Fracture behaviour of hybrid fibre-reinforced roller-compacted concrete used in pavements
Source abstract
Abstract
Abstract The aim of the present paper is to investigate the fracture properties of hybrid fibre-reinforced Roller-Compacted Concretes (RCCs), typically used in pavements. More precisely, tests to determine fracture toughness are performed, including both single and hybrid fibre-reinforced concrete specimens. Plain concrete specimens are also tested for comparison with the previous ones. The Modified Two Parameter Model, formulated by some of the present authors, is employed in order to compute the mixed-mode fracture toughness. Moreover, the ductility is evaluated through a toughness index, and the effect of the reinforcing fibres on the material post-peak behaviour is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. ACI Committee 116R-00, Report on “Cement and Concrete Terminology”. Report 116R-00. American Concrete Institute, Farmington Hills, Mich., 2000.
2. ACI Committee 207.5R-99, Report on “Roller–Compacted Mass Concrete” Report 207R-99, American Concrete Institute, Farmington Hills, Mich., 1999.
3. G. Gentile, Study, Preparation, and Placement of Low Cement Concrete, with Special Regard to its use in Solid Gravity Dams. Transactions, International Congress on Large Dams, R16 Q 30. International Commission on Large Dams (ICOLD), Paris, France, 1964.
4. V.M. Wallingford, Proposed New Technique for Construction of Concrete Gravity Dams. Transactions, 10th International Congress on Large Dams, Montreal, Quebec, Canada, 1970; International Commission on Large Dams (ICOLD), Paris, V. 4, pp. 439–452.
5. ACI Committee 325.10R-95. Report on Roller-Compacted Concrete Pavements. 325.10R-95. American Concrete Institute, Farmington Hills, Mich., 1995.
6. R.W. Piggott, Roller Compacted Concrete Pavements: A Study of Long Term Performance. PCA R&D Serial No. 2261. Portland Cement Association, Skokie, Ill., 1999.
7. Fracture properties of roller-compacted concrete with virgin and recycled aggregates10.3141/2441-17 ↗
8. Cannon · 1972 · 143
9. M.R.H. Dunstan, Rolled Concrete for Dams— Laboratory Study of Properties of High Fly Ash Content Concrete. CIRIA Technical Note 105, London, May 1981.
10. Bureau · 1981
11. C. Jofre, R. Fernandez, A. Josa, F. Molina, Spanish Experience with RCC pavements, Proc. Roller Compacted Concr. II, San Diego, California (1988) 467–484.
12. Mechanical properties of roller compacted concrete containing rice husk ash with original and recycled asphalt pavement material10.1016/j.matdes.2014.07.072 ↗
13. Transport properties of high volume fly ash roller compacted concrete10.1016/j.cemconcomp.2011.07.010 ↗
14. Fatigue resistance and cracking mechanism of concrete pavements reinforced with recycled steel fibres recovered from post-consumer tyres10.1016/j.engstruct.2012.06.030 ↗
15. Crack behavior analysis of roller compacted concrete mixtures containing reclaimed asphalt pavement and crumb rubber10.1016/j.engfracmech.2017.05.011 ↗
16. Evaluation of pure and mixed modes (I/III) fracture toughness of Portland cement concrete mixtures containing reclaimed asphalt pavement10.1016/j.conbuildmat.2018.05.130 ↗
17. Experimental research on the fracture properties of roller compacted steel fiber recycled concrete
18. Use of concrete road recycled aggregates for roller compacted concrete10.1016/j.conbuildmat.2009.08.040 ↗
19. Fracture characterization of roller compacted concrete mixtures with blast furnace slag and industrial sand
20. Flexural strengths and fibre efficiency of steel-fibre-reinforced, roller-compacted, polymer modified concrete10.1016/j.conbuildmat.2015.04.059 ↗
21. Investigation of intrinsic de-bonding in bonded concrete overlays: Material characterisation and numerical study10.5267/j.esm.2018.1.003 ↗
22. Evaluating the effect of macro-synthetic fibre on the mechanical properties of roller-compacted concrete pavement using response surface methodology10.1016/j.conbuildmat.2017.11.002 ↗
23. Fracture properties of hybrid fibre-reinforced roller-compacted concrete in mode I with consideration of possible kinked crack10.1016/j.conbuildmat.2018.07.177 ↗
24. Behaviour of different types of fibre reinforced concrete without admixture10.1016/j.engstruct.2016.01.041 ↗
25. Mechanical properties and durability of high-strength concrete containing macro-polymeric and polypropylene fibres with nano-silica and silica fume10.1016/j.conbuildmat.2016.11.100 ↗
26. Fracture study of concrete composites with synthetic fibers additive under modes I and III using ENDB specimen10.1016/j.conbuildmat.2018.09.149 ↗
27. Performance of lightweight granulated glass concrete beams reinforced with basalt FRP bars10.5267/j.esm.2019.4.004 ↗
