Effect of property deterioration in SBS modified binders during storage on the performance of asphalt mix
Source abstract
Abstract
Abstract SBS modified binders (SBS-MBs) are vulnerable to property erosion during storage and transportation in closed containers at temperatures exceeding 160 °C. If proper precautionary measures are not taken, the quality of pavements may also be affected. This investigation is focused on determining the effect of property deterioration in SBS-MBs during storage in closed metal containers on the performance of the asphalt mixture. In the first phase, optimum SBS content was determined based on binder and mixture studies. In the second part, studies were carried out comparing the performance of asphalt mixes prepared using fresh (0 days stored) and stored SBS-MBs at 150 °C and 180 °C for 14 days in closed metal containers. The asphalt mix performance was assessed through Marshall stability, rut depth, and fatigue tests. The results show that the properties of the SBS-MB remained stable during storage at 150 °C, and the performance of the asphalt mixes prepared using such SBS-MBs remained intact. On the contrary, during storage at 180 °C, significant erosion in the properties of the SBS-MBs with 4.5 wt% SBS content (optimum dosage) was observed. Gel permeation chromatography (GPC) results clearly showed chain scission of SBS polymer due to the non-oxidative thermal degradation. It can be concluded that the decline in the performance of the asphalt mix prepared using 4.5 wt% SBS-MB stored at 180 °C was substantial (50–100%). The Marshall stability value of the mixes decreased by up to 30% and rut depth increased by almost 50% when the asphalt mix was prepared using SBS-MB stored at 180 °C for 7 days. Such a massive reduction in the performance of asphalt mixes will severely impact the overall life and stability of the pavements, and contribute to its premature failure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Modification of road bitumens with thermoplastic polymers10.1016/S0142-9418(00)00004-0 ↗
2. Rheological properties of styrene butadiene styrene polymer modified road bitumens⋆10.1016/S0016-2361(03)00146-7 ↗
3. Effect of styrene-butadiene-styrene on the properties of asphalt and stone-matrix-asphalt mixture10.1061/(ASCE)MT.1943-5533.0000185 ↗
4. Chemical and rheological evaluation of aging properties of SBS polymer modified bitumens10.1016/S0016-2361(97)00283-4 ↗
5. Comparative analysis, road performance, and mechanism of modification of polystyrene graphene nanoplatelets (PS-GNPs) and octadecyl amine graphene nanoplatelets modified SBS incorporated asphalt binders10.1016/j.conbuildmat.2018.10.210 ↗
6. Application of rheological characteristics of modified bitumen to predict the fatigue life of asphalt mixtures10.1080/10916466.2013.773039 ↗
7. Phase morphology of polymer modified road asphalt10.1081/LFT-200043780 ↗
8. Evaluation of the properties of bitumen modified by SBS copolymers with different styrene-butadiene structure10.1002/app.40398 ↗
9. Determination of polymer content in modified bitumen10.1007/BF02483278 ↗
10. Rheological and Rutting Characterization of Asphalt Mixes with Modified Binders
11. Comparative study of the effect of sulfur on the morphology and rheological properties of SB- and SBS-modified asphalt10.1002/app.31407 ↗
12. Investigation of rutting performance of asphalt mixtures containing polymer modifiers10.1016/j.conbuildmat.2005.08.014 ↗
13. The effects of using lime and styrene–butadiene–styrene on moisture sensitivity resistance of hot mix asphalt10.1016/j.conbuildmat.2008.08.019 ↗
14. Predicting stripping and moisture induced damage of asphalt concrete prepared with polymer modified bitumen and hydrated lime10.1016/j.conbuildmat.2008.12.001 ↗
15. Effect of styrene–butadiene–styrene block copolymer on fatigue crack propagation behavior of asphalt concrete mixtures
16. Styrene butadiene styrene polymer modification of road bitumens10.1023/B:JMSC.0000012927.00747.83 ↗
17. Relationship between fractal, viscoelastic, and aging properties of linear and radial styrene–butadiene–styrene polymer-modified bitumen
18. Rheological, chemical and aging characteristics of high content polymer modified asphalt10.1016/j.conbuildmat.2019.02.086 ↗
19. Impact of the molecular structure of SBS on thermo-mechanical properties of polymer modified bitumen10.1016/j.eurpolymj.2017.09.017 ↗
20. Rheological characterization of styrene-butadiene-styrene copolymer modified bitumens10.1016/S0950-0618(96)00033-5 ↗
21. Paving asphalt polymer blends: relationship between composition, structure and properties
22. Testing and appraisal of polymer modified road bitumens—state of the art10.1007/BF02473221 ↗
23. Georgia DOT Chooses Highly Modified Asphalt for Busy Intersection
24. D.H. Timm et al., Field and Laboratory Study of High-Polymer Mixtures at the NCAT Test Track, Interim Report, Report No. 12-08, National Center for Asphalt Technology, Auburn University (2012).
