Effect of processed sugar cane bagasse ash on mechanical and fracture properties of blended mortar
Source abstract
Abstract
Abstract This paper explored the usage of Processed Sugar Cane Bagasse Ash (PSCBA) as various proportions in cement mortar. Partial replacement of Ordinary Portland Cement by PSCBA leads to reduction in greenhouse gas emission, prevention of natural resource utilization and less energy consumption apart from enhanced cement properties. Mechanical and fracture properties of control cement mortar (1:3, 1:4 and 1:5) and PSCBA incorporated cement mortar (1:3, 1:4 and 1:5) with varying amounts of PSCBA have been evaluated. From experimental results, it is observed that mechanical and fracture properties of cement mortar with 10% replacement of OPC by PSCBA shows enhanced properties and they are compared with other mixes. Increase in calcium silicate hydrate, decrease in ettringite and calcium hydroxide have been observed by FESEM and confirmed with XRD studies. Further, it was observed that the RILEM work of fracture with tail correction and boundary effect method resulted in nearly same size-independent fracture energy irrespective of the notch to depth ratio of same specimen.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. International Energy Agency (IEA), Global Status Report, 2017.
2. An experimental study on compressive strength of concrete by partial replacement of cement with sugarcane bagasse ash
3. Co-Processing magazine or alternative fuels & raw materials, Alternative fuel symposium, MVW Lectenberg & Partner Germany, 2018.
4. Low Carbon Transition in Cement Industry, 2018, International Energy Agency (IEA).
5. British Geological Survey (BGS), Cement Raw Materials, 2005.
6. Recent progress in green cement technology utilizing low carbon emission fuels and raw materials: a review
7. Major determinants of prices increase of building materials on construction market10.4236/ojce.2018.82012 ↗
8. The future of construction materials research and the seventh UN millennium development goals: a few insights10.1016/j.conbuildmat.2012.11.007 ↗
9. Fracture properties of alkali activated slag and ordinary Portland cement concrete and mortar10.1016/j.conbuildmat.2017.12.202 ↗
10. P. Jagadesh, A. Ramachandra Murthy, R. Murugesan, Evaluation of mechanical properties of sugar cane bagasse ash concrete, Constr. Build. Mater. 176 (2018a) 608–617. DOI: https://doi.org/10.1016/j.conbuildmat.2018.05.037.10.1016/j.conbuildmat.2018.05.037 ↗
11. Properties of blended cements made from rice husk ash
12. Sugar: World Markets & Trade, United States Department of Agriculture (USDA), Foreign Agriculture Services, 2018.
13. Handbook on Indian Sugar Mills Association, Indian Sugar Mills Association (ISMA), 2016.
14. Handbook on Indian Sugar Mills Association, Indian Sugar Mills Association (ISMA), 2017.
15. Handbook on Indian Sugar Mills Association, Indian Sugar Mills Association (ISMA), 2018.
16. P. Jagadesh, A. Ramachandra Murthy, R. Murugesan, Overview on properties of sugar cane bagasse ash (SCBA) as Pozzolan, Indian J. Geol. Sci. 47 (2018b) 1934–1945. DOI: https://nopr.niscair.res.in/handle/123456789/45169.
17. G.B. Lyra, V. Santos, B.C.D. Santis, R.R. Rivaben, C. Fisher, E.M.J.A. Pallone, J.A. Rossingnolo, Reuse of sugarcane bagasse ash to produce a lightweight aggregate using microwave oven sintering, Constr. Build. Mater. 222 (2019) 222–228. DOI: https://doi.org/10.1016/j.conbuildmat.2019.06.150.10.1016/j.conbuildmat.2019.06.150 ↗
18. P. Chindaprasirt, W. Kroehong, N. Damrongwiriyanupap, W. Suriyo, C. Jaturapitakkul, Mechanical properties, chloride resistance and microstructure of Portland fly ash cement concrete containing high volume bagasse ash, J. Build. Engg. 31 (2020). DOI: https://doi.org/10.1016/j.jobe.2020.101415.10.1016/j.jobe.2020.101415 ↗
19. Ultrafine grinding of sugar cane bagasse ash for application as pozzolanic admixture in concrete10.1016/j.cemconres.2008.11.005 ↗
20. Performance evaluation of sugarcane bagasse ash blended cement in concrete10.1016/j.cemconcomp.2015.03.004 ↗
21. Effects of LOI of ground bagasse ash on the compressive strength & sulfate resistance of mortars10.1016/j.conbuildmat.2009.06.046 ↗
22. Activation of bagasse ash in cement using different techniques10.1680/coma.900035 ↗
23. Micro-analytical studies on sugar cane bagasse ash, Sadana
24. Pozzolanic activity & filler effect of sugar cane bagasse ash in Portland cement & lime mortars10.1016/j.cemconcomp.2008.01.001 ↗
25. Physical and pozzolanic action of mineral additions on the mechanical strength of high-performance concrete10.1016/S0958-9465(01)00057-9 ↗
26. Hydration for Structural Engineering and Design
27. Strength, permeability and microstructure characterization of pulverized bagasse ash in cement mortars10.1016/j.conbuildmat.2019.117691 ↗
28. Adaptability of sugar cane bagasse ash in mortar10.1007/s40030-019-00359-x ↗
29. Sugar cane bagasse ash based engineered geopolymer mortar incorporating propylene fibres
