journal article·2021-04

Systematic evaluation of the aggregate types and properties on metakaolin based geopolymer composites

Furkan Şahin, Mucteba Uysal, Orhan Canpolat

Publisher page

Abstract

Abstract Although aggregates constitute the largest volume in geopolymer composites, there are limited studies related to this parameter. This study investigates the effect of different types of aggregates on the mechanical and durability properties of metakaolin (MK) based geopolymer composites. For this study, while using metakaolin as the main raw material, slag (S) was used to gain an early setting. Six different sand types (silica sand, river sand, sandstone, Rilem sand, waste concrete aggregate, and basalt sand) were used in the geopolymer mortar. The ultrasonic pulse velocity (UPV) and flexural and compressive strength results of 7, 28, and 56 days were found to examine the effect of aggregates, while the unit weight, voids ratio, water absorption, and workability properties of the samples were also investigated. XRD analyzes were performed for the crystalline materials’ structure. After 56 days, the samples were exposed to 180 cycles of the freezing-thawing test (1 cycle consists of 12 h at −18 °C and 12 h at +4 °C) and high temperatures of 200, 400, 600, and 800 °C. After the tests, UPV and strength results were found and weight changes were also examined. Also, an abrasion test was applied. SEM analyzes were carried out pre and post the high-temperature test. Test results have shown that basalt sand added samples produced better results due to their more dense and compact structure compared to other aggregates. Similarly, high results were obtained by using silica sand and sandstone. In the case of using waste concrete aggregate, it was seen that acceptable results were obtained in terms of structural features.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. Influence of raw materials and potassium and silicon concentrations on the formation of a zeolite phase in a geopolymer network during thermal treatment10.1016/j.jnoncrysol.2012.05.043 ↗
2. Synthesis and mechanical properties of metakaolinite-based geopolymer10.1016/j.colsurfa.2005.01.016 ↗
3. Tchakoute Kouamo · Constr. Build. Mater. · 2012 · 35 · 96010.1016/j.conbuildmat.2012.04.023 ↗
4. Effect of using colemanite waste and silica fume as partial replacement on the performance of metakaolin-based geopolymer mortars10.1016/j.conbuildmat.2018.05.034 ↗
5. Beneficial use of recycled materials in concrete mixtures10.1016/j.conbuildmat.2011.10.024 ↗
6. Environmental assessment of green concretes for structural use10.1016/j.jclepro.2017.04.015 ↗
7. Sustainable management and supply of natural and recycled aggregates in a medium-size integrated plant10.1016/j.wasman.2016.01.013 ↗
8. Definition of an equivalent functional unit for structural concrete incorporating recycled aggregates10.1016/j.engstruct.2016.04.055 ↗
9. Rheological and mechanical behavior of concrete made with pre-saturated and dried recycled concrete aggregates10.1016/j.conbuildmat.2016.06.107 ↗
10. Influence of the amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete10.1016/j.cemconres.2007.02.002 ↗
11. Performance of concrete made with commercially produced coarse recycled concrete aggregate10.1016/S0008-8846(00)00476-2 ↗
12. Influence of recycled concrete aggregates on strength properties of concrete10.1016/j.conbuildmat.2008.06.007 ↗
13. Comparative environmental assessment of natural and recycled aggregate concrete10.1016/j.wasman.2010.04.012 ↗
14. Study on the influence of attached mortar content on the properties of recycled concrete aggregate10.1016/j.conbuildmat.2008.04.012 ↗
15. Mechanical and durability properties of concrete using contaminated recycled aggregates10.1016/j.cemconcomp.2010.03.004 ↗
16. Microstructural analysis of recycled aggregate concrete produced from two-stage mixing approach10.1016/j.cemconres.2004.10.025 ↗
17. Effects of the parent concrete properties and crushing procedure on the properties of coarse recycled concrete aggregates10.1061/(ASCE)MT.1943-5533.0000789 ↗
18. A computational method for selection of optimal concrete recycling strategy10.1680/macr.14.00211 ↗
19. Alkali release from feldspars into pore solutions10.1016/S0008-8846(02)01001-3 ↗
20. The use of basalt aggregates in concrete mixes in Jordan
21. Effect of mineral admixtures on properties of self-compacting concrete10.1016/j.cemconcomp.2011.04.005 ↗
22. Investigating the influence of basalt as mineral admixture on hydration and microstructure formation mechanism of cement10.1016/j.conbuildmat.2013.07.021 ↗
23. Study the pozzolanic activity of fresh basalt
24. H. Maiah, G. Al-Khateeb, Effect of basalt and limestone aggregate combinations on Superpave aggregate properties, The 5th Jordanian International Civil Engineering Conference, At Amman, Jordan.
25. An investigation on the usefulness of extracted-dolomite-silica fine in concretes
26. Performance of normal concrete with eco sand (Finely Graded Silica) as fine aggregate
27. Shrinkage of concrete containing graywacke sandstone aggregate
28. The effects of different sandstone aggregates on concrete strength10.1016/j.conbuildmat.2012.04.014 ↗
