journal article·2021-02

Bond behaviour improvement between infra-lightweight and high strength concretes using FRP grid reinforcements and development of bond strength prediction models

Yue Liu, T. Tafsirojjaman, Attiq Ur Rahman Dogar, Alexander Hückler

Publisher page

Abstract

The structural performance of a newly developed lightweight and thermally efficient alternate of normal concrete (NC) i.e. infra-lightweight concrete (ILC) had been under question due to its low elastic modulus, surface roughness, and cracking. In the present study, the structural performance of ILC has been improved by using a layer of high strength concrete (HSC) on each side of the ILC. As the efficiency of the ILC-HSC composite structure depends on the bond between them, therefore, an extensive study has been performed to assess and improve the bond strength in two parts. In the first part, shear (push-out) and tensile (pull-off) bond strength tests have been conducted on ILC-HSC specimens which revealed that the interfacial bond strength is weaker than the weakest material i.e. ILC550. Hence, the bond strength has been improved by carbon and glass fiber-reinforced polymers (CFRPs and GFRPs) with two different grid dimensions i.e. 25 mm and 38 mm in the second part. Test results indicated that both the CFRPs and GFRPs significantly improved the bond strengths and this improvement depends on the reinforcement ratios. Maximum bond strength has been achieved for GFRP-25 reinforced ILCs where shear and tensile bond reinforcement ratios of 0.492% and 0.445% increased the shear and tensile bond strengths by 331% and 456% respectively as compared to un-strengthened specimens. In addition, the comparison of experimental shear bond strengths with five commonly used prediction models revealed the inaccuracy of all the presently available models. Moreover, there is no prediction model available for tensile bond strength prediction. Therefore, two new prediction models have been developed for shear and tensile bond strengths. The comparison of experimental results with developed models has revealed the accuracy and applicability of these models for both the un-strengthened and FRP strengthened ILC-HSC composite structures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Experimental and numerical study on bond strength between conventional concrete and Ultra High-Performance Concrete (UHPC)10.1016/j.engstruct.2019.02.030 ↗
2. Mechanical and permeability properties of the interface between normal concrete substrate and ultra high performance fiber concrete overlay10.1016/j.conbuildmat.2012.06.013 ↗
3. Evaluation of tensile bonding strength between UHTCC repair materials and concrete substrate10.1016/j.conbuildmat.2016.02.149 ↗
4. Enhancing shrinkage properties and bond performance of prefabricated bridge deck connection grouts: material and component testing10.1061/(ASCE)MT.1943-5533.0002235 ↗
5. Interface shear transfer on composite concrete members
6. Design recommendations for interface shear transfer in fib Model Code 201010.1002/suco.201300003 ↗
7. Evaluation of the development of bond strength between two concrete layers10.1088/1757-899X/245/3/032056 ↗
8. Structural behavior of ultra-high performance fiber reinforced concrete-normal strength concrete or high strength concrete composite members10.1016/j.conbuildmat.2015.05.030 ↗
9. An experimental investigation of shear-transfer strength of normal and high strength self compacting concrete10.1016/j.engstruct.2015.11.015 ↗
10. Slant shear bond strength between self compacting concrete and old concrete10.1016/j.conbuildmat.2016.11.023 ↗
11. Correlation between concrete-to-concrete bond strength and the roughness of the substrate surface10.1016/j.conbuildmat.2006.05.044 ↗
12. Bond strength between concrete and repair mortar and its relation with concrete removal techniques and substrate composition10.1016/j.conbuildmat.2019.116900 ↗
13. Bond performance between ultrahigh-performance concrete and normal-strength concrete10.1061/(ASCE)MT.1943-5533.0000890 ↗
