journal article·2021-02

Enhancing impact resistance of hybrid ultra-high-performance fiber-reinforced concretes through strategic use of polyamide fibers

Tuan Kiet Tran, Ngoc Thanh Tran, Dong Joo KIm

Publisher page

Abstract

Abstract This study examines the use of polyamide fibers in improving strain rate sensitivity and impact tensile resistance of hybrid ultra-high-performance fiber-reinforced concrete (hybrid UHPFRC). Two types of long fibers, i.e., smooth steel (S) and polyamide (P), and two types of short fibers, i.e., smooth steel (s) and polyamide (p), were hybridized. The volume content of long fibers was maintained at 1%, whereas that of short fibers varied from 0 to 1%. The blending S and p fibers produced the best performance in term of the ductility and energy absorption capacity of UHPFRC whereas the blending S and s fibers did in term of the ultimate tensile strength. The optimal volume content of short fiber that exhibited improvements in strain rate sensitivity and impact resistance was found to be 0.5%. The p fibers have been successfully used to develop cost-effective hybrid UHPFRC with high impact resistance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Impact response of ultra-high-strength fiber-reinforced cement composite
2. Mechanical and structural behaviors of ultra-high-performance fiber-reinforced concrete subjected to impact and blast10.1016/j.conbuildmat.2017.05.136 ↗
3. Experimental study on ultra-high performance concrete with high fire resistance under simultaneous effect of elevated temperature and impact loading10.1016/j.cemconcomp.2019.01.017 ↗
4. D.Y. Yoo, N. Banthia, Y.-S. Yoon, Impact resistance of reinforced ultra-high-performance concrete beams with different steel fibers, ACI Struct. J. (2017).10.14359/51689430 ↗
5. Synergy in shear response of ultra-high-performance hybrid-fiber-reinforced concrete at high strain rates
6. Constitutive model of ultra-high-performance fiber-reinforced concrete for low-velocity impact simulations10.1016/j.compstruct.2017.11.022 ↗
7. High tensile strength strain-hardening FRC composites with less than 2% fiber content
8. Direct tensile behavior of ultra high performance fiber reinforced concrete (UHP-FRC) at high strain rates10.1016/j.cemconres.2016.07.003 ↗
9. Effects of steel fibres on dynamic strength of UHPC10.1016/j.conbuildmat.2016.04.007 ↗
10. Experimental study of dynamic mechanical properties of reactive powder concrete under high-strain-rate impacts10.1007/s11431-010-4061-x ↗
11. Static properties and impact resistance of a green Ultra-High Performance Hybrid Fibre Reinforced Concrete (UHPHFRC): Experiments and modeling10.1016/j.conbuildmat.2014.06.033 ↗
12. High rate response of ultra-high-performance fiber-reinforced concretes under direct tension10.1016/j.cemconres.2014.12.008 ↗
13. Influences of nano-particles on dynamic strength of ultra-high performance concrete10.1016/j.compositesb.2016.01.044 ↗
14. Composition of reactive powder concretes10.1016/0008-8846(95)00144-2 ↗
15. Synergistic response of blending fibers in ultra-high-performance concrete under high rate tensile loads10.1016/j.cemconcomp.2017.01.008 ↗
16. A study on the efficiency of steel vs. synthetic vs. hybrid fibers on fracture behavior of concrete in flexure using acoustic emission10.1016/j.conbuildmat.2018.12.011 ↗
17. Strength properties of hybrid nylon-steel and polypropylene-steel fibre-reinforced high strength concrete at low volume fraction
18. Comparative flexural behavior of ultra-high-performance concrete reinforced with hybrid straight steel fibers10.1016/j.conbuildmat.2016.11.104 ↗
19. High energy absorbent ultra-high-performance concrete with hybrid steel and polyethylene fibers10.1016/j.conbuildmat.2019.03.096 ↗
20. Hybrid effects of steel fiber and microfiber on the tensile behavior of ultra-high performance concrete10.1016/j.compstruct.2016.02.075 ↗