25. J. Greene, S. Chun, B. Choubane, Evaluation and Implementation of a Heavy Polymer Modified Asphalt Binder Through Accelerated Pavement Testing, Florida Department of Transportation, State Materials Office, Research Report Number FL/DOT/SMO/14-564, (2014).
26. Compatibility and storage stability of styrene-butadiene-styrene copolymer modified bitumens10.1007/BF02486904 ↗
27. Thermo-rheological behavior and compatibility of modified asphalt with various styrene–butadiene structures in SBS copolymers10.1016/j.matdes.2015.09.002 ↗
28. Effect of polymer modification on the ageing properties of asphalt binders: Chemical and morphological investigation10.1016/j.conbuildmat.2019.02.050 ↗
29. Studies on the thermal degradation of polybutadiene10.1016/S0378-3820(00)00073-4 ↗
30. A study on thermal oxidation mechanism of styrene–butadiene–styrene block copolymer (SBS)10.1016/j.polymdegradstab.2007.06.008 ↗
31. Thermal degradation of polystyrene, poly(1,4-butadiene) and copolymers of styrene and 1,4-butadiene irradiated under air or argon with 60Co-γ-rays10.1016/S0141-3910(98)00114-1 ↗
32. Use of Fourier transform infrared spectroscopy to study ageing characteristics of asphalt binders10.1080/10916466.2017.1350710 ↗
33. Effect of short-term aging on creep and recovery response of asphalt binders, Journal of Transportation Engineering
34. Rheological and chemical evaluation on the ageing properties of SBS polymer-modified bitumen: from the laboratory to the field10.1016/j.conbuildmat.2013.10.043 ↗
35. Thermal oxidative aging characterization of SBS modified Asphalt10.1007/s11595-013-0646-0 ↗
36. Rheological characteristics investigation of high percentage RAP binders with WMA technology at various aging states10.1016/j.conbuildmat.2015.08.114 ↗
37. Critical matters in using Attenuated Total Reflectance Fourier Transform Infrared to characterize the polymer degradation in Styrene–Butadiene–Styrene-modified asphalt binders10.1016/j.polymertesting.2018.07.019 ↗
38. Laboratory evaluation of rejuvenation effect of reactive rejuvenator on aged SBS modified bitumen10.1617/s11527-017-1106-7 ↗
39. Investigation of thermal degradation of asphalt binders during storage and transportation10.1016/j.conbuildmat.2019.117196 ↗
40. Thermal degradation of SBS in asphalt binder during storage: Influence of temperature, SBS concentration, polymer type, and base asphalt binder10.1016/j.polymdegradstab.2017.11.008 ↗
41. Heatec: An Astec Company: TN, USA.
42. TEC container solutions: West Sussex, United Kingdom.
43. A.Remtulla,et al. The Effect of Prolonged Hot Storage of the Elastomeric PMBs on the Rutting and Fatigue Properties of Hot Mix Asphalt (2009) AAPA international flexible pavements conference, 13th
44. Code of practice Manufacture, storage, and handling of polymer modified binders AAPA(2004) 1st edition, June.
45. AAPA Advisory Note 7: Guide to the Heating and Storage of Binders for Sprayed Sealing and Hot Mixed Asphalt.
46. Guide to the Manufacture, Storage, and Handling of polymer modified binders AAPA(2013).
47. L.C. Matrix, D. Maximum, S. Handling, S. Practice, Loading, Storage and Handling Temperature, eurobitume, technical guide. Feb (2013) 1–2.
