Assessment of the effect of natural hydraulic lime on the stabilisation of compressed earth blocks
Source abstract
Abstract
Abstract Earthen construction is an alternative construction method that allows for the reduction of the embodied energy of building materials and the promotion of sustainability in the construction sector. Among the different earthen building techniques available, compressed earth blocks offer a remarkable potential for industrialisation. Due to the drawbacks associated with the use of non-stabilised blocks, such as the impact of weathering, previous researches had addressed the development of compatible stabilisers for performance improvement. Lime is a traditional binder whose properties are compatible with earth, especially when fine particles are present. Yet, there is limited research on the use of natural hydraulic lime, as most previous studies have focused on the use of hydrated lime, which requires an extended curing time. In the present study, two types of natural hydraulic limes (NHL2 and NHL3.5), in ratios ranging from 3% to 12%, were investigated for the stabilisation of compressed earth blocks. The results revealed that the replacement of soil with lime led to a reduction of the bulk density of the samples of up to 12.8% while increasing their mechanical strength by 48–56% and 12–35% in NHL2 and NHL3.5 respectively. Furthermore, the type of lime has a clear influence on the pore size and volume, and consequently, on both the capillary absorption and the absorption under atmospheric pressure. The results suggested that the addition of NHL2 induced an increase in pore size and volume, in line with the behaviour exhibited by hydrated lime, while the opposite took place when NHL3.5 was used.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hygrothermal properties of building materials · Building materials and conservation · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. Rocha · 2015
2. Affordable construction towards sustainable buildings: review on embodied energy in building materials
3. Earth construction: Lesson from the past for future eco-efficient construction10.1016/j.conbuildmat.2011.10.054 ↗
4. Towards sustainable bricks production: an overview
5. Effect of stabilisation on mechanical properties, moisture buffering and water durability of hypercompacted earth10.1016/j.conbuildmat.2017.05.182 ↗
6. Building houses with local materials: means to drastically reduce the environmental impact of construction10.1016/S0360-1323(00)00054-8 ↗
7. The selection of soils for unstabilised earth building: a normative review10.1016/j.conbuildmat.2005.08.006 ↗
8. Strength and elasto-plastic properties of non-industrial building materials manufactured with clay as a natural binder10.1016/j.clay.2008.12.019 ↗
9. A comparative study of natural Tunisian clay types in the formulation of compacted earth blocks10.1016/j.jafrearsci.2019.103620 ↗
10. Dredged sediments valorisation in compressed earth blocks: suction and water content effect on their mechanical properties10.1016/j.conbuildmat.2017.10.043 ↗
11. Optimizing thermal and mechanical performance of compressed earth blocks (CEB)10.1016/j.conbuildmat.2015.12.024 ↗
12. Stabilization of compressed earth blocks (CEBs) by geopolymer binder based on local materials from Burkina Faso10.1016/j.conbuildmat.2018.01.051 ↗
13. Strength, durability and shrinkage characteristics of cement stabilised soil blocks10.1016/0958-9465(95)00019-9 ↗
14. Compressive strength testing of compressed earth blocks10.1016/j.conbuildmat.2005.08.021 ↗
15. The influence of natural reinforcement fibers, gypsum and cement on compressive strength of earth bricks materials10.1016/j.conbuildmat.2015.12.031 ↗
16. Combined effect of mineralogy and granular texture on the technico-economic optimum of the adobe and compressed earth blocks