21. Response of small scale ultra high performance fibre reinforced concrete slabs to blast loading10.1016/j.conbuildmat.2015.05.085 ↗
22. Dynamic enhancement of blast-resistant ultra high performance fibre-reinforced concrete under flexural and shear loading10.1016/j.ijimpeng.2009.09.004 ↗
23. Energy absorption capacity of a sustainable Ultra-High Performance Fibre Reinforced Concrete (UHPFRC) in quasi-static mode and under high velocity projectile impact10.1016/j.cemconcomp.2016.02.012 ↗
24. Korea Concrete Institute · 2012
25. ASTM C39/C39M - 20, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA (2013).
26. Association Française de Génie Civil (AFGC), French Interim Recommendations of Ultra High Performance Fibre Reinforced Concrete (UHPFRC), French association of civil engineering (2002)
27. ASTM C1437-15, Standard Test Method for Flow of Hydraulic Cement Mortar, ASTM International, West Conshohocken, PA (2015).
28. ASTM C1856/C1856M-17, Standard Practice for Fabricating and Testing Specimens of Ultra-High Performance Concrete, ASTM International, West Conshohocken, PA (2017).
29. J.H. Yoon, J.K. Jeon, Y.K. Kim, J.M. Chung, A feasibility study on polyamide fiber reinforced shotcrete for rock support in a tunnel polyamide fiber reinforced shotcrete lab tests, In: Anagnostou G. & Ehrbar (eds), World Tunnel Congress 2013 Geneva Underground - the way to the future, Geneva, Switzerland, 201310.1201/b14769-209 ↗
30. V. Perry, G. Weiss, Innovative field cast UHPC joints for precast bridge decks design, prototype testing and projects, in: Proceedings of the International Workshop on Ultra High Performance Fibre Reinforced Concrete Designing and Building with UHPFRC: State of the Art Development, Marseille, France, 2009.
31. J.S. Park, Y.J. Kim, J.R. Cho, S.J. Jeon, Early-age strength of ultra-high performance concrete in various curing conditions, Materials 8 (2015) 5537–5553.10.3390/ma8085261 ↗
32. Investigating direct tensile behavior of high performance fiber reinforced cementitious composites at high strain rates10.1016/j.cemconres.2013.03.018 ↗
33. Size-dependent impact resistance of ultra-high-performance fiber-reinforced concrete beams10.1016/j.conbuildmat.2017.03.080 ↗
34. Impact of using different amounts of polyolefin macro fibers on fracture behavior, size effect, and mechanical properties of self-compacting lightweight concrete10.1016/j.conbuildmat.2020.118856 ↗
35. Size effect on flexural behavior of ultra-high-performance hybrid fiber-reinforced concrete10.1016/j.compositesb.2012.07.012 ↗
36. Size effect in ultra-high-performance concrete beams10.1016/j.engfracmech.2016.02.009 ↗
37. Size and geometry dependent tensile behavior of ultra-high-performance fiber-reinforced concrete10.1016/j.compositesb.2013.10.072 ↗
38. Dynamic pullout behavior of multiple steel fibers in UHPC: Effects of fiber geometry, inclination angle, and loading rate10.3390/ma12203365 ↗
39. Tensile rate effects in high strength-high ductility concrete10.1016/j.cemconres.2014.11.005 ↗
40. Pull-out mechanism in steel fibre reinforced concrete10.1061/JSDEAG.0004409 ↗
41. Effect of shrinkage reducing agent on pullout resistance of high-strength steel fibers embedded in ultra-high-performance concrete10.1016/j.cemconcomp.2013.12.012 ↗
42. Effect of hybrid fibers on flexural and tensile properties of ultrahigh performance fiber-reinforced cementitious composites: Experiments and calculation10.1061/(ASCE)MT.1943-5533.0003102 ↗
43. Experimental procedure for determination of the energy dissipation capacity of ultrahigh-performance fibre reinforced concrete under localized impact loading
44. Dynamic crack propagation problems of fibre-reinforced concrete10.1155/2012/971472 ↗
45. Impact resistance of hybrid fibre reinforced concrete containing sisal fibres10.1016/j.asej.2018.12.004 ↗