48. V. Wegan, C.B. Nielsen, Microstructure of polymer modified binders in bituminous mixtures, Hedehusene, Denmark: Danish Road Institute, Report 109 (2001)
49. J. Oliver, Ensuring the Quality of SBS Modified Binders, 25th ARRB Conference, Perth Australia (2012)
50. I. Dragon et al., 3rd Eurasphalt and Eurobitume Congress (2004).
51. Austroads Technical Report: Investigations into the effects of polymer segregation and degradation in polymer modified binders, Sydney NSW, Australia, AP-T227 (2013)
52. J. May et al., Heating, Mixing and Storing Modified Asphalt, Technical Paper T133, Heatec, Inc (1996).
53. U. Johansson, S. Lindle, Polymer modified asphalt binders: part 1, report 1991:02, Swedish National Testing and Research Institute, Boras, Sweden.
54. W. Vonk, R. Hartemink, Proceedings of the 8th Conference on Asphalt Pavements for Southern Africa (CAPSA'04), (2004), ISBN Number: 1920017186.
55. Robert et al., Effects of hot storage on polymer modified binder properties and field performance, 6th Eurasphalt & Eurobitume Congress, Prague, Czech Republic, 2016
56. Effect of cross-linking agents on the rheological properties of polymer-modified bitumen10.1080/14680629.2015.1029683 ↗
57. Effect of aging on rheological properties of storage-stable SBS/sulfur-modified asphalts10.1016/j.jhazmat.2010.06.061 ↗
58. MORTH, Specifications for Road and Bridge Work, Ministry of Road Transport and Highway, New Delhi, India, 2013.
59. ASTM D6927, Standard test method for Marshall stability and flow of asphalt mixtures, 2015.
60. Asphalt Institute, MS-2 Asphalt Mix Design Methods, Asphalt Institute, 2014.
61. ASTM D1075, Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures, 2011.
62. AASHTO T324, Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Hot-Mix Asphalt (HMA) American Association of State Highway and Transportation Officials, 2004.
63. ASTM D 7460, Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending, 2010.
64. Analysis of the impact of the type and content of SBS on the performance of the modified asphalt mixture10.4028/www.scientific.net/AMR.919-921.1079 ↗
65. AASHTO M 322, Standard specification for Performance-Graded Asphalt Binder Using Multiple Stress Creep Recovery (MSCR) Test, American Association of State Highway and Transportation Officials, 2014.
66. Yogesh et al., Effect of molecular structure and concentration of styrene-butadiene polymer on upper service temperature rheological properties of modified binders, 249 (2020) 118790.10.1016/j.conbuildmat.2020.118790 ↗
67. Morphology and image analysis of polymer modified bitumens10.1016/j.conbuildmat.2008.08.020 ↗
68. Morphology, rheology, and physical properties of polymer-modified asphalt binders10.1016/j.eurpolymj.2018.10.049 ↗
69. Protocol for the morphology analysis of SBS polymer modified bitumen images obtained by using fluorescent microscopy10.1080/10298436.2017.1316647 ↗
70. Application of FTIR spectroscopy with solvent-cast film and PLS regression for the quantification of SBS content in modified asphalt10.1080/10298436.2017.1413242 ↗
71. Molecular characterization of styrene-butadiene-styrene block copolymers (SBS) by GPC, NMR, and FTIR10.1007/s00289-006-0577-4 ↗
72. Rapid FTIR method for quantification of styrene-butadiene type copolymers in bitumen10.1002/1097-4628(20010207)79:6<1034::AID-APP60>3.0.CO;2-4 ↗
73. Effect of the thermal degradation of SBS copolymers during the ageing of modified asphalts10.1016/j.polymdegradstab.2004.05.006 ↗
74. Significance of frequency in quantifying the deterioration in the properties of SBS modified binders and rutting performance10.1016/j.conbuildmat.2020.120872 ↗