New epoxy anchor for better bonding between FRP sheets and concrete
Source abstract
Abstract
Abstract This study carried out an experimental investigation on the effectiveness of newly proposed epoxy anchors on the interfacial bond performance between basalt fibre reinforced polymer (BFRP) sheets and concrete. The parameters examined included the size of epoxy anchors and the number and spacing of anchors. It is concluded that the proposed epoxy anchors remarkably enhanced the shear resistance while the progressive FRP debonding was significantly postponed. The experimental results showed an average 77.49% increment in the bond strength, 86.71% increment in the utilization of BFRP sheets, and 78.10% increase in the peak shear stress. A bond strength model by incorporating the effects of strain energy and bonding area of epoxy resin was proposed to analyse the effect of anchorage. The predicted debonding load showed good agreement with the testing data.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Experimental study of flexural behaviour of Rc beams strengthened by longitudinal and U-Shaped basalt Frp sheet10.1016/j.compositesb.2017.09.053 ↗
2. Plasticity-based criterion for confinement design of Frp jacketed concrete columns10.1617/s11527-015-0632-4 ↗
3. Bond behavior between basalt fibres reinforced polymer sheets and steel fibres reinforced concrete10.1016/j.engstruct.2018.09.052 ↗
4. Effect of aggregate size on the dynamic interfacial bond behaviour between basalt fiber reinforced polymer sheets and concrete10.1016/j.conbuildmat.2019.07.310 ↗
5. Adequately Frp confined reinforced concrete columns under axial compressive monotonic or cyclic loading10.1617/s11527-011-9810-1 ↗
6. Epoxy interlocking: a novel approach to enhance Frp-to-concrete bond behavior10.1016/j.conbuildmat.2018.10.183 ↗
7. Environmental durability of externally bonded Frp materials intended for repair of concrete structures10.1016/j.conbuildmat.2010.11.096 ↗
8. Strain rate effect on interfacial bond behaviour between Bfrp sheets and steel fibre reinforced concrete
9. Bond behaviour between hybrid fiber reinforced polymer sheets and concrete10.1016/j.conbuildmat.2019.03.082 ↗
10. Anchorage strength models for Frp and steel plates bonded to concrete10.1061/(ASCE)0733-9445(2001)127:7(784) ↗
11. Frp-strengthened Rc beams. I: review of debonding strength models10.1016/S0141-0296(01)00105-5 ↗
12. Fib. Externally Applied Frp Reinforcement for Concrete Structures. No. 90. International federation for structural concrete, Lausanne, Switzerland (2019).
13. Review of anchorage systems for externally bonded Frp laminates10.1007/s40069-013-0029-0 ↗
14. Frp/stirrups interaction of shear-strengthened beams10.1617/s11527-016-0973-7 ↗
15. Influence of plate length and anchor position on Frp-to-concrete joints anchored with Frp anchors10.1016/j.compstruct.2016.09.086 ↗
16. Tensile behavior of Frp anchors in concrete10.1061/(ASCE)1090-0268(2009)13:2(82) ↗
17. Modelling of Frp-concrete bonded interfaces containing Frp anchors10.1016/j.conbuildmat.2017.02.080 ↗
18. Anchorage devices used to improve the performance of reinforced concrete beams retrofitted with Frp composites: state-of-the-art review10.1061/(ASCE)CC.1943-5614.0000276 ↗
19. Concrete cover separation in Frp-plated Rc beams: mitigation using Frp U-jackets10.1061/(ASCE)CC.1943-5614.0000721 ↗
20. Hybrid bonding of Frp to reinforced concrete structures10.1061/(ASCE)1090-0268(2008)12:3(266) ↗
21. Mechanical and bond properties of Frp anchor spikes in concrete and masonry blocks10.1016/j.compstruct.2017.02.026 ↗
22. Bond-test protocol for plate-to-concrete interface involving all mechanisms10.1061/(ASCE)CC.1943-5614.0000581 ↗
