A new post-peak behavior assessment approach for effect of steel fibers on bond stress-slip relationship of concrete and steel bar after exposure to high temperatures
Source abstract
Abstract
Abstract The effectiveness of the widely used admixture of steel fibers in the concrete-rebar bond behavior still has some less-known complexities despite numerous studies in this area. The contradictory results of previous studies serve as evidence for this statement. In this research, through reviewing the CEB-FIP MC2010 and ACI 408–12 codes, comparing the reported observations of previous researchers, and conducting 54 pullout tests, it was shown that the bond stress-slip graph between the rebar and fiber-reinforced concrete has a specific pattern different from that of plain concrete, by which the effectiveness of steel fibers in the bond strength can be evaluated with very good accuracy. In this novel approach, the post-peak behavior of the bond-slip graph is regarded as a measure of the effectiveness of fibers in the bond strength between concrete and rebar. Based on the results of this approach, adding steel fibers to the mix design by a volume ratio up to 1% increased the ratio of the two peaks in the bond-slip graph by 15 to 30%. It was also shown that the effects of steel fibers on the stresses at the first peak and the maximum peak would be different, and thus, the dual behavior of the fibers could be justified. Moreover, the influence of the two parameters of exposure temperature and cover to rebar diameter ratio on the bond behavior was examined. Based on the results of the post-peak behavior approach and using the nonlinear regression method, relationships were presented to model the bond strength as a function of the volume ratio of steel fibers, exposure temperature, and concrete cover to rebar diameter ratio and then assessed against the previous experimental findings and models.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fire effects on concrete materials · Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Load-Transfer Mechanism and Bond-Stress Components in Steel and Steel Fiber–Reinforced Concrete Structure10.1061/(ASCE)ST.1943-541X.0002441 ↗
2. Temperature effects on the bond behavior between deformed steel reinforcing bars and hybrid fiber-reinforced strain-hardening cementitious composite10.1016/j.conbuildmat.2019.117337 ↗
3. Development Length and Bond Behavior of Steel Bars in Steel Fiber–Reinforced Concrete in Flexural Test10.1061/(ASCE)MT.1943-5533.0002979 ↗
4. Bond behavior of reinforcement embedded in steel fiber reinforced concrete under chloride attack10.1002/suco.201800246 ↗
5. Anchorage in steel fiber reinforced concrete – concept, experimental evidence and design recommendations for concrete cone and concrete edge breakout failure modes10.1016/j.engstruct.2018.12.007 ↗
6. Shear transfer across cracks in steel fibre reinforced concrete10.1016/j.engstruct.2019.02.027 ↗
7. Bond stress distribution analysis between steel bar and steel fiber reinforced concrete using midpoint stress interpolation method10.1016/j.conbuildmat.2020.119866 ↗
8. ACI-ASCE Committee 408. Report on Bond of Steel Reinforcing Bars Under Cyclic Loads. Farmington Hills, MI: American Concrete Institute; 2012.