30. Durability characteristics of ultra-high strength concrete with treated sugar cane bagasse ash10.1016/j.conbuildmat.2018.03.140 ↗
31. Effect of high temperatures on self-compacting concrete with high levels of sugar cane bagasse ash and metakaolin
32. Using nano silica to improve mechanical and fracture properties of fiber reinforced high volume fly ash cement mortar10.1016/j.conbuildmat.2019.117853 ↗
33. Determination of size independent specific fracture energy of concrete from three-point bend and wedge splitting tests10.1680/macr.2003.55.2.133 ↗
34. Bazant · 1998
35. TCM-85, Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beams10.1007/BF02472918 ↗
36. Measurement of the fracture energy using three-point bend tests: part 3 — influence of cutting the P-δ tail10.1007/BF02472591 ↗
37. Measurement of the fracture energy using three-point bend tests: part 1 — influence of experimental procedures10.1007/BF02473065 ↗
38. Measurement of the fracture energy using three-point bend tests: part 2 — influence of bulk energy dissipation10.1007/BF02472671 ↗
39. Size effect on toughness induced by crack close to free surface10.1016/S0013-7944(99)00123-X ↗
40. Determination of size independent specific fracture energy of concrete mixes by two methods10.1016/j.cemconres.2013.03.015 ↗
41. Measuring the size independent fracture energy of concrete10.1111/str.12012 ↗
42. Generalized fracture toughness and compressive strength of sustainable concrete including low calcium fly ash10.3390/ma10121393 ↗
43. Dynamic fracture behaviour of alkali-activated mortars: effects of composition, curing time and loading rate10.1016/j.engfracmech.2019.01.017 ↗
44. Effect of wetting-drying cycles on mode I and mode II fracture toughness of cement mortar and concrete
45. Indian Standard 12269 – 1993. Specifications for 53 grade ordinary Portland cement. First reprint, Bureau of Indian Standards, New Delhi, 1993.
46. Indian Standard 2386 – 1997. Method of test for aggregates for concrete, Part 3 – Specific gravity, density, voids, absorption and bulking, Eighth print, Bureau of Indian Standards, New Delhi, 1997.
47. Indian Standard 2386 – 1997. Method of test for aggregates for concrete, Part 1 – Particle size and shape, Eleventh print, Bureau of Indian Standards, New Delhi, 1997.
48. Indian Standard 5513 – 2004, Specifications for flow table for use in tests of hydraulic cements and pozzolanic materials, Bureau of Indian Standards, New Delhi, 2004.
49. ASTM C 230-98. Specification for flow table for use in tests of hydraulic cement. In: Annual book of standards, 2001.
50. IS 4031 (Part 6), · 2005
51. IS 5816:2005, Splitting tensile strength of concrete – method of test, Bureau of Indian Standards, New Delhi.
52. Fracture energy and fracture process zone10.1007/BF02472590 ↗
53. Size effect: influence of proximity of fracture process zone to specimen boundary10.1016/j.engfracmech.2006.12.009 ↗
54. Shah · 2012 · Vol. 94
55. Size effect on fracture energy of concrete determined by three-point bending10.1016/S0008-8846(97)00100-2 ↗
56. Determination of the back-boundary effect on self-compacting concrete beams: bilinear and trilinear approaches10.1007/s10704-015-0011-8 ↗
57. Comparison of methods for arresting hydration of cement10.1016/j.cemconres.2011.06.003 ↗
58. Quiroga · 2003
59. Influence of aggregates grading and water/cement ratio in workability and hardened properties of mortars10.1016/j.conbuildmat.2010.11.011 ↗
60. Utilization of bagasse ash as a pozzolanic material in concrete10.1016/j.conbuildmat.2009.06.030 ↗
61. Use of bagasse ash in cement & its impact on the mechanical behavior & chloride resistivity of mortar10.1680/adcr.9.00023 ↗
62. Hewlett · 2004
63. The effect of fly ash fineness on heat of hydration, microstructure, flow and compressive strength of blended cement pastes
64. Reuse of sugarcane bagasse ash (SCBA) to produce ceramic materials10.1016/j.jenvman.2011.06.020 ↗
65. The influence of aggregate type on W/C ratio on the strength and other properties of concrete
66. Resistance of mineral admixtures concrete to acid attack’10.3151/jact.7.273 ↗
67. Evaluation of bagasse ash supplementary cementitious material’10.1016/j.cemconcomp.2007.03.001 ↗
68. Influence of quicklime addition on the mechanical properties and hydration degree of blended cements containing different fly ashes10.1016/j.conbuildmat.2007.02.001 ↗
69. Performance of irradiated blended cement paste composites containing ceramic waste powder towards sulfates, chlorides and sea water attack10.1002/vnl.21712 ↗
70. The effect of lime stone powder, fly ash and silica fume on the properties of self-compacting repair mortars
71. The mechanism of cesium immobilization in densified silica fume blended cement pastes10.1016/j.cemconres.2007.09.017 ↗
72. E. Djaknoun, E. Ouedraogo, Fracture energy of high-performance mortar subjected to high temperature, Proceedings of Fracture Mechanics of concrete and concrete structures, Seoul, South Korea, (2010) 73–78.
