Behavior of recycled steel fiber reinforced concrete under uniaxial cyclic compression and biaxial tests
Source abstract
Abstract
Abstract In this study, the behavior of recycled steel fiber reinforced concrete (RSFRC) is investigated through uniaxial cyclic compression and biaxial tests conducted on 56 cubic specimens with four admixtures of RSF-content. The results obtained from cyclic compression tests show that the presence of RSFs reduces the damage of specimens in the post-peak regime which leads to an increase of residual strength. Furthermore, the biaxial failure-stress envelopes constructed based on the biaxial testing results indicate that an increase in RSF-content expands the failure envelope. Consistently, maximum biaxial strength for all specimens is found to occur at a stress confinement ratio α = ~ 0.44 - 0.48 . Moreover, measurements show that the failure biaxial strain significantly increases with increasing the RSF-content. The biaxial test results are found in good agreement with the literature on steel fiber reinforced concretes (SFRCs) indicating that industrial steel fibers can be substituted by RSFs which are environment-friendly. Employing these results, a model for the biaxial behavior of RSFRCs is proposed which can be employed in the constitutive relations required for the modeling of RSFRCs as well as SFRCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. American-Concrete-Institute-(ACI)-Committee-544, Measurement of Properties of Fiber Reinforced Concrete, American Concrete Institute, 1999.
2. Mode I fracture toughness of fibre reinforced concrete10.1016/j.tafmec.2017.03.015 ↗
3. FEM investigation of SFRCs using a substepping integration of constitutive equations
4. Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete10.1016/j.conbuildmat.2015.11.028 ↗
5. Experimental investigation on the stress-strain behavior of steel fiber reinforced concrete subjected to uniaxial cyclic compression10.1016/j.conbuildmat.2017.02.094 ↗
6. Use of steel fibres recovered from waste tyres as reinforcement in concrete: pull-out behaviour, compressive and flexural strength10.1016/j.wasman.2008.12.002 ↗
7. An experimental study on the post-cracking behaviour of Hybrid Industrial/Recycled Steel Fibre-Reinforced Concrete10.1016/j.conbuildmat.2015.07.007 ↗
8. Recycled Steel Fibre Reinforced Concrete failing in bending and in shear10.1016/j.conbuildmat.2015.03.070 ↗
9. Fiber-reinforced concrete with low content of recycled steel fiber: shear behaviour10.1016/j.conbuildmat.2017.11.101 ↗
10. Scrap tire steel fiber as a substitute for commercial steel fiber in cement mortar: engineering properties and cost-benefit analyses10.1016/j.resconrec.2018.03.014 ↗
11. Mechanical behavior of concretes containing waste steel fibers recovered from scrap tires10.1016/j.conbuildmat.2016.06.113 ↗
12. Shrinkage and flexural behaviour of free and restrained hybrid steel fibre reinforced concrete10.1016/j.conbuildmat.2018.09.052 ↗
13. The recent progress of recycled steel fiber reinforced concrete10.1016/j.conbuildmat.2019.117232 ↗
14. Experimental study on engineering properties of concrete reinforced with hybrid recycled tyre steel and polypropylene fibres10.1016/j.jclepro.2020.120914 ↗
15. Behavior of high-performance concrete under uniaxial and biaxial loading
16. Effect of uniaxial strength and fracture parameters of concrete on its biaxial compressive strength10.1061/(ASCE)MT.1943-5533.0000919 ↗
17. Biaxial flexural behavior of ultra-high-performance fiber-reinforced concrete with different fiber lengths and placement methods10.1016/j.cemconcomp.2015.07.011 ↗
18. Biaxial behavior of high-performance fiber-reinforced cementitious composite plates10.1016/j.conbuildmat.2017.03.167 ↗
19. Behavior of high performance fiber reinforced cement composites under multi-axial compressive loading10.1016/j.cemconcomp.2009.09.003 ↗
20. Combined effects of steel fiber and strain rate on the biaxial compressive behavior of concrete10.1016/j.conbuildmat.2018.07.203 ↗
21. Fiber-reinforced concrete under biaxial compression10.1016/0013-7944(90)90204-T ↗
22. Failure envelope for steel-fiber concrete under biaxial compression10.1061/(ASCE)0899-1561(1993)5:4(436) ↗
23. Constitutive relation for steel fibre concrete under biaxial compression10.1016/0958-9465(94)90025-6 ↗
24. Behaviour of steel-fibre-reinforced concretes under biaxial compression loads10.1016/0958-9465(95)00027-A ↗
25. Modelling of steel fiber-reinforced concrete under multi-axial loads10.1016/j.cemconres.2006.03.008 ↗
26. American-Concrete-Institute-(ACI)-Committee-544, ACI 544. 7R-16 Report on Design and Construction of Fiber-Reinforced Precast Concrete Tunnel Segments, American Concrete Institute2016.
27. Biaxial behavior of plain concrete of nuclear containment building10.1016/j.nucengdes.2003.09.001 ↗
28. Finite element evaluation of the boundary conditions for biaxial testing of high strength concrete10.1007/BF02479700 ↗
29. Effect of platen restraint on stress-strain behavior of concrete under uniaxial compression: a comparative study10.1007/s11223-016-9802-z ↗
30. Residual flexural strengths of steel fiber reinforced concrete with multiple hooked-end fibers10.1002/suco.201700030 ↗
31. Strength and flexural toughness of concrete reinforced with steel-polypropylene hybrid fibres
32. Effect of size on the response of cylindrical concrete samples under cyclic loading10.1016/j.conbuildmat.2015.03.076 ↗
33. Behavior of concrete under biaxial stresses
34. Biaxial failure model for fiber reinforced concrete10.1061/(ASCE)0899-1561(2003)15:6(609) ↗
35. Constitutive modeling of steel-polypropylene hybrid fiber reinforced concrete using a non-associated plasticity and its numerical implementation10.1016/j.compstruct.2014.01.025 ↗
36. Plasticity model for hybrid fiber-reinforced concrete under true triaxial compression
37. Plasticity in reinforced concrete
38. Biaxial strength and deformational behavior of plain and steel fiber concrete