journal article·2020-11

Optimal formulation design of polymer-modified cement based grouting material for loose deposits

Cong Zhang, Junsheng Yang, Jinyang Fu, Shuying Wang, Jian Yin, Xue feng Ou, Yipeng Xie

Publisher page

Abstract

Abstract Due to material requirements for grouting in loose deposits, a new polymer-modified cement grout (PMCG) material was designed by addicting polyethylene glycol (PEG), polycarboxylate superplasticizer (PS) and sodium silicate into the cement grout. Then, the properties of PMCG were predicted statistically by using the response surface method (RSM) and the effects of the four parameters (w/c, PEG content, sodium silicate content and PS content) as well as their interaction on the response variables (fluidity, bleeding rate, gel time, and early strength) were investigated. Furthermore, the optimal formulation of PMCG (w/c of 0.9, 8.7% sodium silicate, 4% PEG and 1% PS) can be obtained using a multi-objective optimization technique considering the multi-performance requirements of grouting material in loose deposit. Finally, the macro-performance of the grouting material formed by optimal formulation was validated by a set of experiments. The results demonstrated that the proposed designing method can work effectively in determining the optimal formulation of the grouting material to meet various engineering demands.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Grouting, Rheology, and Soil Mechanics · Microbial Applications in Construction Materials · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Geomechanical characterization of the volcaniclastic material involved in the 2002 Landslides at Stromboli10.1061/(ASCE)GT.1943-5606.0000218 ↗
2. An elasto-viscoplastic model for soft rock around tunnels considering over consolidation and structure effects10.1016/j.compgeo.2012.12.004 ↗
3. Traces of paleoearthquakes in the quaternary deposits of intermontane basins in central gorny altai10.1016/j.rgg.2013.02.006 ↗
4. Deformational characteristics of weak sandstone and impact to tunnel deformation10.1016/S0886-7798(02)00011-1 ↗
5. Deformation behaviour of tunnel face reinforced with longitudinal pipes laboratory and numerical investigation10.1016/S0886-7798(02)00101-3 ↗
6. Determination of the round length for tunnel excavation in weak rock10.1016/j.tust.2007.04.001 ↗
7. Elastoplastic analysis of the seismic response of tunnels in soft soils10.1016/j.tust.2010.01.006 ↗
8. Numerical modeling of tunnel excavation in weak sandstone using a time-dependent anisotropic degradation model10.1016/j.tust.2010.02.004 ↗
9. Finite element analysis of long-term surface settlement above a shallow tunnel in soft ground10.1016/j.tust.2012.02.010 ↗
10. Time-dependent behavior of tunnel lining in weak rock mass based on displacement back analysis method10.1016/j.tust.2013.07.014 ↗
11. Cracking mechanism of secondary lining for a shallow and asymmetrically-loaded tunnel in loose deposits10.1016/j.tust.2014.05.013 ↗
12. Dynamic numerical investigation of a stepped-planar rockslide in the Central Andes10.1016/j.enggeo.2018.02.001 ↗
13. Formulation and performance of grouting materials for underwater shield tunnel construction in karst ground10.1016/j.conbuildmat.2018.07.054 ↗
14. Foam grout saves tunnel
15. Development of two new anti-washout grouting materials using multi-way ANOVA in conjunction with grey relational analysis10.1016/j.conbuildmat.2017.08.126 ↗
16. The kinetics study and reaction mechanism of acrylate grouting materials
17. The effects of nano-calcined kaolinite clay on cement mortar exposed to acid deposits10.1016/j.conbuildmat.2015.11.016 ↗
18. Effects of deicing salt solutions on physical properties of pavement concretes10.3141/2290-09 ↗
19. W. Kurdowski, Cement Hydration. Cement and Concrete Chemistry. Springer Netherlands, 2014, doi: 10.1007/978-94-007-7945-7_4.10.1007/978-94-007-7945-7 ↗