17. A comprehensive study of mechanical properties of compressed earth blocks10.1016/j.conbuildmat.2018.05.077 ↗
18. Tensile bond strength of soil-cement block masonry couplets using cement-soil mortars10.1061/(ASCE)0899-1561(2006)18:1(36) ↗
19. Effect of mix design on compressed earth block strength10.1016/j.conbuildmat.2017.10.005 ↗
20. Role of lime with cement in long terms strength of compressed stabilized earth blocks10.1016/j.ijsbe.2014.03.001 ↗
21. Influence of compaction pressure on the mechanical and acoustic properties of compacted earth blocks: an inverse multiparameter acoustic problem10.1016/j.apacoust.2017.04.017 ↗
22. Performance of compacted cement-stabilised soil10.1016/j.cemconcomp.2004.01.003 ↗
23. Test of resistance to compression of soil-cement blocks10.3989/ic.10.048 ↗
24. Towards sustainable bricks production: an overview10.1016/j.conbuildmat.2018.01.038 ↗
25. Utilization of granulated blast furnace slag and cement in the manufacture of compressed stabilized earth blocks10.1016/j.conbuildmat.2018.01.125 ↗
26. Engineering properties of unfired clay masonry bricks10.1016/j.enggeo.2009.05.002 ↗
27. Stabilised unfired clay bricks for environmental and sustainable use10.1016/j.clay.2012.01.011 ↗
28. Strength and environmental evaluation of stabilised Clay-PFA eco-friendly bricks10.1016/j.conbuildmat.2016.08.114 ↗
29. Potential use of stockpiled circulating fluidized bed combustion ashes in manufacturing compressed earth bricks10.1016/j.conbuildmat.2008.08.025 ↗
30. Effect of the additon of coal-ash and cassava peels on the engineering properties of compressed earth blocks10.1016/j.conbuildmat.2012.04.056 ↗
31. Stabilised compressed earth bricks made with coastal solonchak10.1016/j.conbuildmat.2014.12.069 ↗
32. Lime stabilisation of clay soils10.1007/BF02592537 ↗
33. Durability of lime stabilized earth blocks
34. Possibility of lime as a stabilizer in Compressed Earth Brick (CEB)10.18517/ijaseit.1.6.117 ↗
35. The use of stabilised Spanish clay soil for sustainable construction materials10.1016/j.enggeo.2012.02.010 ↗
36. Long-term stability characteristics of a lime-treated plastic soil10.1061/(ASCE)0899-1561(2007)19:4(358) ↗
37. Effects of lime treatments on marls10.1016/j.clay.2016.10.047 ↗
38. Microstructure and physical properties of lime-clayey adobe bricks10.1016/j.conbuildmat.2007.09.002 ↗
39. The suitability and lime stabilization requirement of some lateritic soil samples as pavemen
40. The mechanical and physical properties of compressed earth block stabilised with lime and filled with untreated and alkali-treated date palm fibers10.1016/j.conbuildmat.2015.12.007 ↗
41. Engineering characteristics of the compressed-stabilized earth brick10.1016/j.conbuildmat.2011.04.061 ↗
42. Chemico-microstructural changes in earthen building materials containing calcium carbide residue and rice husk ash10.1016/j.conbuildmat.2019.05.037 ↗
43. Durability of rammed earth walls exposed for 20 years to natural weathering10.1016/j.buildenv.2008.07.001 ↗
44. Assessment of the mechanical performance of three varieties of pine needles as natural reinforcement of adobe10.1016/j.conbuildmat.2018.07.187 ↗
45. UNE 103-101 (1995). Particle size analysis of a soil by screening. AENOR.
46. UNE 103-103 (1994). Determination of the liquid limit of a soil by the Casagrande apparatus method. AENOR.
47. UNE 103-104 (1993). Test for plastic limit of a soil. AENOR.
48. UNE 41410 (2008). Compressed earth blocs for walls and partitions. Definitions, specifications and test methods. AENOR.
49. F.H. Chung, Quantitative interpretation of X-ray diffraction patterns. III. Simultaneous determination of a set of reference intensities, J. Appl. Crystallogr. 8 (1) (1975) 17–19.10.1107/S0021889875009454 ↗
50. UNE EN 1097-5 (2009). Tests for mechanical and physical properties of aggregates – Part 5: Determination of water content by drying in a ventilated oven. AENOR.
