.cemconres.2005.10.006 ↗
26. Characterization of triaxial stress state linear viscoelastic behavior of asphalt concrete10.1061/(ASCE)MT.1943-5533.0001776 ↗
27. General “2S2P1D” model and relation between the linear viscoelastic behaviours of bituminous binders and mixes
28. Pronk · 2006
29. Damage mechanics of cement concrete modeled as a four-phase composite10.1016/j.compositesb.2014.02.006 ↗
30. Mura · 1987
31. Microstructural analysis of interfacial transition zone (ITZ) and its impact on the compressive strength of lightweight concretes10.1016/j.conbuildmat.2017.01.101 ↗
32. Tschoegl · 1989
33. Characterizing rheological behavior of asphalt binder over a complete range of pavement service loading frequency and temperature10.1016/j.conbuildmat.2016.07.047 ↗
34. Yiren · 2017