20. Y. Zhou, D. Hou, J. Jiang, W. She, et al., Reactive molecular simulation on the calcium silicate hydrates/polyethylene glycol composites. Chem. Phys. Lett., 687 (2017) 184–187, doi: 10.1016/j.cplett.2017.09.020.10.1016/j.cplett.2017.09.020 ↗
21. Chemical modification of silica gels10.1023/A:1018350227105 ↗
22. Effect of jet-grout columns on the seismic response of layered soil deposits
23. Role of steric hindrance in the performance of superplasticizers for concrete10.1111/j.1151-2916.1997.tb03169.x ↗
24. GB 175-2007, Common Portland Cement. Standardization Administration of the People's Republic of China, Beijing, China, 2008.
25. JGJT21110, Technical specification for cement-silicate grouting in building engineering. Ministry of Housing and Urban-Rural Construction of the People's Republic of China, Beijing, China, 2010.
26. GB8076-2008, Concrete admixtures. Standardization Administration of the People's Republic of China, Beijing, China, 2009.
27. GJB 5264-2003, Specification for polyethylene glycol. China Commission of Science Technology and Industry for National Defense, Beijing, China, 2004.
28. Response surface methodology (RSM) as a tool for optimization in analytical chemistry10.1016/j.talanta.2008.05.019 ↗
29. Optimization of transesterification of castor oil with ethanol using a central composite rotatable design10.1016/j.fuel.2009.10.029 ↗
30. C. Zhang, J. Yang, X. Ou, et al., Clay dosage and water/cement ratio of clay-cement grout for optimal engineering performance, Appl. Clay. Sci. 163 (2018) 312–318, doi: 10.1016/j.clay.2018.07.035.10.1016/j.clay.2018.07.035 ↗
31. A new clay-cement composite grouting material for tunnelling in underwater karst area10.1007/s11771-019-4140-5 ↗
32. GB 50010-2010, Code for design of concrete structures. Ministry of Housing and Urban-rural Development of the People’s Republic of China, Beijing, Chinese, 2011.
33. D. Sarbapalli, Y. Dhabalia, K. Sarkar, et al., Application of sap and peg as curing agents for ordinary cement-based systems: impact on the early age properties of paste and mortar with water-to-cement ratio of 0.4 and above. Eur. J. Environ. Civ. En., 21 (10) (2016) 1237–1252, doi: 10.1080/19648189.2016.1160843.10.1080/19648189.2016.1160843 ↗
34. J. Ding, Y. Fu, J.J. Beaudoin, Study of hydration mechanisms in the high alumina cement-sodium silicate system. Cement. Concrete. Res., 26 (5) (1996) 799–804, doi: 10. 1016/s0008-8846(96)85017-4.10.1016/S0008-8846(96)85017-4 ↗
35. Setting time and flowability of accelerated Portland cement mixed with polycarboxylate superplasticizer10.1016/j.joen.2010.11.039 ↗
36. Relation between the shape of silica fume and the fluidity of cement paste at low water to powder ratio
37. Impact of sulfate attack on mechanical properties and hydraulic conductivity of a cement-admixed10.1016/j.clay.2014.09.012 ↗
38. S. Goberis, V. Antonovich, Influence of sodium silicate amount on the setting time and EXO temperature of a complex binder consisting of high-aluminate cement, liquid glass and metallurgical slag. Cement. Concrete. Res., 34 (10) (2004) 1939–1941, doi: 10.1016/j.cemconres.2004.01.004.10.1016/j.cemconres.2004.01.004 ↗
39. Mechanical property and in vitro biocompatibility of brushite cement modified by polyethylene glycol Mater
40. Combined effect of mineral admixtures with superplasticizers on the fluidity of the blended cement paste10.1016/j.conbuildmat.2010.01.015 ↗
41. Taguchi approach for optimization of the bleeding on cement-based grouts10.1016/j.tust.2004.08.004 ↗
42. Grouting rock fractures with cement and sodium silicate grout10.1007/s13146-016-0332-3 ↗
43. Eco-efficient ultra-high performance concrete development by means of response surface methodology10.1016/j.cemconcomp.2017.08.019 ↗