73. Residual fracture energy of cement paste, mortar and concrete subject to high temperature10.1016/j.tafmec.2005.11.007 ↗
74. Mechanical and fracture characteristics of eco-friendly concrete produced using coconut shell, ground granulated blast furnace slag and M Sand10.1016/j.conbuildmat.2015.11.035 ↗
75. Experiments and analyses of fracture properties of grouting mortars, Part 1: theoretical and numerical methods in fracture mechanics of concrete
76. Effects of fly ash on fatigue and fracture properties of hardened cement mortar10.1016/S0958-9465(99)00005-0 ↗
77. Microstructural aspects of the fracture of hardened cement paste
78. Z.P. Bazant, E. Becq-Giraudon, Estimation of fracture energy from basic characteristics of concrete, Proceedings of International conference on Fracture Mechanics concrete structures., Paris, 32(1) (2001) 1-491.
79. Effect of steel fibres and nano silica on fracture strength of medium strength concrete
80. R.V. Sagar, B.K.R. Prasad, Determination of size independent specific fracture energy and acoustic emission energy of concrete, in: Proceedings of Fracture mechanics of concrete and concrete structures – Recent advances in fracture mechanics of concrete, Korea Concrete Institute, Seoul, pp.129–134, 2010.
81. A. Ramachandra Murthy, B.L. Karihaloo, N.R. Iyer, B.R. Prasad, Bilinear tension softening diagrams of concrete mixes corresponding to their size independent specific fracture energy, Constr. Build. Mater. 47 (2013)1160–1166. DOI. https://doi.org/10.1016/j.conbuildmat.2013.06.004.10.1016/j.conbuildmat.2013.06.004 ↗
82. A review on concrete fracture energy and effective parameters10.1016/j.cemconres.2019.03.013 ↗
83. Statistical prediction of fracture parameters of concrete and implications for choice of testing standard10.1016/S0008-8846(01)00723-2 ↗
84. Effect of fly ash and slag on the fracture characteristics of high-performance concrete10.1007/BF02480576 ↗
85. Fracture parameters for high-performance concrete10.1016/j.cemconres.2005.09.004 ↗
86. The influence of coarse aggregate size and volume on the fracture behaviour and brittleness of self-compacting concrete10.1016/j.cemconres.2014.06.008 ↗
87. Influence of mineral powder content on the fracture behaviours and ductility of self-compacting concrete
88. The effect of water cement ratio on the fracture parameters and brittleness of self-compacting concrete10.1016/j.matdes.2013.02.018 ↗
89. Fracture parameters of cement mortar with different structural dimensions under the direct tension test10.3390/ma12111850 ↗
90. Characterization of unburned carbon in bagasse fly ash10.1016/j.fuel.2008.04.010 ↗
91. Kurdowski · 2010
92. Recent progress in green cement technology utilizing low carbon emission fuels and raw materials: review
93. Usage of supplementary cementitious materials: advantages and limitations. Part I. C-S-H, C-A-S-H and other products formed in different binding mixtures
94. Effect of supplementary cementitious materials (SCM) on delayed ettringite formation in heat cured concretes10.1016/j.egypro.2017.11.254 ↗
95. Utilization of by products and wastes as supplementary cementitious materials in structural mortar for sustainable construction
96. Comparison of fly ash, silica fume and metakaolin from mechanical properties and durability performance of mortar mixture viewpoints
97. Macgregor, Mechanical properties of three high strength concretes containing silica fume
98. Karr, Fracture properties and brittleness of high strength concrete
99. Fracture energy and softening behavior of high strength concrete10.1016/S0008-8846(01)00667-6 ↗
100. Influence of age of loading, water cement ratio and rate of loading on fracture energy of concrete10.1007/BF02472745 ↗