25 years of field exposure of pre-cracked concrete beams; combined impact of spacers and cracks on reinforcement corrosion
Source abstract
Abstract
The state of corrosion of three pre-cracked concrete beams was investigated after 25 years of marine exposure (atmospheric, tidal and submerged). The influence of inadequate plastic spacers was found to overrule the possible impact of bending cracks on reinforcement corrosion. Increased chloride ingress was detected in cracked areas, but very little corrosion was observed where cracks reached the reinforcement. Also, high chloride content was measured in uncracked parts of the beams, but no or very limited corrosion was observed outside spacers and a few cracks. It is hypothesised that corrosion, initiated early at weak spots (here at plastic spacers) can protect the remaining reinforcement from corrosion.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete Corrosion and Durability · Concrete and Cement Materials Research · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. A.C.B. Käthler, U.M. Angst, M. Wagner, C.K. Larsen, B. Elsener, Effect of cracks on chloride induced corrosion of steel in concrete - a review, Norwegian Public Roads Administration, NPRA reports, Norwegian Public Roads Administration, Oslo, Norway, 2017, p. 41.
2. B.J. Pease, Influence of concrete cracking on ingress and reinforcement corrosion, Department of Civil Engineering, Technical University of Denmark, Kgs. Lyngby, Denmark, 2010. Report: BYG R-233, ISBN: 9788778773128, ISSN: 1601-2917, https://www.byg.dtu.dk/Forskning/Publikationer/Ph-d-afhandlinger
3. C. Arya, L.A. Wood, S. Alexander, P. Jackson, Technical Report 44 – Relevance of cracking in concrete to reinforcement corrosion Technical Report, The Concrete Society, 2015.
4. Influence of cracking on reinforcement corrosion
5. K. Tuutti, Corrosion of steel in concrete, KTH, Kungliga Tekniska Högskolan i Stockholm, Swedish Cement and Concrete Research Institute, Stockholm, ISSN 0346-6906, 1982, p. 468.
6. The effect of the steel–concrete interface on chloride-induced corrosion initiation in concrete: a critical review by RILEM TC 262-SCI10.1617/s11527-019-1387-0 ↗
7. Influence of crack frequency on reinforcement corrosion in concrete10.1016/S0008-8846(96)85022-8 ↗
8. Autogenous healing and reinforcement corrosion of water-penetrated separation cracks in reinforced concrete10.1016/S0029-5493(97)00266-5 ↗
9. Mineralogical Sequence of Self-Healing Products in Cracked Marine Concrete10.3390/min9050284 ↗
10. T. Danner, M.R. Geiker, On the Influence of Surface and Crack Orientation and Exposure on Ingress in Cracks, Proceedings of the 72nd RILEM Week 2018 & SLD4, The 4th International conference on service life design for infrastructures, CONMOD2018 International symposium on concrete modelling, Rilem publications, 2018, p. 600.
11. Fédération International du Béton (fib), fib Model Code for Service Life Design - Bulletin 34, Lausanne, Switzerland, 2006, p. 116.
12. Long-term Influence of Concrete Surface and Crack Orientation on Self-healing and Ingress in Cracks
13. Holtmon · 1994
14. https://www.tide-forecast.com/locations/Sandnessjoen/tides/latest, 2017.
15. A. Demayo, Elements in sea water, in: D.R. Lide (Ed.) CRC HAndbook of Chemistry and Physics, CRC Press, U.S.A., 1992.
16. U.H. Jakobsen R. No 829235, Microscopy of phases formed in cracks of 25 years old seawater exposed concrete Danish Technological Institute (DTI) 2018 Taastrup, Denmark
17. Holtmon · 1994
18. Towards the understanding of chloride profiles in marine exposed concrete, impact of leaching and moisture content10.1016/j.conbuildmat.2016.05.069 ↗
19. Vegdirektoratet, Retningslinje, Håndbok R211 Feltundersøkelser Oslo, Norway, 2014.
20. Vegdirektoratet · 2016
21. T. Danner, A.B. Revert, M.R. Geiker, Field Station Sandnessjøen - Effect of cracks in concrete, Data report Report 374, Statens vegvesens rapporter, Statens vegvensen (Norwegian Public Roads Administration), Trondheim, 2020.
