journal article·2021-04

Study on the feasibility of using iron ore tailing (iot) on technological properties of concrete roof tiles

Tony Matheus Carvalho Eugênio, Jefferson Francisco Fagundes, Queilla Santos Viana, Alan Pereira Vilela, Rafael Farinassi Mendes

Publisher page

Abstract

Abstract The mining industry produces large amounts of waste during the iron ore processing. This material is usually discarded into tailing dams, posing high maintenance and monitoring costs as well as causing serious environmental disruptions, such as air contamination and leaching of substances. The reuse of such waste as alternative materials in the construction industry is an alternative to its disposal. Therefore, this study aimed at evaluating the effect of using iron ore tailing (IOT) on the physical, mechanical, thermal and durability properties of concrete roof tiles obtained by the extrusion process. The base trace in mass consisted of 1 : 3 : 0.56 (cement : medium grade natural sand : limestone powder). The treatments were based on 25, 50, 75, and 100% mass replacement of limestone powder by iron ore tailing. After shaping, the concrete roof tiles were taken to a saturated humidity chamber at room temperature for 28 days. Concrete roof tiles were evaluated for water absorption, dry weight, transverse breaking strength, bulk density, apparent porosity properties and microstructure at 28 curing days and after accelerated aging. Thermal conductivity, wettability, XRD, permeability and impact resistance analyses of roof tiles were also performed. There were significant transverse breaking strength and porosity values improvements as a result of using greater amount of IOT compared to traditional concrete roof tiles. The technological properties were improved by increasing the amount of waste, meeting international marketing standards. The use of iron ore tailing as total LP replacement showed great potential for use as raw material for concrete roof tiles production, allowing the correct disposal and development of new, more sustainable products, as well as the improvement of roof tiles physical and mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Tailings Management and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Incorporation of metagabbro as cement replacement in cement-based materials: A role of mafic minerals on the physico-mechanical and durability properties10.1016/j.conbuildmat.2019.03.191 ↗
2. Effect of mineral additions on the microstructure and properties of blended cement matrices for fibre-cement applications10.1016/j.cemconcomp.2019.02.001 ↗
3. Evaluation of the pozzolanic activity of red ceramic waste using mechanical and physicochemical methods10.1590/0366-69132019653752649 ↗
4. Durability analysis of pozzolanic cements containing recycled track ballast: Sustainability under extreme environmental conditions10.1016/j.conbuildmat.2020.117999 ↗
5. The potential to reduce the risks posed by tailings dams using satellite-based information10.1016/j.ijdrr.2019.101209 ↗
6. L.A. de C. Bastos, G.C. Silva, J.C. Mendes, R.A.F. Peixoto, Using Iron Ore Tailings from Tailing Dams as Road Material, J. Mater. Civ. Eng. 28 (2016) 04016102. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001613.10.1061/(ASCE)MT.1943-5533.0001613 ↗
7. J.R. Owen, D. Kemp, Lèbre, K. Svobodova, G. Pérez Murillo, Catastrophic tailings dam failures and disaster risk disclosure, Int. J. Disaster Risk Reduct. 42 (2020). https://doi.org/10.1016/j.ijdrr.2019.101361.10.1016/j.ijdrr.2019.101361 ↗
8. Severe impacts of the Brumadinho dam failure (Minas Gerais, Brazil) on the water quality of the Paraopeba River10.1016/j.scitotenv.2019.135914 ↗
9. R.B. Davila, M.P.F. Fontes, A.A. Pacheco, M. da S. Ferreira, Heavy metals in iron ore tailings and floodplain soils affected by the Samarco dam collapse in Brazil, Sci. Total Environ. 709 (2020). https://doi.org/10.1016/j.scitotenv.2019.136151.10.1016/j.scitotenv.2019.136151 ↗