29. I-sand: an environment friendly alternative to river sand in Reinforced Cement Concrete constructions10.1016/j.conbuildmat.2016.08.130 ↗
30. Development of metakaolin-fly ash based geopolymers for fire resistance applications10.1016/j.conbuildmat.2014.01.040 ↗
31. Compressive strength and microstructure of fly ash based geopolymer blended with silica fume under thermal cycle10.1016/j.cemconcomp.2017.01.009 ↗
32. High-temperature behavior and mechanical characteristics of boron waste additive metakaolin based geopolymer composites reinforced with synthetic fibers10.1016/j.conbuildmat.2018.08.062 ↗
33. Freeze-thaw resistance of alkali-slag concrete based on response surface methodology10.1016/j.conbuildmat.2013.07.045 ↗
34. Impact properties of geopolymer based extrudates incorporated with fly ash and PVA short fiber10.1016/j.conbuildmat.2006.08.006 ↗
35. Y. Aygörmez, O. Canpolat, M. Uysal, M.M. Al-mashhadani, Compressive and flexural strength behaviors of metakaolin based geopolymer mortars manufactured by different procedures, in: 4th International Conference on Green Design and Manufacture IConGDM 2030 (2018).10.1063/1.5066927 ↗
36. ASTM C109/109M, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) 1. Chemical Analysis, (C109/C109M – 11b), (2010) pp. 1–9.
37. ASTM C348, Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars ASTM C348. Annual Book of ASTM Standards, 4, (1998) pp. 2–7.
38. European Standard, EN 1338, Concrete paving blocks – requirements and test, methods (2003).
39. Effect of crushed ceramic and basaltic pumice as fine aggregates on concrete mortars properties10.1016/j.conbuildmat.2006.06.002 ↗
40. Durability of concrete made with natural granular granite, silica sand and powders of waste marble and basalt as fine aggregate10.1016/j.jobe.2018.04.022 ↗
41. Experimental study on the use of basalt aggregate in concrete mixes10.14445/23488352/IJCE-V2I4P107 ↗
42. Mechanical properties of geopolymer mortars in relation to their porous structure
43. Effects of aggregates on the mechanical properties and microstructure of geothermal metakaolin-based geopolymers10.1016/j.rinp.2018.09.018 ↗
44. Sandstone wastes as aggregate and its usefulness in cement concrete–a comprehensive review10.1016/j.rser.2017.08.044 ↗
45. Effect of partial and total replacement of siliceous river sand with limestone crushed sand on the durability of mortars exposed to chemical solutions10.1016/j.conbuildmat.2013.05.037 ↗
46. Investigating the mechanical property and reaction mechanism of geopolymers cement with red Pisha Sandstone10.1016/j.conbuildmat.2018.12.202 ↗
47. Influence of recycled aggregate on fly ash geopolymer concrete properties10.1016/j.jclepro.2015.10.109 ↗
48. Mechanical properties of concrete with recycled coarse aggregate10.1016/j.buildenv.2005.07.033 ↗
49. Alkali-activated fly ash/slag cements: Strength behaviour and hydration products10.1016/S0008-8846(00)00298-2 ↗
50. One year geopolymerisation of sodium silicate activated fly ash and metakaolin geopolymers10.1016/j.cemconcomp.2018.10.014 ↗
51. Strength development in clay–fly ash geopolymer10.1016/j.conbuildmat.2012.11.015 ↗
52. A survey on one year strength performance of reinforced geopolymer composites10.1016/j.conbuildmat.2020.120267 ↗
53. Evaluation of the 12–24 mm basalt fibers and boron waste on reinforced metakaolin-based geopolymer10.1016/j.conbuildmat.2020.118976 ↗
54. Elevated temperature, freezing-thawing and wetting-drying effects on polypropylene fiber reinforced metakaolin based geopolymer composites10.1016/j.conbuildmat.2019.117502 ↗
55. A laboratory investigation of steel to fly ash-based geopolymer paste bonding behavior after exposure to elevated temperatures10.1016/j.conbuildmat.2020.119267 ↗
56. Comparative thermal and mechanical performance of geopolymers derived from metakaolin and fly ash10.1061/(ASCE)MT.1943-5533.0001359 ↗
57. The Influence of Silica Fume on the Mechanical and Thermal Parameters of Portland Cement Concretes10.12911/22998993/112503 ↗
58. Influence of rice husk ash on mechanical properties and fire resistance of recycled aggregate high-calcium fly ash geopolymer concrete10.1016/j.jclepro.2019.119797 ↗
59. Properties of reinforced concrete steel rebars exposed to high temperatures
60. Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperatures10.1016/j.cemconres.2007.08.021 ↗
61. The effect of organic and inorganic fibres on the mechanical and thermal properties of aluminate activated geopolymers10.1016/j.compositesb.2015.02.023 ↗
62. Effects of high-temperature heat treatment on the mechanical properties of unidirectional carbon fiber reinforced geopolymer composites10.1016/j.ceramint.2010.02.012 ↗
63. Mechanical and durable behaviour of alkaline cement mortars reinforced with polypropylene fibres10.1016/S0008-8846(03)00222-9 ↗
64. Development, properties, and production of geopolymers based on secondary raw materials
65. Chemical and freeze-thaw resistance of fly ash-based inorganic mortars10.1016/j.fuel.2013.04.070 ↗
66. Influence of wetting-drying curing system on the performance of fiber reinforced metakaolin-based geopolymer composites10.1016/j.conbuildmat.2019.07.235 ↗
67. Assessment of geopolymer composites durability at one year age10.1016/j.jobe.2020.101453 ↗