journal article·2020-12Open access

Impact of laboratory mixing procedure on the properties of reclaimed asphalt pavement mixtures

Mukul Rathore, Martins Zaumanis

Abstract

Reclaimed asphalt (RA) mixtures have been extensively studied over the last decade, but there is no common procedure for producing high RA mixtures in the laboratory. This study evaluates the effect of asphalt mixing parameters, including rejuvenator incorporation method, mixing temperature, mixing time, and mixer equipment on properties of high RA content mixtures. The asphalt mixtures containing 60% RA material were evaluated using the indirect tensile strength test and the stiffness modulus test. In parallel, a stage extraction method was developed to obtain four layers of bitumen from loose mixtures and then further analyzing them using the dynamic shear rheometer and the Fourier transform infrared spectroscopy. The results identified mixing and heating temperature as an important parameter that must be carefully controlled to avoid excessive aging of the binder. It was also found that laboratory mixer equipment could affect the degree of blending and hence should be taken into account for comparing mixtures. Based on this study, a mixing procedure is recommended for producing high RA mixtures using the rejuvenator in the laboratory.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Kandhal · 1997
2. Performance of warm mix recycled asphalt containing up to 100% RAP10.1016/j.conbuildmat.2016.02.108 ↗
3. Performance-based design of 100% recycled hot-mix asphalt and validation using traffic load simulator10.1016/j.jclepro.2019.117679 ↗
4. Short-term performance appraisal of half-warm mix asphalt mixtures containing high (70%) and total RAP contents (100%): From laboratory mix design to its full-scale implementation10.1016/j.conbuildmat.2018.03.051 ↗
5. Towards 100% recycling of reclaimed asphalt in road surface courses: binder design methodology and case studies10.1016/j.jclepro.2016.05.093 ↗
6. National Academies of Sciences, Engineering, and Medicine · 2020
7. Measuring the binder film residues on black rock in mixtures with high amounts of reclaimed asphalt10.1016/j.jclepro.2017.02.055 ↗
8. Roberts · 1996
9. Experimental study of high modulus asphalt mixture containing reclaimed asphalt pavement10.1016/j.jclepro.2020.121447 ↗
10. Review of very high-content reclaimed asphalt use in plant-produced pavements: State of the art10.1080/10298436.2014.893331 ↗
11. Effect of rejuvenator types and mixing procedures on volumetric properties of asphalt mixtures with 50% RAP Constr10.1016/j.conbuildmat.2019.05.093 ↗
12. Effect of rejuvenator addition location in plant on mechanical and chemical properties of RAP binder
13. Determining optimum rejuvenator addition location in asphalt production plant10.1016/j.conbuildmat.2018.11.239 ↗
14. Evaluating the effect of rejuvenators on the degree of blending and performance of high RAP, RAS, and RAP/RAS mixtures10.1080/14680629.2013.812836 ↗
15. Recommended Use of Reclaimed Asphalt Pavement in the Superpave Mix Design Method: Technician’s Manual
16. Application of a high percentage of reclaimed asphalt pavement in an asphalt mixture: blending process and performance investigation Application of a high percentage of reclaimed asphalt pavement in an asphalt mixture: blending process and performance inv10.1080/14680629.2016.1182941 ↗
17. Effects of preheating conditions on performance and workability of hot in-place recycled asphalt mixtures10.1016/j.conbuildmat.2019.07.277 ↗
18. Evaluation of the diffusion and distribution of the rejuvenator for hot asphalt recycling10.1016/j.conbuildmat.2015.08.135 ↗
19. Effect of mixing time on reclaimed asphalt mixtures: An investigation by means of imaging techniques10.1016/j.conbuildmat.2015.09.009 ↗
20. Effects of mixing procedures and rap sizes on stiffness distribution of hot recycled asphalt mixtures10.1016/j.conbuildmat.2013.05.056 ↗
21. Evaluation of optimum mixing conditions for rubberized asphalt mixture containing reclaimed asphalt pavement10.1016/j.conbuildmat.2019.117426 ↗
22. Revised predictive model for dynamic (complex) modulus of asphalt mixtures10.1177/0361198196154000103 ↗
23. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids10.1021/ja01619a008 ↗
24. Rejuvenator diffusion in binder film for hot-mix recycled asphalt pavement
25. Investigation of Reclaimed Asphalt Pavement blending efficiency through GPC and FTIR10.1016/j.conbuildmat.2013.10.003 ↗
26. Modifier influence in the characterization of hot-mix recycled material
27. Laboratory investigation of mixing hot-mix asphalt with reclaimed asphalt pavement10.1177/0361198105192900105 ↗
28. Asphalt oxidation mechanisms and the role of oxidation products on age hardening revisited10.1080/14680629.2011.9713895 ↗
29. Compatibility of recycled binder blends with recycling agents: rheological and physicochemical evaluation of rejuvenation and aging processes10.1021/acs.iecr.7b01657 ↗
30. FTIR spectral analysis of bituminous binders : reproducibility and impact of ageing temperature10.1617/s11527-018-1170-7 ↗
31. Effect of rejuvenator and mixing methods on behaviour of warm mix asphalt containing high RAP content10.1016/j.conbuildmat.2018.11.205 ↗