journal article·2020-09

Evaluation of the shrinkage and fracture properties of hybrid Fiber-Reinforced SAP modified concrete

Juntao Fan, Aiqin Shen, Yinchuan Guo, Ming Zhao, Xiaolong Yang, Xuhui Wang

Publisher page

Abstract

Abstract This study investigated the shrinkage and fracture properties of superabsorbent polymers (SAP)-modified concrete with and without hybrid fibers. For this purpose, uniaxial compressive, four-point bending, three-point bending, dry shrinkage and plastic cracking tests were carried out on specimens produced using hybrid fiber and SAP. In addition, microstructural analysis was performed using scanning electron microscopy (SEM) to reveal the underlying mechanisms increasing the toughness and cracking resistance of the hybrid fiber-reinforced SAP modified concrete. The results showed that the addition of the hybrid fiber compensated for the strength loss caused by the SAP and effectively increased the strength of the concrete. In addition, the fracture process of the hybrid fiber -reinforced SAP modified concrete exhibited a better toughness than that of SAP modified concrete. Compared with that of SAP modified concrete, the fracture energy was increased by 105.95%, and the total cracking area per unit area was reduced by 73.7%. The addition of both the hybrid fiber and SAP significantly reduced the shrinkage of the concrete, mainly by decreasing the shrinkage rate of the concrete and accelerating the time required for the concrete shrinkage to stabilize. In light of the SEM images, it was suggested that the SAP transported a portion of free water into the concrete and promoted the hydration reaction. The hybrid fiber improved the internal pore structure of the concrete and acted as a reinforcement in the concrete. In general, the SAP and hybrid fiber worked together to increase the toughness and cracking resistance of the concrete.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Properties and Behavior · Innovative concrete reinforcement materials · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Damage analysis and cracking model of reinforced concrete structures with rebar corrosion10.1016/j.corsci.2011.06.018 ↗
2. A practical method to estimate crack openings in concrete structures10.1002/nag.876 ↗
3. S. Al-Hubboubi, T. al-Attar, H. Al-Badry, S. Abood, R. Mohammed, B. Haddhood. Performance of super-absorbent polymer as an internal curing agent for self-compacting concrete. In: AlAttar TS, Al-Neami MA, AbdulSahib WS, editors. 3rd International Conference on Buildings, Construction and Environmental Engineering, Bcee3-20172018.
4. Relation between the molecular structure and the efficiency of superabsorbent polymers (SAP) as concrete admixture to mitigate autogenous shrinkage10.1016/j.cemconres.2012.03.011 ↗
5. Effect of partially hydrated cementitious materials and superabsorbent polymer on early-age shrinkage of UHPC10.1016/j.conbuildmat.2012.12.008 ↗
6. Combined effect of shrinkage reducing admixtures (SRA) and superabsorbent polymers (SAP) on the autogenous shrinkage, hydration and properties of cementitious materials10.1016/j.conbuildmat.2016.12.206 ↗
7. Water-entrained cement-based materials: II. Experimental observations☆10.1016/S0008-8846(02)00737-8 ↗
8. Superabsorbent polymers: On their interaction with water and pore fluid10.1016/j.cemconcomp.2011.04.006 ↗
9. Super absorbing polymers as an internal curing agent for mitigation of early-age cracking of high-performance concrete bridge decks10.1016/j.conbuildmat.2010.06.063 ↗
10. Effect of Superabsorbent Polymers on Workability and Hydration Process in Fly Ash Cementitious Composites10.1061/(ASCE)MT.1943-5533.0001122 ↗
11. Effect of superabsorbent polymer on the shrinkage and crack resistance of concrete at early age10.1007/s13726-018-0615-8 ↗
12. Effect of internal curing by superabsorbent polymers - Internal relative humidity and autogenous shrinkage of alkali-activated slag mortars10.1016/j.conbuildmat.2016.07.007 ↗
13. Tensile creep and shrinkage of SAP modified concrete10.1016/j.cemconres.2014.01.014 ↗
14. Use of macro plastic fibres in concrete: A review10.1016/j.conbuildmat.2015.05.105 ↗