10. Accounting for tailings dam failures in the valuation of mining projects10.1016/j.resourpol.2019.101461 ↗
11. S. Figueirôa, Mining in Brazil, in: Encycl. Hist. Sci. Technol. Med. Non-Western Cult., Springer Netherlands, Dordrecht, 2014: pp. 1–5. https://doi.org/10.1007/978-94-007-3934-5_9975-1.10.1007/978-94-007-3934-5_9975-1 ↗
12. Evaluation of iron ore tailings as replacement for fine aggregate in concrete10.1016/j.conbuildmat.2016.05.095 ↗
13. Mortars for laying and coating produced with iron ore tailings from tailing dams10.1016/j.conbuildmat.2016.03.027 ↗
14. Utilization of Iron Ore Tailings as Raw Material for Portland Cement Clinker Production
15. Fresh properties, compressive strength and microstructure of fly ash geopolymer paste blended with iron ore tailing under thermal cycle10.1016/j.conbuildmat.2016.05.059 ↗
16. Activation of hydration properties of iron ore tailings and their application as supplementary cementitious materials in cement10.1016/j.powtec.2019.11.002 ↗
17. Assessment of the use potential of iron ore tailings in the manufacture of ceramic tiles: From tailings-dams to “brown porcelain”10.1016/j.conbuildmat.2019.02.052 ↗
18. B.C. Mendes, L.G. Pedroti, M.P.F. Fontes, J.C.L. Ribeiro, C.M.F. Vieira, A.A. Pacheco, A.R.G. d. Azevedo, Technical and environmental assessment of the incorporation of iron ore tailings in construction clay bricks, Constr. Build. Mater. 227 (2019) 116669. https://doi.org/10.1016/j.conbuildmat.2019.08.050.10.1016/j.conbuildmat.2019.08.050 ↗
19. B.C. Mendes, L.G. Pedroti, R. de C.S.S. Alvarenga, M.P.F. Fontes, P.C. Drumond, A.A. Pacheco, M.M.S. Lopes, A.R.G. de Azevedo, Effect of the incorporation of iron ore tailings on the properties of clay bricks, in: Miner. Met. Mater. Ser., Springer International Publishing, 2019: pp. 617–627. https://doi.org/10.1007/978-3-030-05749-7_61.10.1007/978-3-030-05749-7_61 ↗
20. Mechanical activation as an innovative approach for the preparation of pozzolan from iron ore tailings10.1016/j.mineng.2019.106068 ↗
21. Preparation and characterization of Portland cement clinker from iron ore tailings10.1016/j.conbuildmat.2018.11.236 ↗
22. Lowering Emissivity of Concrete Roof Tile’s Underside Cuts Down Heat Entry to the
23. Mechanical characterization of concrete roof tiles
24. V.P. Souza, R. Toledo, J.N.F. Holanda, H. Vargas, R.T.F. Jr., Pollutant gas analysis evolved during firing of red ceramic incorporated with water treatment plant sludge, Cerâmica. 54 (2008) 351–355. http://www.scielo.br/pdf/ce/v54n331/a1354331.pdf (accessed January 31, 2020).10.1590/S0366-69132008000300013 ↗
25. BRAZILIAN ASSOCIATION OF TECHNICAL STANDARDS, NBR NM 248 - Aggregates - Sieve analysis of fine and coarse aggregates, Rio de Janeiro, 2003.
26. BRAZILIAN ASSOCIATION OF TECHNICAL STANDARDS, NBR 7211: Concrete aggregates - Specification, 2019.
27. BRAZILIAN ASSOCIATION OF TECHNICAL STANDARDS, NBR 13858-2: Concrete tiles: part 2: requirements and test. methods, 2009.
28. U. ASTM International, West Conshohocken, PA, ASTM C1492-03 - Standard Specification for Concrete Roof Tiles, 2009.
29. BRAZILIAN ASSOCIATION OF TECHNICAL STANDARDS, NBR 13554:2012: Soil-cement — Wet and dry durability test — Methods, 2012.
30. U. ASTM International, West Conshohocken, PA, ASTM C140/C140M-20: Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units, 2014.
31. AMERICAN SOCIETY FOR TESTING AND, ASTM C 948: test method for dry and wet bulk density, water absorption, and apparent porosity of thin sections of glass-fiber reinforced concrete, 2001.
32. BRAZILIAN ASSOCIATION OF TECHNICAL STANDARDS, NBR 15575-5 - Residential buildings — Performance - Part 5: Requirements for roofi ng systems, 2013.