14. Geopolymer mortars as sustainable repair material: A comprehensive review10.1016/j.rser.2017.05.076 ↗
15. Feasibility of alkali-activated slag paste as injection material for rehabilitation of concrete structures10.1061/(ASCE)MT.1943-5533.0002400 ↗
16. Interfacial bond properties between normal strength concrete substrate and ultra-high performance concrete as a repair material10.1016/j.conbuildmat.2019.117431 ↗
17. Rehabilitation and strengthening of concrete structures using ultra-high performance fibre reinforced concrete10.2749/101686613X13627347100437 ↗
18. Factors affecting bond between precast concrete and cast in place ultra high performance concrete (UHPC)10.1016/j.engstruct.2020.110746 ↗
19. The bond strength by pull-off and direct tensile strength of concrete damaged by elevated temperatures10.1088/1757-899X/385/1/012047 ↗
20. Are concrete-concrete bond tests comparable?10.1016/j.cemconcomp.2019.02.012 ↗
21. Bonding behavior between reactive powder concrete and normal strength concrete10.1016/j.conbuildmat.2020.118024 ↗
22. Structural Behavior of Reinforced Infra-Lightweight Concrete (ILC)10.14359/51712273 ↗
23. BS-EN-206, Concrete-Specification, performance, production and conformity, 2014.
24. Schlaich · Infraleichtbeton · 2012 · 2
25. C. Lösch, P. Rieseberg, Infraleichtbeton: Entwurf, Konstruktion, Bau, in: M. Schlaich, R. Leibinger (Eds.), Fraunhofer IRB Verlag, 2018.10.51202/9783816799313 ↗
26. Infraleichtbeton: Reif für die Praxis10.1002/best.201700046 ↗
27. Shrinkage behavior enhancement of infra-lightweight concrete through FRP grid reinforcement and development of their shrinkage prediction models10.1016/j.conbuildmat.2020.119649 ↗
28. External prestressed carbon fiber-reinforced polymer straps for shear enhancement of concrete10.1061/(ASCE)1090-0268(2002)6:4(249) ↗
29. L. Dvorkin, O. Dvorkin, Basics of Concrete Science, St. Petersburg (Russia), 2006.
30. Numerical investigation of CFRP strengthened RHS members under cyclic loading10.1016/j.istruc.2020.01.041 ↗
31. Seismic strengthening of rigid steel frame with CFRP10.1016/j.acme.2018.08.007 ↗
32. Thambiratnam, enhancement of seismic performance of steel frame through CFRP strengthening
33. Behaviour of CFRP strengthened CHS members under monotonic and cyclic loading10.1016/j.compstruct.2019.04.029 ↗
34. BS-EN-1992-1-1:2004, Eurocode 2, Design of concrete structures-Part 1-1: General rules and rules for buildings, (2004).
35. American Concrete Institute, 318M–08: Building Code Requirements for Reinforced Concrete and Commentary, (2008) 473.
36. Aashto · 2012
37. Canadian Standards Association · 2004
38. Australia Standards, AS 3600-2018: Concrete Structures, (2018).
39. British Standards Institution, BS EN 12390-7:2000 Part 7: Density of hardened concrete, 2000.
40. European Committee for Standardization (CEN), BS EN 206-1:2000 Concrete - Part 1: Specification, performance and conformity, 2000.
41. BS-EN-20, 12390-3: 2009, Test. Hardened Concr. Compressive Strength Test Specimens. (2009) 12390–12395.
42. Mörsch · 1909
43. BS-EN-12390-13, Testing hardened concrete–Part 13: determination of secant modulus of elasticity in compression, Br. Stand. Inst. London, UK. (2013).
44. B.S. EN, BS EN 12667: 2001, Br. Stand. Inst. London, UK. (2001).
45. Cement Composition, Specifications and Conformity Criteria for Common Cements, in: BS EN 197-1, 2011: pp. 191–197.
46. ACI Committee 363, Report on High-Strength Concrete (ACI 363R-10), ACI, 2010.
47. BS-EN-1992-1-2, Eurocode 2: Design of Concrete Structures-Part 1-2: General Rules–Structural Fire Design, (2004).
48. Evaluation of the adhesion resistance between steel and concrete by push out test10.1016/j.ijadhadh.2010.11.004 ↗
49. European Standards, BS-EN 12090:2013 Thermal insulating products for building applications–Determination of shear behaviour, 2013.
50. FIB, Model Code 2010, 2011. https://doi.org/10.1002/9783433604090.ch6.10.1002/9783433604090.ch6 ↗
51. European Committee for Standardization (CEN), EN 1015-12: Methods of test for mortar for masonry–Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates, (2016).