51. UNE EN 459-2 (2011). Building lime – Part 2: Test methods. AENOR.
52. Saint Astier · 2019
53. UNE EN 772-13 (2001). Methods of test for masonry units. Part 13: Determination of net and gross dry density of masonry units (except for natural stone). AENOR.
54. UNE 102-039 (1985). Gypsum and plasters for building construction. Determination of Shore C and the Brinell Hardness. AENOR.
55. LNEC (2015). Ficha de ensaio. Revestimetnos de paredes. Ensaio de avaliação de características mecánicas por ultrassons. In: Veiga, M.R.
56. Santos, D.A. (2016). Métodos de ensaio de revestimentos de paredes existentes. Ensaios in situ e ensayos em laboratorio. Lisboa: LNEC.
57. Bowles · 1996
58. UNE EN 1015-11 (2000). Methods of test for mortar for masonry. Part 11: Determination of flexural and compressive strength of hardened mortar. AENOR.
59. UNE EN 1015-11/A1 (2007). Methods of test for mortar for masonry. Part 11: Determination of flexural and compressive strength of hardened mortar. AENOR.
60. UNE EN 772-11 (2001). Methods of test for masonry units. Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units. AENOR.
61. UNE EN 16302 (2016). Conservation of cultural heritage. Test methods: Measurement of water absorption by pipe method. AENOR.
62. Earthen construction in the 21st century10.3989/ic.10.046 ↗
63. Delay in compaction and importance of the lime fixation point on the strength and compaction characteristics of soil
64. The influence of lime on the compaction behaviour of soils10.1680/envgeo.14.00015 ↗
65. F. Arredondo y Verdú, F. Giménez Martín, J.A. Jiménez Salas, O. Llamazares Gómez, G. de Navacerrada Farias, M. Sendín y P. Villamil, (1977). Terraplenes y pedraplenes. Teoría y práctica. Barcelona: Editores Técnicos Asociados S.A.
66. B. Sainsbury, N. Kurucuk, Consideration of proneness of rocks to strain-bursting through an assessment of elastic parameters. In: Fontoura, Rocca and Pavón Mendoza, eds. Rocks Mechanics for Natural Resources and Infrastructure Development, 2020, 737–743. ISBN: 978-0-367-42284-4.
67. Competition between hydration and carbonation in hydraulic lime and lime-pozzolana mortars10.4028/www.scientific.net/AMR.133-134.241 ↗
68. Compression behaviour of non-industrial materials in civil engineering by three scale experiments: the case of rammed earth10.1617/s11527-008-9446-y ↗
69. Experimental determination of the fracture properties of unfired dry earth10.1016/j.engfracmech.2012.03.005 ↗
70. Improved correlation between the static and dynamic elastic modulus of different types of rocks10.1617/s11527-015-0702-7 ↗
71. Static and dynamic Young’s moduli of chalk from the North Sea10.1190/1.2821819 ↗
72. Effects of testing methods and conditions on the elastic properties of limestone rock10.1016/j.enggeo.2004.03.007 ↗
73. Y. Guéguen, V. Palciauskas, Introduction to the physics of rocks,. New Jersey: Press PU editor, 1994, ISBN: 978-0-691-03452-2.
74. V. Cuéllar, J.L. García, J.L. Monte, J. Valerio, Mechanical behaviour of a big rockfill highway embankment. Comportement mécanique d’un grand remblai d’enrochement d’autoroute. In: Narends et al eds. Geotechnical Engineering for Transportation Infraestructure, 1999, 97–102. ISBN: 90-5809-047-7.
75. XP P13-901 (2001). Compressed earth blocks of walls and partitions: definitions- specification- test methods – delivery acceptance conditions. AFNOR.
76. NTC5324 (2004). Bloques de suelo cemento para muros y divisones. Dfiniciones. Especificaciones. Métodos de ensayo. Condiciones de entrega. ICONTEC.