33. BRAZILIAN ASSOCIATION OF TECHNICAL STANDARDS, NBR ISO 10545-5 - Ceramic tiles Part 5: Determination of impact resistance by measurement of coefficient of restitution, 2017.
34. Deterministic solutions for contact force generated by impact of windborne debris10.1016/j.ijimpeng.2016.01.002 ↗
35. Experimental investigation of high velocity ice impacts on woven carbon/epoxy composite panels10.1016/S1359-835X(02)00258-0 ↗
36. On the response of two commercially-important CFRP structures to multiple ice impacts10.1016/j.compstruct.2011.04.029 ↗
37. U. ASTM International, West Conshohocken, PA, ASTM D 724: Standard Test Method for Surface Wettability of Paper (Angle-of-Contact Method, 1999.
38. Changes in color and thermal properties of fly ash cement mortar after heat treatment10.1016/j.conbuildmat.2018.01.029 ↗
39. T.M.C. Eugênio, PHYSICAL, MECHANICAL AND THERMAL PROPERTIES OF MORTAR COATING WITH THE USE OF TIRE WASTE, Federal University of Lavras, 2016.
40. B.C.B. CENTER BANK OF BRAZIL, US Dollar to Brazilian Real exchange rate, (2020). https://www.bcb.gov.br/estabilidadefinanceira/fechamentodolar (accessed December 12, 2020).
41. Sisvar: a computer statistical analysis system10.1590/S1413-70542011000600001 ↗
42. Eco-friendly mortars with addition of ornamental stone waste - A mathematical model approach for granulometric optimization10.1016/j.jclepro.2019.119283 ↗
43. Physical and mechanical properties of foam concretes containing granulated blast furnace slag as fine aggregate10.1016/j.conbuildmat.2019.117774 ↗
44. The use of iron ore tailings obtained from the Germano dam in the production of a sustainable concrete
45. C.D. Prates, F.C. Ballotin, H. Limborço, J.D. Ardisson, R.M. Lago, A.P. de C. Teixeira, Heterogeneous acid catalyst based on sulfated iron ore tailings for oleic acid esterification, Appl. Catal. A Gen. 600 (2020) 117624. https://doi.org/10.1016/j.apcata.2020.117624.10.1016/j.apcata.2020.117624 ↗
46. A.P. Vilela, T.M.C. Eugênio, F.F. de Oliveira, J.F. Mendes, A.G.C. Ribeiro, L.E.V. de S. Brandão Vaz, R.F. Mendes, Technological properties of soil-cement bricks produced with iron ore mining waste, Constr. Build. Mater. 262 (2020) 120883. https://doi.org/10.1016/j.conbuildmat.2020.120883.10.1016/j.conbuildmat.2020.120883 ↗
47. Pozzolanic activity of mineral additions to Portland cement (Part I): Pozzolanic activity index with lime (PAI), X-ray diffraction (XRD), thermogravimetry (TG/DTG) and modified Chapelle
48. Analysis of potential pozzolanic ash from rice husk (CCA) using the technique of Rietveld refinement
49. The effects of phase changes on the bonding property of geopolymer to hydrated cement10.1016/j.conbuildmat.2013.06.095 ↗
50. M. Aminul Haque, B. Chen, Y. Liu, S. Farasat Ali Shah, M.R. Ahmad, Improvement of physico-mechanical and microstructural properties of magnesium phosphate cement composites comprising with Phosphogypsum, J. Clean. Prod. 261 (2020) 121268. https://doi.org/10.1016/j.jclepro.2020.121268.10.1016/j.jclepro.2020.121268 ↗
51. Physico-mechanical properties of composite cement pastes containing silica fume and fly ash10.1016/j.hbrcj.2014.02.003 ↗
52. Effect of accelerated carbonation curing on near surface properties of concrete
53. Management of sanitary ware wastes as supplementary cementing materials in concretes
54. M. Aminul Haque, R.A. Chowdhury, S. Islam, M. Foridul Islam, H. Rahman, Evaluating the conventional mixing grades of demolished tiles aggregate concrete and mortar for sustainable use, J. Clean. Prod. 213 (2019) 1414–1427. https://doi.org/10.1016/j.jclepro.2018.12.202.10.1016/j.jclepro.2018.12.202 ↗
