journal article·2021-05

Properties of concrete incorporating alum sludge in different conditions as partial replacement of fine aggregate

A.B.M.A. Kaish, Temple Chimuanya Odimegwu, Ideris Zakaria, Manal Mohsen Abood, Lutfun Nahar

Publisher page

Abstract

Abstract Water treatment plant generates alum sludge as waste during the process of treating drinking water for human consumption. Notwithstanding the benefits of treating water, there are still problems associated with the disposal of waste generated from the water treatment plant after the treatment process. Studies have shown that the conventional disposal method is associated with environmental hazards; and there is a need to derive more sustainable method of alum sludge disposal. This study focused on investigating the properties of concrete incorporating alum sludge as a partial replacement of fine aggregate. The alum sludge used in this study as replacement of fine aggregate was prepared in two ways; oven-dried under temperature 105 °C and 300 °C heated alum sludge (heated in the furnace). Both alum sludge (oven-dried alum sludge, 300 °C heated alum sludge) was crushed/grinded to obtain a maximum particle size of 65 µm and used to replace fine aggregate in different proportions (0%, 5%, 10% and 15%). The produced concrete was tested for fresh properties; and then cured at 7, 28, 56, 90 and 180 days to test for hardened and durability properties. The results from the study showed that oven-dried alum sludge and 300 °C treated alum sludge produce a workable mix and can be used as replacement of fine aggregate with optimum replacement content of 10%. Both alum sludge improved the density of the concrete, strength properties of the concrete and concrete durability. At 15% replacement content of fine aggregate with oven dried and 300°C heated alum sludge, yield a decrease in workability and strength properties, with poor durability properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Valorization of drinking water treatment sludges as raw materials to produce concrete and mortar10.3844/ajessp.2008.223.228 ↗
2. Properties of green concrete containing quarry rock dust and marble sludge powder as fine aggregate
3. T. Kaosol, (2009). “Reuse Water Treatment Sludge for Hollow Concrete Block Manufacture.”. International Conference on Science, Technology and Innovation for Sustainable Well-Being, pp.: 23-24.
4. Influence of limestone waste as partial replacement material for sand and marble powder in concrete properties
5. An Experimental Study on Usage of Quarry Dust as Partial Replacement For Sand In Concrete And Mortar
6. Mix proportioning and performance of a crushed limestone sand- concrete10.34118/jbms.v1i1.4 ↗
7. Multi-Scale Investigation of the Performance of Limestone in Concrete10.1016/j.conbuildmat.2014.10.042 ↗
8. Effect of quarry rock dust on the flexural strength of concrete
9. Influence of pre-treated alum sludge on properties of high-strength self-compacting concrete10.1016/j.jclepro.2018.08.156 ↗
10. H.M. Owaid, H. Roszilah, S.A. Siti Rozaimah, T.K. Noorhisham, (2012). Effects of Alum Sludge as Cement Partial Replcement on the Mechanical Properties of High-performance Concrete. ITC 2012 (pp. 105-112). Kuala Lumpur: Faculty of Engineering and Built Environment Universiti Kebangsaan Malaysia.
11. Influence of thermally activated alum sludge ash on the engineering properties of multiple-blended binders concretes10.1016/j.conbuildmat.2014.03.014 ↗
12. Ing., D. D. (2008). “Opportunities for Water Treatment Sludge Re-Use“. Geoscience Engineering Vol. LIV, No.1, pp. 11-22 ISSN 1802-5420. Available online at http://gse.vsb.cz.
13. Influence of thermally activated alum sludge ash on the near surface characteristics of multiple-blended binders concretes10.4028/www.scientific.net/AMM.754-755.421 ↗
14. Durability properties of multiple – blended binder concretes incorporating thermally activated alum sludge ash10.1016/j.conbuildmat.2018.12.149 ↗
15. Influence of magnesium sulfate on self-compacting alum sludge concrete incorporating with pozzolanic materials10.5539/mas.v10n8p187 ↗