22. Test methods for on site measurement of resistivity of concrete — a RILEM TC-154 technical recommendation10.1016/S0950-0618(00)00061-1 ↗
23. T. Danner, K. Hornbostel, K. De Weerdt, M.R. Geiker, μ-XRF-characterisation of chloride ingress and self-healing in cracked concrete, NORDIC CONCRETE RESEARCH. Proceedings of the XXIII Nordic Concrete Research Symposium, Norsk Betongforening, Trondheim/Fornebu, 2017, pp. 372.
24. Alkali–silica reaction (ASR)—performance testing: Influence of specimen pre-treatment, exposure conditions and prism size on concrete porosity, moisture state and transport properties10.1016/j.cemconres.2013.05.020 ↗
25. Vaisala, HM44 Datasheet B211768 EN-A - Vaisala, 2018.
26. The characterisation of powders by gravimetric water vapour sorption
27. An improved method to validate the relative humidity generation in sorption balances10.1016/j.ejpb.2008.10.013 ↗
28. Development of pore structure, moisture sorption and transport properties in fly ash blended cement-based materials10.1016/j.conbuildmat.2020.120007 ↗
29. Differentiation of interlayer and adsorbed water in hydrated portland cement by thermal analysis10.1016/0008-8846(71)90016-0 ↗
30. A study of the state of water and stoichiometry of bottle-hydrated Ca3SiO510.1016/0008-8846(74)90130-6 ↗
31. A model for hydrated Portland cement paste as deduced from sorption-length change and mechanical properties10.1007/BF02473639 ↗
32. A method to determine binder content in small samples of cementitious material using hydrochloric acid and ICP-OES analysis
33. K. Hornbostel, U. Angst, C.K. Larsen, Field testing after 16 years exposure, Solsvik feltstasjon - prøving av betong i marint miljø, Statens vegvesens rapporter No. 675, Statens vegvensen (Norwegian Public Roads Administration), Oslo, Norway, 2020.
34. Critical chloride content in reinforced concrete — a review10.1016/j.cemconres.2009.08.006 ↗
35. Marine chlorides - A probabilistic approach to derive provisions for EN 206-1
36. Service Life Forecasting for Reinforced Concrete Incorporating Potential-Dependent Chloride Threshold10.5006/1286 ↗
37. The steel/concrete interface10.1617/s11527-017-1010-1 ↗
38. Thermodynamic investigation of the CaO Al2O3 CaSO4 H2O system at 25°C and the influence of Na2O10.1016/0008-8846(93)90153-Z ↗
39. Steel Corrosion in Submerged Concrete Structures—Part 1: Field Observations and Corrosion Distribution Modeling10.5006/1945 ↗
40. Steel Corrosion in Submerged Concrete Structures—Part 2: Modeling of Corrosion Evolution and Control10.5006/1944 ↗
41. S. Alzyoud, Effect of reinforcement spacers on concrete microstructure and durability, Civil and Environmental EngineeringImperial College London, 2015, p. 182.
42. Influence of reinforcement spacers on mass transport properties and durability of concrete structures10.1016/j.cemconres.2016.05.006 ↗
43. A field study of critical chloride content in reinforced concrete with blended binder10.1002/maco.200905282 ↗
44. Limitations of the use of concrete bulk resistivity as an indicator for the rate of chloride-induced macro-cell corrosion10.1002/suco.201500141 ↗
45. 5 years of in situ reinforcement corrosion monitoring in the splash and submerged zone of a cracked concrete element10.1016/j.conbuildmat.2021.122923 ↗
46. High performance concrete cover—why it is needed, and how to achieve it in practice10.1016/0950-0618(96)00007-4 ↗
47. On the importance of execution for obtaining the designed durability of reinforced concrete structures10.1002/maco.201206754 ↗
48. K. Hornbostel, B. Pedersen, Austefjorden feltstasjon – prøvning av betong I marint miljø, SVV rapporter No. 494, Statens vegvesen / Norwegian Public Roads Administration, 2020.