9. Effectiveness of fibers and binders in high-strength concrete under chemical corrosion
10. Structural performance of optimised spirally deformed steel fibre10.1016/j.engstruct.2020.110863 ↗
11. Compressive Stress-Strain Model for High-Strength Concrete Reinforced with Forta-Ferro and Steel Fibers10.1061/(ASCE)MT.1943-5533.0001990 ↗
12. Investigation of the effect of steel fibers on the shear crack-opening and crack-slip behavior of prestressed concrete beams using digital image correlation10.1016/j.engstruct.2019.05.030 ↗
13. Estimating properties of reactive powder concrete containing hybrid fibers using UPV
14. Failure mechanism and failure patterns of SCS composite beams with steel-fiber-reinforced UHPC10.1016/j.engstruct.2020.110471 ↗
15. Prediction of shear behavior of steel fiber-reinforced rubberized concrete beams reinforced with glass fiber-reinforced polymer (GFRP) bars10.1016/j.compstruct.2020.113010 ↗
16. Effect of steel fiber addition and aspect ratio on bond strength of cold-bonded fly ash lightweight aggregate concretes10.1016/j.conbuildmat.2013.05.059 ↗
17. Evolution of the bond strength between reinforcing steel and fibre reinforced concrete after high temperature exposure10.1016/j.conbuildmat.2018.05.065 ↗
18. Bond between deformed reinforcement and normal and high-strength concrete with and without fibers10.1617/s11527-009-9551-6 ↗
19. Bond Characteristics between High-Strength Bars and Ultrahigh-Performance Concrete10.1061/(ASCE)MT.1943-5533.0002919 ↗
20. Compressive behavior of steel fiber reinforced recycled aggregate concrete after exposure to elevated temperatures10.1016/j.conbuildmat.2014.08.012 ↗
21. A new bond model for reinforcing bars in steel fibre reinforced concrete10.1016/j.cemconcomp.2019.103405 ↗
22. Steel–concrete bond in lightweight fiber reinforced concrete under monotonic and cyclic actions10.1016/j.engstruct.2005.01.010 ↗
23. Effect of elevated temperature on bond between steel reinforcement and fiber reinforced concrete10.1016/j.firesaf.2007.11.002 ↗
24. Effects of Bar-Placement Conditions on Steel-Concrete Bond10.1617/s11527-005-9030-7 ↗
25. Comparison of Bond Strength of Steel Bars in Normal- and High-Strength Concrete10.1061/(ASCE)0899-1561(2004)16:4(365) ↗
26. Non-linear multivariable model for predicting the steel to concrete bond after high temperature exposure10.1016/j.conbuildmat.2020.118713 ↗
27. Post-fire elastic modulus of rubberized fiber-reinforced concrete-filled steel tubular stub columns: Experimental and theoretical study10.1016/j.jcsr.2020.106310 ↗
28. Modeling of mechanical bond–slip for steel-reinforced concrete under thermal loads10.1016/j.engstruct.2012.10.015 ↗
29. Post-heating flexural behavior and durability of hybrid PET–Rubber aggregate concrete10.1016/j.conbuildmat.2020.120359 ↗
30. Impact of elevated temperatures on the structural performance of recycled rubber concrete: Experimental and mathematical modeling10.1016/j.conbuildmat.2020.119374 ↗
31. Nematzadeh · 2020 · 2346
32. Direct tensile behaviors of steel-bar reinforced ultra-high performance fiber reinforced concrete: Effects of steel fibers and steel rebars10.1016/j.conbuildmat.2020.118054 ↗
33. The influence of steel fibres on compressive and tensile strength of ultra high performance concrete: A review10.1016/j.conbuildmat.2020.119459 ↗
34. Nematzadeh M, Mousavimehr M, Shayanfar J, Omidalizadeh M. Eccentric compressive behavior of steel fiber-reinforced RC columns strengthened with CFRP wraps: Experimental investigation and analytical modeling. Engineering Structures.226:111389.10.1016/j.engstruct.2020.111389 ↗
35. Assessment of MC2010 and AS3600 models for estimating instantaneous flexural crack widths in fibre reinforced concrete members10.1016/j.engstruct.2020.110271 ↗
36. Axial compressive performance of steel tube columns filled with steel fiber-reinforced high strength concrete containing tire aggregate after exposure to high temperatures10.1016/j.engstruct.2020.110608 ↗
37. Bond stress-slip relationship of oil palm shell lightweight concrete10.1016/j.engstruct.2016.08.064 ↗
38. Bond test for reinforcmen steel, Pull-out test
39. ASTM · 2012
40. C33. Standard specifications for concrete aggregates. Philadelphia, PA: ASTM
41. Flexural behavior of GFRP bar-reinforced calcium aluminate cement concrete beams containing forta-ferro fibers in acidic environment10.1016/j.conbuildmat.2020.120602 ↗
42. A new anchorage system for CFRP strips in externally strengthened RC continuous beams
43. Compressive and direct tensile behavior of concrete containing Forta-Ferro fiber and calcium aluminate cement subjected to sulfuric acid attack with optimized design10.1016/j.conbuildmat.2020.118999 ↗
44. Bond of reinforcing bars to steel fiber reinforced concrete10.1016/j.conbuildmat.2015.12.044 ↗
45. A370. Standard Test Methods and Definitions for Mechanical Testing of Steel Products. West Conshohocken, PA: ASTM
46. ISO · 1999
47. Bond strength of steel bars embedded in high-performance fiber-reinforced cementitious composite before and after exposure to elevated temperatures10.1016/j.firesaf.2017.06.006 ↗
48. Bond performance of reinforced alkali-activated composites using water-quenched slag as alternative fine aggregates10.1016/j.istruc.2020.01.007 ↗
49. Bond strength between corroded steel and recycled aggregate concrete incorporating nano silica10.1016/j.conbuildmat.2019.117441 ↗