16. Physical and Mechanical Properties of high-performance concrete with alum sludge as partial cement replacement
17. A novel type of controlled low strength material derived from alum sludge and green materials10.1016/j.conbuildmat.2018.01.078 ↗
18. Lightweight composite concrete produced with water treatment sludge and sawdust: Thermal properties and potential application10.1016/j.conbuildmat.2010.06.012 ↗
19. Manufacture and performance of light weight aggregate from municipal solid waste incinerator fly ash and reservoir for self –consolidating light weight concrete10.1016/j.cemconcomp.2012.07.004 ↗
20. Application of water treatment sludge in manufacturing of lightweight aggregates10.1016/j.conbuildmat.2013.02.016 ↗
21. Nur Quraatu Aini, M. R., & Hamid, R. (2015). Mechanical Properties of Lightweight Alum Sludge Aggregate Concrete. Applied Mechanics and Materials, ISSN: 1662-7482, Vols. 754-755, pp 413-416.10.4028/www.scientific.net/AMM.754-755.413 ↗
22. BS 8500: Part 1. (2006). Concrete – Complementary British Standard to BS EN 206 – 1 – Part 2: Specification for Constituent Materials and Concrete. British Standards Institution, London.
23. ASTM D854. (2014). Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer. Annual Book of ASTM Standards
24. BS 1377: Part 2. (1990). Methods of test for soils for civil engineering purposes. Classification tests. British Standards Institution, London
25. BS 1881:part 102: (1983). Method for Determination of Slump. British Standards.
26. BS 1881:part 103: (1983). Method for Determination of Slump. British Standards.
27. Use of sewage sludge ash as mineral admixture in mortars10.1680/coma.2006.159.4.153 ↗
28. BS EN 12390: Part 7. (2000). Testing hardened concrete. Density of hardened concrete. British Standards Institution, London.
29. BS EN 12390: Part 3. (2000). Testing hardened concrete. Compressive strength of test specimens. British Standards Institution, London
30. ASTM-C496. (2004). Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens. West Conshocken, PA, USA: ASTM International.
31. ASTM-C293. (2002). Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading). West Conshocken, PA, USA: ASTM International
32. ASTM-C597. (2002). Standard Test Method for Pulse Velocity Through Concrete. West Conshocken, PA, USA: ASTM International.
33. Estimation of compressive strength of concrete member using ultra sonic pulse velocity method10.4028/www.scientific.net/KEM.605.143 ↗
34. Relationship between ultrasonic pulse velocity and standard concrete cube crushing strength
35. Relationship between ultrasonic velocity and compressive strength for high-volume mineral-admixtured concrete10.1016/j.cemconres.2004.04.017 ↗
36. Evaluation of rubbercrete based on ultrasonic velocity and rebound hammer tests10.1016/j.conbuildmat.2010.09.004 ↗
37. Effect of limestone powder on microstructure of concrete
38. ASTM-C642. (1997). Standard Test Method for Density, Absorption and Voids in Hardened Concrete. West Conshocken, PA, USA: ASTM International.
39. ASTM-C157. (2014). Standard Test Method for Length Change of Hardened Hydraulic – Cement Mortar and Concrete. West Conshocken, PA, USA: ASTM International.
40. A.H. Ahmed, B.R. Abdurrahman, Z.A. Mohammed, (2009). Influence of Limestone Powder as Partial Replacement of Cement on Concrete and the Effect of High Temperature on It. https://www.researchgate.net/publication/328092068.
41. Effects of Elevated Temperatures on Properties of Concrete10.1016/j.firesaf.2007.01.003 ↗
42. M.A. Salau, O.J. Oseafiana, T.O. Oyegoke, (2015). Effect of Elevated Temperature on Concrete with Recycled Coarse Aggregate. 2nd International Conference on Innovative Materials, Structures and Technologies (pp. 1 - 8). IOP Conf. Series: Materials Science and Engineering 96.10.1088/1757-899X/96/1/012078 ↗
43. ASTM C1012, (2004) Standard Test Methods for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution.
44. Effects of different industrial waste materials as partial replacement of fine aggregate on strength and microstructure properties of concrete10.1016/j.jobe.2020.102092 ↗