55. Effect of accelerated carbonation on cementitious roofing tiles reinforced with lignocellulosic fibre10.1016/j.conbuildmat.2007.11.018 ↗
56. Water absorption in rubber-cement composites: 3D structure investigation by X-ray computed-tomography10.1016/j.conbuildmat.2019.07.328 ↗
57. Surface and bulk hydrophobic cement composites by tyre rubber addition10.1016/j.conbuildmat.2018.03.233 ↗
58. Evaluation of the wettability of mortar component granular materials through contact angle measurements10.1016/j.cemconres.2012.09.001 ↗
59. H.M. Bernardo, R.C. de O. Romano, M.A. Cincotto, R.G. Pileggi, The effect of water absorption and type of substrate on the performance of rendering mortars in the fresh and hardened state, Ambient. Construído. 20 (2020) 493–511. https://doi.org/10.1590/s1678-86212020000300441.10.1590/s1678-86212020000300441 ↗
60. Incorporation of bamboo charcoal for cement-based humidity adsorption material10.1016/j.conbuildmat.2019.04.173 ↗
61. Effects of iron ore tailings on the compressive strength and permeability of ultra-high performance concrete10.1016/j.conbuildmat.2020.119917 ↗
62. Technical and Environmental Feasibility of Interlocking Concrete Pavers with Iron Ore Tailings from Tailings Dams10.1061/(ASCE)MT.1943-5533.0001937 ↗
63. Characterization of mortars with iron ore tailings using destructive and nondestructive tests10.1016/j.conbuildmat.2016.11.065 ↗
64. The influence of cement type on the performance of advanced concretes designed by computing mix proportion technique
65. Utilization of rice husk ash and waste glass in the production of ternary blended cement mortar composites10.1016/j.jobe.2018.07.001 ↗
66. The influence of bagasse fibre and fly ash on the long-term properties of green cementitious composites10.1016/j.conbuildmat.2016.02.103 ↗
67. Effect of the chemical attack on the properties of cimentititous composites with partial substitution of ash from sugar cane bagasse in natura
68. Compressive strength of cement stabilized fly ash-soil mixtures10.1016/S0008-8846(99)00018-6 ↗
69. Compressive strength and microstructural analysis of unfired clay masonry bricks10.1016/j.enggeo.2009.08.010 ↗
70. Cement stabilised rammed earth. Part B: Compressive strength and stress-strain characteristics10.1617/s11527-010-9659-8 ↗
71. Characteristic properties of cement-stabilized rammed earth blocks10.1061/(ASCE)MT.1943-5533.0001170 ↗
72. Utilization of granulated blast furnace slag and cement in the manufacture of compressed stabilized earth blocks10.1016/j.conbuildmat.2018.01.125 ↗
73. Effect of W/C ratio on durability and porosity in cement mortar with constant cement amount10.1155/2014/273460 ↗
74. L.F. de Magalhães, S. França, M. dos S. Oliveira, R.A.F. Peixoto, S.A.L. Bessa, A.C. da S. Bezerra, Iron ore tailings as a supplementary cementitious material in the production of pigmented cements, J. Clean. Prod. 274 (2020) 123260. https://doi.org/10.1016/j.jclepro.2020.123260.10.1016/j.jclepro.2020.123260 ↗
75. Effects of autogenous healing on the recovery of mechanical performance of High Performance Fibre Reinforced Cementitious Composites (HPFRCCs): Part 110.1016/j.cemconcomp.2017.07.010 ↗
76. Lignocellulosic Materials for Fiber Cement Production10.1007/s12649-018-0536-y ↗
77. Taylor · 1997
78. P.J.C. Machado, R.A. dos R. Ferreira, L.A. de C. Motta, Study of the effect of silica fume and latex dosages in cementitious composites reinforced with cellulose fibers, J. Build. Eng. 31 (2020) 101442. https://doi.org/10.1016/j.jobe.2020.101442.10.1016/j.jobe.2020.101442 ↗
