journal article·2021-02

Characteristics of void distribution and aggregate degradation of asphalt mixture specimens compacted using field and laboratory methods

Yupeng Li, Wei Jiang, Jinhuan Shan, Pengfei Li, Rong Lu, Baowen Lou

Publisher page

Abstract

Abstract Asphalt mixtures compacted in the field and in a laboratory show obvious differences in their internal structures, and this affects the evaluation of pavement performance. Hence, in this study, to find a laboratory compaction method most similar to the field method, the effect of the field method and multiple laboratory compaction methods on the internal structure of asphalt mixture specimens was investigated. First, based on the principle of keeping the same compaction degree, specimens cored from field specimens were prepared with six laboratory methods. Then X-ray computed tomography (X-ray CT) and digital image processing (DIP) technologies were used to analyze the internal structure of the specimens, including the spatial distribution and particle size of the voids, as well as the aggregate degradation. Finally, the similarity of the laboratory specimens to the field specimens was evaluated. The results indicated that the spatial distribution of the voids was affected by the compaction methods. The edge effect was different in specimens with different heights. The symmetry of the distribution curve of the air voids was affected by the distribution of the compaction effort. The void particles in a certain size range occupied most of the volume, and the size distribution of the void particles inside the specimens was affected by the compaction methods. In the compaction process of the static load method, the aggregates were constrained and seriously broken, while the dynamic load and the kneading action could protect aggregates from being broken. In general, the partial specimens compacted using a Superpave gyratory compactor (SGC) and a shear box compactor (SBC) were more similar to the field specimens than other laboratory specimens. This study offers a reliable basis for studying the internal structure of asphalt mixture specimens compacted using different methods and for guiding laboratory compaction based on the field method.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Method for Predicting the Laboratory Compaction Behavior of Asphalt Mixtures10.1061/(ASCE)MT.1943-5533.0001244 ↗
2. Performance-based design of asphalt mixtures and review of key parameters10.1016/j.matdes.2017.12.035 ↗
3. Design and laboratory evaluation of small particle porous epoxy asphalt surface mixture for roadway pavements10.1016/j.conbuildmat.2014.12.056 ↗
4. Tashman · 2000
5. Dynamic optimization of compaction process for rockfill materials10.1016/j.autcon.2019.103038 ↗
6. Density profile of hot mix asphalt layer during compaction with various types of rollers and lift thickness10.1016/j.conbuildmat.2016.05.129 ↗
7. Collaborative operation and real-time control of roller fleet for asphalt pavement compaction10.1016/j.autcon.2018.11.005 ↗
8. Analysis of aggregate particle migration properties during compaction process of asphalt mixture10.1016/j.conbuildmat.2018.11.164 ↗
9. Mechanical and structural assessment of laboratory- and field-compacted asphalt mixtures10.1080/10298436.2014.925551 ↗
10. ASTM D 6926, Standard practice for preparation of bituminous specimens using Marshall apparatus, ASTM International West Conshohocken, PA, USA, 2010.
11. Evaluation of the hot mix asphalt compactability utilizing the impact compaction method10.1016/j.conbuildmat.2018.07.117 ↗
12. Evaluation of the laboratory compaction method on the air voids and the mechanical behavior of hot mix asphalt10.1016/j.conbuildmat.2017.08.178 ↗
13. AASHTO PP 60, Standard practice for preparation of cylindrical performance test specimens using the SUPERPAVE gyratory compactor (SGC), American Association of State Highway Transportation Officials, Washington, DC, 2011.
14. AASHTO T 312, Preparing and determining the density of hot-mix asphalt (HMA) specimens by means of the superpave gyratory compactor, American Association of State Highway Transportation Officials, Washington, DC, 2004.
15. Determining Gyratory Compaction Characteristics Using Servopac Gyratory Compactor10.3141/1630-11 ↗
16. JTG E20-2011, Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering, Ministry of Transport of the People’s Republic of China Beijing, China, 2011.
17. B. Hofko, Influence of Compaction Direction on Performance Characteristics of Roller-Compacted HMA Specimens, Airfield and Highway Pavement 20132013, pp. 1051-1063.10.1061/9780784413005.088 ↗
18. ASTM D 7981, Standard practice for compaction of prismatic asphalt specimens by means of the shear box compactor, ASTM International West Conshohocken, PA, USA, 2015.
19. Investigation into the performance of asphalt mixture designed using different methods10.1016/j.conbuildmat.2018.05.108 ↗
20. Laboratory and field evaluation of the warm fiber reinforced high performance asphalt mixtures (case study Karaj – Chaloos Road)10.1016/j.conbuildmat.2016.05.139 ↗