15. High-performance fiber-reinforced concrete: a review10.1007/s10853-016-9917-4 ↗
16. Lightweight aggregate concrete fiber reinforcement - A review10.1016/j.conbuildmat.2012.07.071 ↗
17. Influence of jute fiber on concrete properties10.1016/j.conbuildmat.2018.09.048 ↗
18. Experimental investigation of the performance of concrete columns strengthened with fiber reinforced concrete jacket10.1016/j.conbuildmat.2018.10.236 ↗
19. Mechanical properties of fibre reinforced concrete with recycled fibres10.1016/j.conbuildmat.2018.11.183 ↗
20. Mechanical properties and fracture behavior of basalt and glass fiber reinforced concrete: An experimental study10.1016/j.conbuildmat.2015.10.006 ↗
21. Fibre reinforced concrete with a combination of polyolefin and steel-hooked fibres10.1016/j.compstruct.2017.03.033 ↗
22. Effects of polypropylene twisted bundle fibers on the mechanical properties of high-strength oil palm shell lightweight concrete10.1617/s11527-015-0572-z ↗
23. Shear strength of reinforced concrete beams with a fiber concrete matrix10.1139/l05-118 ↗
24. Souradeep Gupta, Harn Wei Kua, Pang. Combination of polypropylene fibre and superabsorbent polymer to improve physical properties of cement mortar. Magazine of Concrete Research. 70 (7) (2018) 350-364.10.1680/jmacr.17.00193 ↗
25. Wil V. Srubar, III. Biochar-immobilized bacteria and superabsorbent polymers enable self-healing of fiber-reinforced concrete after multiple damage cycles10.1016/j.cemconcomp.2019.03.017 ↗
26. ASTM C 1017/C 1017M-2003. Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete. ASTM International, West Conshohocken, PA,2003.
27. E30-2005 JTG. Test Methods of Cement and Concrete for Highway Engineering, Ministry of Transport, Beijing, 2005 (in Chinese).
28. Can superabsorent polymers mitigate autogenous shrinkage of internally cured concrete without compromising the strength?10.1016/j.conbuildmat.2011.12.062 ↗
29. Factors Influencing Strength of Super Absorbent Polymer (SAP) Concrete10.1007/s12209-017-0049-y ↗
30. Dezhi Wang, Yinyan Zhang, Yunfang, Meng. Study on Adding Super Absorbent Polymer to Improve the Frost Resistance of Concrete. Applied Mechanics and Materials. 584-586(2014) 960-963.10.4028/www.scientific.net/AMM.584-586.960 ↗
31. Craeye Bart, Geirnaert Matthew, Schutter Geert De. Super absorbing polymers as an internal curing agent for mitigation of early-age cracking of high-performance concrete bridge decks. Construction and Building Materials. 25(2011) 1-13.10.1016/j.conbuildmat.2010.06.063 ↗
32. Influence of hybrid fibres on strength and stress-strain behaviour of concrete under uni-axial stresses10.1016/j.conbuildmat.2019.02.113 ↗
33. Kong Xiangqing, HE Wenchang, Xing Lili, Wang Xuezhi. Effect of steel-polypropylene hybrid fiber on the impact resistance of recycled aggregate concrete. Acta Materiae Compositae Sinica. (2019) 1-13.
34. lihua. Shear behavior of hybrid fiber reinforced high performance concrete deep beams. China Civil
35. Effects of basalt and glass chopped fibers addition on fracture energy and mechanical properties of ordinary concrete: CMOD measurement10.1016/j.conbuildmat.2016.03.176 ↗
36. Effect of Fibers Length and Fibers Content on the Splitting Tensile Strength of Coconut Fibers Reinforced Concrete Composites10.4028/www.scientific.net/KEM.748.311 ↗
37. J. Wang, Y. Li, M.-z. Zhang. Shrinkage Performance and Cracking Resistance Mechanism of Rubberized Lightweight Aggregate Concrete with Polymer. In: Lee HS, Yoon IS, Aliabadi MH, editors. Advances in Fracture and Damage Mechanics Vii2008. p. 817-820.10.4028/www.scientific.net/KEM.385-387.817 ↗
38. Shrinkage mechanisms, crack formation and service life of reinforced concrete structures10.1504/IJSTRUCTE.2009.030023 ↗
39. Research on shrinkage development and fracture properties of internal curing pavement concrete based on humidity compensation10.1016/j.conbuildmat.2019.01.115 ↗
40. Wang Y, Niu D T, Miao Y Y. Influence of steel fibre on micropore structure of concrete. Materials Research Innovations. 19 (suppl.5) (2015) S5.1135-S5.1139.10.1179/1432891714Z.0000000001264 ↗
41. Experiment Study on the Frost Resistance of Steel Fiber Reinforced Concrete on the Microstructure10.4028/www.scientific.net/AMR.368-373.357 ↗