79. Utilizing spend garnets as sand replacement in alkali-activated mortars containing fly ash and GBFS10.1016/j.conbuildmat.2019.07.149 ↗
80. Strength and durability of coconut-fiber-reinforced concrete in aggressive environments10.1016/j.conbuildmat.2012.09.002 ↗
81. Strength, durability, thermal and run-off properties of fired clay roof tiles incorporated with ceramic sludge10.1016/j.conbuildmat.2018.05.187 ↗
82. M.E.A. Fidelis, R.D. Toledo Filho, F. de A. Silva, V. Mechtcherine, M. Butler, S. Hempel, The effect of accelerated aging on the interface of jute textile reinforced concrete, Cem. Concr. Compos. 74 (2016) 7–15. https://doi.org/10.1016/j.cemconcomp.2016.09.002.10.1016/j.cemconcomp.2016.09.002 ↗
83. S. Perera, N. Lam, M. Pathirana, • Lihai Zhang, D. Ruan, • Emad Gad, L. Zhang, E. Gad, Probabilistic modelling of forces of hail, Nat. Hazards. 91 (2018) 133–153. https://doi.org/10.1007/s11069-017-3117-7.10.1007/s11069-017-3117-7 ↗
84. Enhancing impact and Blast Resistance of Concrete with Fiber Reinforcement
85. An end of waste alternative for volcanic ash: A resource in the manufacture of ceramic tiles10.1016/j.conbuildmat.2020.120118 ↗
86. Experimental investigation on effects of calcined bentonite on fresh, strength and durability properties of sustainable self-compacting concrete10.1016/j.conbuildmat.2019.117062 ↗
87. Pozzolanic Activity and Filler Effect of Sugar Cane Bagasse Ash in Portland Cement and Lime Mortars10.1016/j.cemconcomp.2008.01.001 ↗
88. Microstructural, mechanical, and electrical properties of copper slag admixtured cement mortar
89. Reuse of iron ore mineral wastes in civil engineering constructions: A case study10.1016/j.resconrec.2008.07.007 ↗
90. Testing of cementitious roofing tile specimens using marble waste slurry10.1080/19397038.2019.1657981 ↗
91. Durabilidade de Compósitos de Concreto de Cimento Portland Produzidos com Agregados Reciclados da Construção Civil
92. Combined effects of mineral additions and curing conditions on strength and durability of self-compacting mortars exposed to aggressive solutions in the natural hot-dry climate in North African desert region10.1016/j.conbuildmat.2018.11.233 ↗
93. J.C. Mendes, R.R. Barreto, A.C.B. de Paula, F.P. da F. Elói, G.J. Brigolini, R.A.F. Peixoto, On the relationship between morphology and thermal conductivity of cement-based composites, Cem. Concr. Compos. 104 (2019) 103365. https://doi.org/10.1016/j.cemconcomp.2019.103365.10.1016/j.cemconcomp.2019.103365 ↗
94. Cellulose Aerogels for Thermal Insulation in Buildings: Trends and Challenges10.3390/coatings8100345 ↗
95. Experimental research on the performance of lightweight concrete containing foam and expanded clay aggregate10.1016/j.compositesb.2019.04.025 ↗
96. Flexural Strength and Thermal Conductivity of Fiber-Reinforced Calcium Silicate Boards Prepared from Fly Ash10.1061/(ASCE)MT.1943-5533.0002726 ↗
97. Porous thermal insulation materials derived from fly ash using a foaming and slip casting method10.1016/j.enbuild.2014.06.028 ↗
98. Thermal conductivity of rock-forming minerals10.1029/JB076i005p01278 ↗
99. An experimental study on thermal conductivity of concrete10.1016/S0008-8846(02)00965-1 ↗
100. S.U. ARIYADASA, G. L. M.; MUTHURATHNE, S. S. K.; ADIKARY, Investigating the Physical, Mechanical and Thermal Properties of Common Roofing Materials in Sri Lanka, in: Proc. 6th Annu. NBRO Symp., 2015.