21. Moisture Damage of Bituminous Pavements and Application of Nanotechnology in Its Prevention10.1061/(ASCE)MT.1943-5533.0003293 ↗
22. Influence of asphalt compaction procedure on 3D deformation properties10.1080/10298436.2013.812213 ↗
23. Effect of Compaction Mode on the Mechanical Performance and Variability of Asphalt Mixtures10.1061/(ASCE)0733-947X(2009)135:11(839) ↗
24. V. Boel, V. Cnudde, G. De Schutter, P. Jacobs, Exploring the potential of X-ray tomography in microstructural studies of cementitious systems, 2nd International RILEM Symposium on Advances in Concrete through Science and Engineering, RILEM Publications SARL, 2006.10.1617/2351580028.018 ↗
25. A.C. Kak, M. Slaney, G. Wang, Principles of computerized tomographic imaging, Med. Phys. 29(1) (2002) 107-107.10.1118/1.1455742 ↗
26. Comparison of medical and industrial X-ray computed tomography for non-destructive testing
27. Three-dimensional modeling and simulation of asphalt concrete mixtures based on X-ray CT microstructure images10.1016/S2095-7564(15)30089-1 ↗
28. M. Vicente, J. Mínguez, D.C. González, The use of computed tomography to explore the microstructure of materials in civil engineering: from rocks to concrete, InTech2017.10.5772/intechopen.69245 ↗
29. Microstructural analysis of asphalt mixtures using digital image processing techniques10.1139/cjce-2013-0250 ↗
30. Influence of aggregates’ spatial characteristics on air-voids in asphalt mixture10.1080/14680629.2017.1279072 ↗
31. X-ray tomography of asphalt concrete10.3141/1681-22 ↗
32. Internal Structure Characterization of Asphalt Concrete Using Image Analysis10.1061/(ASCE)0887-3801(1999)13:2(88) ↗
33. Three-dimensional image processing methods to identify and characterise aggregates in compacted asphalt mixtures10.1080/10298431003749725 ↗
34. Gradation measurement of asphalt mixture by X-Ray CT images and digital image processing methods10.1016/j.measurement.2018.09.066 ↗
35. Influence of the compaction process on the air void homogeneity of asphalt mixtures samples10.1016/j.conbuildmat.2009.12.004 ↗
36. Quantifying Laboratory Compaction Effects on the Internal Structure of Asphalt Concrete10.3141/1681-21 ↗
37. Performance of Stone Mastic Asphalt Mixtures Fabricated by Different Compaction Methods10.3390/app10072523 ↗
38. M.A. Abed, A.H. Abed, Effect of Compaction Methods on the Morphology of Aggregates in Hot Mix Asphalt, IOP Conf. Ser., Mater. Sci. Eng. (UK) 671 (2020) 012119 (15 pp.)-012119 (15 pp.).10.1088/1757-899X/671/1/012119 ↗
39. The influence of aggregate shape properties on aggregate packing in porous asphalt mixture (PAM)10.1016/j.conbuildmat.2020.119379 ↗
40. R.N. Linden, J.P. Mahoney, N.C. Jackson, Effect of compaction on asphalt concrete performance, Transp. Res. Rec. (1217) (1989)
41. Primary investigation on the relationship between microstructural characteristics and the mechanical performance of asphalt mixtures with different compaction degrees10.1016/j.conbuildmat.2019.07.039 ↗
42. The effect of asphalt mixture gradation and compaction energy on aggregate degradation10.1016/j.conbuildmat.2006.11.022 ↗
43. Rutting analysis of 100 mm diameter polypropylene modified asphalt specimens using gyratory and Marshall compactors10.1590/S1516-14392013005000016 ↗
44. J.W. Button, D.N. Little, V. Jagadam, O.J. Pendleton, Correlation of selected laboratory compaction methods with field compaction, Transp. Res. Rec. (1454) (1994).
45. F.M. Jakarni, R. Muniandy, Properties of stone mastic asphalt slabs compacted using a newly developed roller compactor, M. Sc. Thesis, Universiti Putra Malaysia: Malaysia, 2006.
46. H.M. Radzi, R. Muniandy, S. Hassim, T.H. Law, F.M. Jakarni, An overview of asphalt mix designs using various compactors, IOP Conf. Ser., Mater. Sci. Eng. (UK) 512 (2019) 012031 (8 pp.)-012031 (8 pp.).10.1088/1757-899X/512/1/012031 ↗
47. Characterization of Air Void Distribution in Asphalt Mixes using X-ray Computed Tomography10.1061/(ASCE)0899-1561(2002)14:2(122) ↗
48. Internal structure evolution of asphalt mixtures during freeze–thaw cycles10.1016/j.matdes.2015.07.073 ↗
49. ASTM D 2172, Standard Test Methods for Quantitative Extraction of Bitumen from Bituminous Paving Mixtures, ASTM International West Conshohocken, PA, USA, 2017.
50. ASTM D 2041, Standard test method for theoretical maximum specific gravity and density of bituminous paving mixtures, ASTM International West Conshohocken, PA, USA, 2011.
51. Evaluation of compactability and mechanical properties of bituminous mixes with warm additives10.1016/j.conbuildmat.2010.11.024 ↗
52. S. Sadasivam, Evaluation of the effects of compaction methods on the predicted performance of Superpave mixtures, (2004).
53. H. Bahia, A. Faheem, Using gyratory compactor to measure mechanical stability of asphalt mixtures, 2004.
54. Beam hardening correction for X-ray computed tomography of heterogeneous natural materials10.1016/j.cageo.2014.03.003 ↗
55. Characterization of air voids in cold in-place recycling mixtures using X-ray computed tomography10.1016/j.conbuildmat.2015.03.081 ↗