Strength characteristics and microstructure of hooked-end steel fiber reinforced concrete containing fly ash, bottom ash and their combination
Source abstract
Abstract
Abstract The paper presents the effect of fly ash (FA), bottom ash (BA), and their combination on the age-dependent strength characteristics and microstructure of hooked-end steel fiber reinforced concrete (SFRC). High volumes of FA and BA (25% and 50%) were used as partial replacement of cement and fine aggregate, respectively. The fiber volume fractions of 0.5% and 1.5% were used. The compressive and splitting tensile strength of concrete was determined up to 90 days. It is found that the utilization of BA and FA slows down the strength gain but attains strength comparable with plain concrete at later ages, either with or without steel fibers. The increase in strength of fiber reinforced concrete due to the increase in the percentage of steel fibers is affected by the shape of the test specimen with the cylinders giving more enhancement than the cubes. The experimental results are validated with the microstructure analysis by using scanning electron microscopy. Semi-empirical mathematical models are developed for predicting the age-dependent compressive and splitting tensile strength of SFRC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Sustainability of concrete construction10.1061/(ASCE)1084-0680(2008)13:2(98) ↗
2. Mehta · 2015
3. Mechanical and durability performance of concrete incorporating fine recycled concrete and glass aggregates10.1617/s11527-014-0342-3 ↗
4. On blended cement and geopolymer concretes containing palm oil fuel ash10.1016/j.matdes.2015.09.140 ↗
5. A brief on high-volume Class F fly ash as cement replacement–a guide for civil engineer10.1016/j.ijsbe.2015.10.002 ↗
6. Analysis of compressive strength development of concrete containing high volume fly ash10.1016/j.conbuildmat.2015.08.099 ↗
7. Analysis of compressive strength development and carbonation depth of high-volume fly ash cement pastes
8. Mechanical and time-dependent properties of high-volume fly ash concrete for structural use10.1680/jmacr.15.00384 ↗
9. Performance of sustainable concretes containing very high volume Class-F fly ash and ground granulated blast furnace slag10.1016/j.jclepro.2017.06.087 ↗
10. Pozzolanic properties of pulverized coal combustion bottom ash10.1016/S0008-8846(99)00098-8 ↗
11. Strength and drying shrinkage properties of concrete containing furnace bottom ash as fine aggregate10.1016/j.conbuildmat.2005.02.021 ↗
12. Evaluation of concrete incorporating bottom ash as a natural aggregates replacement10.1016/j.wasman.2006.07.020 ↗
13. Effect of bottom ash as replacement of fine aggregates in concrete
14. Influence of coal bottom ash as fine aggregate on fresh properties of concrete10.1016/j.conbuildmat.2008.05.003 ↗
15. I.M. Milagre Martins, A. Goncalves, J.C. Marques, Durability and strength properties of concrete containing coal bottom ash, in: Proceedings pro077: International RILEM Conference on Material Science-AdIPoC-Additions Improving Properties of Concrete-Theme 3 2010 (pp. 275-283). RILEM Publications SARL. http://www.rilem.org/gene/main.php?base=05&id_publ.
16. Use of power plant bottom ash as fine and coarse aggregates in high-strength concrete10.1016/j.conbuildmat.2010.06.065 ↗
17. Effect of coal bottom ash as partial replacement of sand on properties of concrete10.1016/j.resconrec.2012.12.006 ↗
18. Strength performance of concrete using bottom ash as fine aggregate
19. Uses of bottom ash in the replacement of fine aggregate for making concrete
20. Microstructure and properties of concrete using bottom ash and waste foundry sand as partial replacement of fine aggregates10.1016/j.conbuildmat.2013.12.051 ↗
21. Compressive strength, drying shrinkage and chemical resistance of concrete incorporating coal bottom ash as partial or total replacement of sand10.1016/j.conbuildmat.2014.06.034 ↗
22. Strength properties and micro-structural properties of concrete containing coal bottom ash as partial replacement of fine aggregate10.1016/j.conbuildmat.2013.09.026 ↗
23. Properties of concrete containing high volumes of coal bottom ash as fine aggregate10.1016/j.jclepro.2014.12.026 ↗
24. Durability and microstructure characteristics of alkali activated coal bottom ash geopolymer cement10.1016/j.jclepro.2014.06.037 ↗
25. Study the effect of coal BA as partial replacement of fine aggregate with sugarcane molasses as an admixture
26. Mechanical properties of high strength flowing concrete with hybrid fibers10.1016/j.conbuildmat.2011.08.057 ↗
27. Response of hybrid-fiber reinforced concrete slabs to hard projectile impact10.1016/j.ijimpeng.2013.02.005 ↗
28. Effect of crimped and hooked end steel fibers on the impact resistance of concrete
29. Mechanical properties of hybrid fibre-reinforced concrete–analytical modelling and experimental behaviour10.1680/jmacr.15.00276 ↗
30. Effectiveness of hybrid-fibers in improving the impact resistance of RC slabs10.1016/j.ijimpeng.2015.03.010 ↗
31. Flexural response of steel-fiber-reinforced concrete beams: effects of strength, fiber content, and strain-rate10.1016/j.cemconcomp.2015.10.001 ↗
32. Analytical and experimental investigations on the fracture behavior of hybrid fiber reinforced concrete10.1016/j.cemconcomp.2016.10.002 ↗
33. Experimental investigation on mechanical properties of hybrid fiber in M25 grade concrete
34. Experimental study on comparison of hooked end and crimped steel fiber
35. IS 4031, Methods for physical tests for hydraulic cement (Part-1 to 13). Bureau of Indian Standards, New Delhi, India, 1999. https://law.resource.org/pub/in/bis/S03/is.4031.1.15.1999.pdf.
36. IS 8112, 43 Grade ordinary Portland cement- Specifications. Bureau of Indian Standards, New Delhi, India, 1989. https://law.resource.org/pub/in/bis/S03/is.8112.1989.pdf.
37. IS 3812, Specification for fly ash for use as pozzolana and admixture. Bureau of Indian Standards, New Delhi, India, 1999. https://law.resource.org/pub/in/bis/S03/is.3812.1999.pdf.
38. IS 383, Specification for coarse and fine aggregates from natural sources for concrete. Bureau of Indian Standards, New Delhi, India, 1970. https://law.resource.org/pub/in/bis/S03/is.383.1970.pdf.
39. IS 456, Plain and reinforced concrete – code of practice. Bureau of Indian Standards, New Delhi, India, 2000. https://law.resource.org/pub/in/bis/S03/is.456.2000.pdf.
40. IS 10262, Concrete mix proportioning – guidelines. IS 10262), Bureau of Indian Standards, New Delhi, India, 2009. https://law.resource.org/pub/in/bis/S03/is.10262.2009.pdf.
41. IS 516, Methods of tests for strength of concrete. Bureau of Indian Standards, New Delhi, India, 1959. https://law.resource.org/pub/in/bis/S03/is.516.1959.pdf.
42. IS 5816, Splitting tensile strength of concrete method of test, Bureau of Indian Standards, New Delhi, India, 1970. https://law.resource.org/pub/in/bis/S03/is.5816.1970.pdf.
43. A new chemical method for analyzing free calcium hydroxide content in cementing material10.1016/j.cemconres.2003.12.003 ↗
44. Discussion: Mechanical properties of hybrid fibre-reinforced concrete – analytical modelling and experimental behavior10.1680/jmacr.16.00243 ↗
45. Effect of GGBFS on age dependent static modulus of elasticity of concrete10.1016/j.conbuildmat.2012.12.035 ↗