Permeability prediction of hydrated cement paste based on its 3D image analysis
Source abstract
Abstract
Abstract Porous volume of hydrated cement paste is an important passage of fluid transport and thus needs to be characterized, aiming to predict its permeability, analyze its fluid mechanism and evaluate its contribution to fluid transport of cement-based materials. First, hydrated cement paste is applied to FIB/SEM (Focused Ion Beam) observation, REV (Representative Element Volume) analysis and pore size characterization. Then, we apply Katz-Thompson Equation and LBM (Lattice Boltzmann Method) to predict its permeability based on 3D porous volume, respectively. Finally, the influence of pore size on fluid transport of hydrated cement paste is analyzed and further discussed. Results show that single FIB/SEM sample can hardly be representative of hydrated cement paste. CPSD (Continues Pore Size Distribution) gives proper pore size distribution of hydrated cement paste, which is underestimated by MIP (Mercury Intrusion Porosimetry) and simulated MIP. LBM provides more details than the prediction of Katz-Thompson equation and gives a permeability in the range of 0.7–5.7 × 10−18 m2. Analysis of pore size effect shows that the medium and large capillary pores of 50–150 nm have great influence on the permeability and thus are the main passage of fluid transport in hydrated cement paste.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Concrete and Cement Materials Research · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Effect of pore structures on gas permeability and chloride diffusivity of concrete10.1016/j.conbuildmat.2017.12.111 ↗
2. Mehta · Concr. Microstruct. Properties Mater. · 2017
3. 3D experimental investigation of the microstructure of cement pastes using synchrotron X-ray microtomography (μCT)10.1016/j.cemconres.2006.10.012 ↗
4. Mesoscale texture of cement hydrates10.1073/pnas.1520487113 ↗
5. C-S–H gel densification: The impact of the nanoscale on self-desiccation and sorption isotherms10.1016/j.cemconres.2018.04.014 ↗
6. New pore structure assessment methods for cement paste10.1061/(ASCE)MT.1943-5533.0000982 ↗
7. Microstructure-based fractal models for heat and mass transport properties of cement paste10.1016/j.ijheatmasstransfer.2018.05.150 ↗
8. Numerical simulation of hydration and microstructural development in hardening cement-based materials (I) theory10.1016/0008-8846(95)00017-8 ↗
9. Microstructure-based modeling of permeability of cementitious materials using multiple-relaxation-time lattice Boltzmann method10.1016/j.commatsci.2012.09.033 ↗
10. µic: A new platform for modelling the hydration of cements10.1016/j.cemconres.2008.12.002 ↗
11. S. Bishnoi, Vector modelling of hydrating cement microstructure and kinetics. 2008, École polytechnique fédérale de Lausanne.
12. Three-dimensional computer simulation of portland cement hydration and microstructure development10.1111/j.1151-2916.1997.tb02785.x ↗
13. Two-scale analysis of a tight gas sandstone
14. Investigation of internal curing effects on microstructure and permeability of interface transition zones in cement mortar with SEM imaging, transport simulation and hydration modeling techniques10.1016/j.conbuildmat.2014.12.014 ↗
15. Computational investigation of pore permeability and connectivity from transmission X-ray microscope images of a cement paste specimen10.1016/j.conbuildmat.2014.06.049 ↗
16. 3D imaging of cement-based materials at submicron resolution by combining laser scanning confocal microscopy with serial sectioning10.1111/jmi.12228 ↗
17. 3D pore structure and mass transport properties of blended cementitious materials10.1016/j.cemconres.2018.12.007 ↗
18. Pore network of cement hydrates in a High Performance Concrete by 3D FIB/SEM — Implications for macroscopic fluid transport10.1016/j.cemconres.2018.08.004 ↗
19. Gas breakthrough pressure (GBP) through claystones: correlation with FIB/SEM imaging of the pore volume10.2516/ogst/2016001 ↗
20. Pore structure refinement of cement paste incorporating nanosilica: Study with dual beam scanning electron microscopy/focused ion beam (SEM/FIB)10.1016/j.matchar.2018.08.045 ↗
21. Fundamental transport property relations in porous media incorporating detailed pore structure description10.1007/s11242-016-0661-7 ↗
22. Prediction of rock electrical conductivity from mercury injection measurements10.1029/JB092iB01p00599 ↗
23. Quantitative prediction of permeability in porous rock10.1103/PhysRevB.34.8179 ↗
24. Estimating the permeability of cement pastes and mortars using image analysis and effective medium theory10.1016/j.cemconres.2011.11.018 ↗
25. New methods to measure liquid permeability in porous materials10.1016/j.cemconres.2006.09.020 ↗
26. Estimating transport properties of mortars using image analysis on backscattered electron images10.1016/j.cemconres.2006.05.002 ↗
27. Permeability, diffusivity, and microstructural parameters: a critical review10.1016/0008-8846(90)90101-3 ↗
28. Determination of relevant parameters influencing gas permeability of mortars10.1016/j.conbuildmat.2010.09.028 ↗