28. Evaluating mechanical properties of macro-synthetic fiber-reinforced concrete with various types and contents10.1007/s11223-017-9907-z ↗
29. Multi-scale identification of the elastic properties variability for composite materials through a hybrid optimisation strategy10.1016/j.compositesb.2019.107193 ↗
30. Influence of microencapsulated phase change materials on the flexural behavior and micromechanical impact damage of hybrid fibre reinforced engineered cementitious composites10.1016/j.compositesb.2019.02.059 ↗
31. Influence of fiber mixture on impact response of ultra-high-performance hybrid fiber reinforced cementitious composite10.1016/j.compositesb.2018.12.141 ↗
32. Post-cracking behavior of hybrid fiber-reinforced concrete-filled steel tube beams10.1016/j.conbuildmat.2019.01.192 ↗
33. Behavior of hybrid FRP-concrete-steel multitube hollow columns under axial compression10.1016/j.conbuildmat.2020.119159 ↗
34. Assessment of hybrid FRSC cementitious composite with emphasis on flexural performance of functionally graded slabs10.1016/j.conbuildmat.2020.118904 ↗
35. Hybrid fiber reinforced concrete (HyFRC): fiber synergy in high strength matrices10.1007/BF02480516 ↗
36. The pull-out behavior of straight and hooked-end steel fiber from hybrid fiber reinforced cementitious composite: experimental study and analytical modelling10.1016/j.compstruct.2018.08.066 ↗
37. Performance of a hybrid GFRP-concrete beam subject to low-velocity impacts10.1016/j.compstruct.2018.08.036 ↗
38. Hybrid bio-composites reinforced with sisal-glass fibres and Portland cement particles: a statistical approach10.1016/j.compositesb.2018.05.019 ↗
39. Synergy assessment of hybrid reinforcements in concrete10.1016/j.compositesb.2018.04.020 ↗
40. Effect of mechanical fastening pressure on the bond behaviors of hybrid-bonded FRP to concrete interface10.1016/j.compstruct.2018.08.008 ↗
41. Do polymer fibres affect the distribution of steel fibres in hybrid fibre reinforced concretes?10.1016/j.conbuildmat.2019.116732 ↗
42. Experimental investigation on the flexural behavior of hybrid steel-PVA fiber reinforced concrete containing fly ash and slag powder10.1016/j.conbuildmat.2019.116706 ↗
43. Laboratory investigation on the influence of high compressive strain rates on the hybrid fibre reinforced self-compacting concrete10.1016/j.conbuildmat.2019.116687 ↗
44. Effect of bagasse ash filled epoxy composites reinforced with hybrid plant fibres for mechanical and thermal properties10.1016/j.compositesb.2018.10.038 ↗
45. Flexural behavior of ultra-high performance hybrid fiber reinforced concrete at the ambient and elevated temperature10.1016/j.conbuildmat.2020.118487 ↗
46. Flexural behavior and serviceability of concrete beams hybrid-reinforced with GFRP bars and steel bars10.1016/j.compstruct.2019.111772 ↗
47. Mode I fracture toughness of fibre-reinforced concrete by means of a modified version of the two-parameter model
48. Modified two-parameter fracture model for bone10.1016/j.engfracmech.2016.11.002 ↗
49. Mode I fracture toughness of fibre reinforced concrete10.1016/j.tafmec.2017.03.015 ↗
50. The influence of date palm mesh fibre reinforcement on flexural and fracture behaviour of a cement-based mortar10.1016/j.compositesb.2018.07.017 ↗
51. Size-effect independence of particleboard fracture toughness10.1016/j.compstruct.2019.111374 ↗
52. Two-parameter fracture model for concrete
53. RILEM Technical Committee, 50-FMC, Determination of the fracture energy of mortar and concrete by means of three-point bend test on notched beams, proposed RILEM draft recommendations, Mater. Struct. 18 (1985) 285–290.10.1007/BF02472918 ↗
54. RILEM Technical Committee, 89-FMT, Determination of fracture parameters (KsIC and CTODc) of plain concrete using three-point bend tests, proposed RILEM draft recommendations, Mater. Struct. 23 (1990) 457–460.10.1007/BF02472029 ↗
55. http://www.bekaert.com/ (last accessed 05/02/2020).
56. http://www.fibreistrice.com/ (last accessed 05/02/2020).
57. https://www.ruredil.it/fibre/ (last accessed 05/02/2020).
58. http://www.lamatassina.it/ (last accessed 05/02/2020).
59. ASTM C 1176/C1176M:2013. Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table. American Society for Testing and Materials.
60. ASTM C109/C109M:2001. Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens).
61. Fatigue crack propagation from a crack inclined to the cyclic tensile axis10.1016/0013-7944(74)90007-1 ↗
62. Heterogeneity effects on mixed‐mode I/II stress intensity factors and fracture path of laboratory asphalt mixtures in the shape of SCB specimen10.1111/ffe.13154 ↗
63. Modes I and II stress intensity factors of semi-circular bend specimen computed for two-phase aggregate/mastic asphalt mixtures10.1016/j.tafmec.2019.102437 ↗