23. Structural behavior of composite Rc beams with externally bonded Cfrp10.1061/(ASCE)1090-0268(1998)2:3(132) ↗
24. Impacts of configurations on the strength of Frp anchors10.1016/j.compstruct.2018.04.020 ↗
25. Optimisation of carbon and glass Frp anchor design10.1016/j.conbuildmat.2010.11.100 ↗
26. Cyclic tests on seismically damaged reinforced concrete walls strengthened using fiber-reinforced polymer reinforcement
27. The effect of surface preparation on the bond interface between Frp sheets and concrete members10.1016/S0263-8223(01)00057-5 ↗
28. Effects of surface preparation method on Frp-concrete bond strength under alkaline conditions10.1061/(ASCE)CC.1943-5614.0000786 ↗
29. Influence of surface roughness on the bond of Frp laminates to concrete10.1016/j.conbuildmat.2012.09.112 ↗
30. Effect of groove characteristics on Cfrp-to-concrete bond behavior of Ebrog joints: experimental study using particle image velocimetry (Piv)10.1016/j.conbuildmat.2013.08.036 ↗
31. Experimental investigation into bond behavior of Cfrp sheets attached to concrete using Ebr and Ebrog techniques10.1016/j.compositesb.2013.03.003 ↗
32. Near-surface mounted Frp reinforcement: an emerging technique for strengthening structures10.1016/j.compositesb.2006.08.003 ↗
33. Bond-slip model for Cfrp strips near-surface mounted to concrete10.1016/j.engstruct.2013.05.032 ↗
34. End cover separation in Rc beams strengthened in flexure with bonded Frp reinforcement: simplified finite element approach10.1617/s11527-015-0645-z ↗
35. Fib. Externally Applied Frp Reinforcement for Concrete Structures. No. 90. International federation for structural concrete, Lausanne, Switzerland (2019).
36. Externally bonded reinforcement in grooves (Ebrig) technique to postpone debonding of Frp sheets in strengthened concrete beams10.1016/j.conbuildmat.2012.09.030 ↗
37. Investigating the effects of concrete compressive strength, Cfrp thickness and groove depth on Cfrp-concrete bond strength of ebrog joints10.1016/j.conbuildmat.2018.08.203 ↗
38. Influence of Frp anchors on the strength and ductility of Frp-strengthened Rc slabs10.1016/j.conbuildmat.2013.02.006 ↗
39. Behavior of fiber-reinforced polymer-strengthened reinforced concrete beams under static and impact loads10.1177/2041419616658730 ↗
40. Front and side view image correlation measurements on Frp to concrete pull-off bond tests10.1061/(ASCE)CC.1943-5614.0000106 ↗
41. Experimental evaluation of Cfrp-concrete bond behavior under high loading rates using particle image velocimetry method10.1061/(ASCE)CC.1943-5614.0000933 ↗
42. Effect of aggregate size on bond behaviour between basalt fibre reinforced polymer sheets and concrete10.1016/j.compositesb.2018.09.089 ↗
43. Experimental study on bond behavior between concrete and Frp reinforcement10.1061/(ASCE)1090-0268(2008)12:2(180) ↗
44. Quantification of bond-slip relationship for externally bonded Frp-to-concrete joints10.1061/(ASCE)CC.1943-5614.0000375 ↗
45. Development of the nonlinear bond stress-slip model of fiber reinforced plastics sheet-concrete interfaces with a simple method10.1061/(ASCE)1090-0268(2005)9:1(52) ↗
46. Analytical solution for the bond strength of externally bonded reinforcement10.1016/j.compstruct.2012.04.026 ↗
47. Analytical modeling of the bond-slip relationship at Frp-concrete interfaces for adhesively-bonded joints10.1016/j.compositesb.2010.06.004 ↗
48. Modelling Frp-to-substrate joints using the bilinear bond-slip rule with allowance for friction—full-range analytical solutions for long and short bonded lengths10.1016/j.ijsolstr.2017.11.024 ↗
49. Shear capacity of Frp-strengthened Rc beams: Frp debonding10.1016/S0950-0618(02)00091-0 ↗
50. Width effect of interfacial bond characteristics10.1016/j.conbuildmat.2019.06.106 ↗