29. Transport properties of concrete after drying-wetting regimes to elucidate the effects of moisture content, hysteresis and microcracking10.1016/j.cemconres.2017.04.006 ↗
30. Effect of confining pressure and microcracks on mass transport properties of concrete10.1179/1743676114Y.0000000197 ↗
31. Simulating the effect of microcracks on the diffusivity and permeability of concrete using a three-dimensional model10.1016/j.commatsci.2016.03.047 ↗
32. Simulation of cement paste microstructure hydration, pore space characterization and permeability determination10.1007/BF02482142 ↗
33. Modelling of water permeability in cementitious materials10.1617/s11527-006-9138-4 ↗
34. Two-scale modeling of transport properties of cement paste: Formation factor, electrical conductivity and chloride diffusivity10.1016/j.commatsci.2015.08.048 ↗
35. A 3D lattice Boltzmann effective media study: understanding the role of C-S-H and water saturation on the permeability of cement paste10.1088/0965-0393/21/8/085016 ↗
36. Lattice Boltzmann model for incompressible flows through porous media10.1103/PhysRevE.66.036304 ↗
37. Pore-scale modelling of relative permeability of cementitious materials using X-ray computed microtomography images10.1016/j.cemconres.2017.02.005 ↗
38. The characterization and quantitative analysis of nanopores in unconventional gas reservoirs utilizing FESEM–FIB and image processing: An example from the lower Silurian Longmaxi Shale, upper Yangtze region, China10.1016/j.coal.2014.03.004 ↗
39. Understanding fluid transport through claystones from their 3D nanoscopic pore network10.1016/j.micromeso.2016.03.023 ↗
40. Multi-scale pore structure of COx claystone: Towards the prediction of fluid transport10.1016/j.marpetgeo.2015.04.004 ↗
41. Contradicting geometrical concepts in pore size analysis attained with electron microscopy and mercury intrusion10.1111/j.1551-2916.2008.02736.x ↗
42. 3D geometry and topology of pore pathways in Opalinus clay: Implications for mass transport10.1016/j.clay.2011.02.003 ↗
43. A stochastic approach for predicting tortuosity in porous media via pore network modeling10.1016/j.compgeo.2019.103406 ↗
44. Determination of the size of the representative volume element for random composites: statistical and numerical approach10.1016/S0020-7683(03)00143-4 ↗
45. Pore space relevant for gas permeability in Opalinus clay: Statistical analysis of homogeneity, percolation, and representative volume element10.1002/jgrb.50228 ↗
46. Evaluation of the Katz-Thompson model for estimating the water permeability of cement-based materials from mercury intrusion porosimetry data10.1016/0008-8846(94)90131-7 ↗
47. Hydrate failure in ITZ governs concrete strength: A micro-to-macro validated engineering mechanics model10.1016/j.cemconres.2017.10.002 ↗
48. Representative elementary volume (REV) of cementitious materials from three-dimensional pore structure analysis10.1016/j.cemconres.2017.09.012 ↗
49. Pore structure characterization of hardened cement paste by multi methods10.1155/2019/3726953 ↗
50. A Coupled nanoindentation/SEM-EDS study on low water/cement ratio Portland cement paste: evidence for C-S–H/Ca (OH) 2 nanocomposites10.1111/j.1551-2916.2009.03599.x ↗
51. Reconstruction and evaluation of the air permeability of a cement paste specimen with a void distribution gradient using CT images and numerical methods10.1016/j.conbuildmat.2015.03.103 ↗
52. Numerical simulation of the effect of cement particle shapes on capillary pore structures in hardened cement pastes10.1016/j.conbuildmat.2018.04.039 ↗
53. Gas permeability and electrical conductivity of structural concretes: Impact of pore structure and pore saturation10.1016/j.cemconres.2016.08.009 ↗
54. Computed permeability for cement paste subject to freeze-thaw cycles at early ages10.1016/j.conbuildmat.2020.118298 ↗
55. Why permeability to water is anomalously lower than that to many other fluids for cement-based material?10.1016/j.cemconres.2017.08.002 ↗
56. CT-CFD integrated investigation into porosity and permeability of neat early-age well cement at downhole condition10.1016/j.conbuildmat.2019.02.004 ↗
57. Lattice Boltzmann simulations of the permeability and capillary adsorption of cement model microstructures10.1016/j.cemconres.2012.09.003 ↗
58. Quantitative characterization of pore morphology in hardened cement paste via SEM-BSE image analysis10.1016/j.conbuildmat.2019.01.055 ↗
59. Effect of fly ash on the pore structure of cement paste under a curing period of 3 years10.1016/j.conbuildmat.2017.03.182 ↗
60. Comparison of methods for arresting hydration of cement10.1016/j.cemconres.2011.06.003 ↗
61. Influence of mix proportions on microstructure and gas permeability of cement pastes and mortars10.1016/j.cemconres.2011.11.019 ↗
62. Experimental study of gas and liquid permeability of a mortar10.1016/S0008-8846(02)00793-7 ↗
63. Relationship between pore structure and permeability of hardened cement mortars: on the choice of effective pore structure parameter10.1016/S0008-8846(97)00111-7 ↗