50. ASTM C39, C39M · 2018
51. CEB-FIP. Model codes. Lausanne, Switzerland: International Federation for Structural Concrete; 2010.
52. Darwin · 1995
53. Splice strength of conventional and high relative rib area bars in normal and high-strength concrete
54. B.S. Hamad M.S. Itani Bond strength of reinforcement in high performance concrete: role of silica fume, casting position, and superplasticizer dosage ACI Materials Journal. 95 1998 499 511 https://doi.org/10.14359/39210.14359/392 ↗
55. Tension development length of reinforcing bars embedded in high-strength concrete10.1016/0141-0296(95)00096-P ↗
56. In situ mechanical properties of wall elements cast using self-consolidating concrete
57. Local bond stress-slip behavior of reinforcing bars embedded in plain and fiber concrete
58. Bond of confined steel fiber reinforced concrete to deformed bars
59. Bond behavior of normal and high-strength fiber reinforced concrete
60. Contribution of steel fiber on the dynamic tensile properties of hybrid fiber ultra high toughness cementitious composites using Brazilian test10.1016/j.conbuildmat.2020.118416 ↗
61. Compressing fresh concrete technique and the effect of excess water content on physical–mechanical properties of compressed concrete10.1016/j.matdes.2011.12.051 ↗
62. Evaluation of post-heating flexural behavior of steel fiber-reinforced high-strength concrete beams reinforced with FRP bars: Experimental and analytical results10.1016/j.engstruct.2020.111292 ↗
63. M. Nematzadeh M. Mousavimehr Residual Compressive Stress-Strain Relationship for Hybrid Recycled PET–Crumb Rubber Aggregate Concrete after Exposure to Elevated Temperatures Journal of Materials in Civil Engineering. 31 2019 04019136 10.1061/(ASCE)MT.1943-5533.000274910.1061/(ASCE)MT.1943-5533.0002749 ↗
64. Experimental investigations on residual bond performance in concrete subjected to elevated temperature10.1016/j.engstruct.2019.02.061 ↗
65. Bond Strength of Corroded High Yield Steel Bars Embedded in Normal Strength Concrete10.1088/1757-899X/606/1/012005 ↗
66. Esfahani · 1996
67. Comprehensive equation of local bond stress between UHPC and reinforcing steel bars
68. Evaluation of bond strength between steel rebars and concrete for heat-damaged and repaired beam-end specimens10.1016/j.engstruct.2018.08.056 ↗
69. Bond Behavior of Spiral Ribbed Ultra-high Strength Steel Rebar Embedded in Plain and Steel Fiber Reinforced High-Strength Concrete10.1007/s12205-019-2449-0 ↗
70. The effect of steel fiber on the bond between concrete and deformed steel bar in SFRCs10.1016/j.conbuildmat.2012.09.098 ↗
71. Bond-slip behavior between pre-corroded rebar and steel fiber reinforced concrete10.1016/j.conbuildmat.2018.06.116 ↗