Bond behavior of CFRP-concrete bonding interface considering degradation of epoxy primer under wet-dry cycles
Source abstract
Abstract
Abstract The excellent performance of the CFRP-concrete bonding interface is a key to ensure the reliability and effectiveness of the rehabilitation in concrete structures with external fiber reinforced polymer (FRP). Meanwhile, the epoxy primer, which bonded the FRP plate and the concrete substrate, is significantly affected by the aggressive environment. In this paper, two kinds of experiments which associated with the CFRP-concrete specimens and the epoxy primer after corroding in a wet-dry cycles environment were conducted. It shows that the immersion area of the epoxy primer has a significant influence on the properties of the moisture absorption, and that would lead to a degradation in the mechanical properties of the CFRP-concrete interface. Simultaneously, the failure modes of the CFRP-concrete interface presented a transformation from the epoxy/concrete interaction layer to the epoxy primer layer along with the increase of aging duration. To further depict the degraded bond behavior, a time-dependent bond-slip model considering the degradation of epoxy primer was proposed, and the interface fracture energy was utilized to quantify the degree of the deterioration. By comparing with the value of interface fracture energy, it was figured out that the normal bond-slip model (Popovics model) is not enough for the safety of the concrete structures rehabilitated with external CFRP, and the proposed time-dependent bond-slip model is more accurate in evaluating the time-dependent mechanical properties of concrete structures suffering in an aggressive environment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Numerical modeling and experimental validation of fatigue damage in cross-ply CFRP composites under inhomogeneous stress states10.1016/j.compositesb.2020.108050 ↗
2. Damage behaviors of unidirectional CFRP in orthogonal cutting: a comparison between single- and multiple-pass strategies10.1016/j.compositesb.2020.107774 ↗
3. Durability of CFRP-concrete joints under freeze-thaw cycling10.1016/j.coldregions.2010.11.008 ↗
4. Bond-slip behaviors of BFRP-to-concrete interfaces exposed to wet/dry cycles in chloride environment10.1016/j.compstruct.2019.03.049 ↗
5. Repair of fire-damaged RC slabs with basalt fabric-reinforced shotcrete10.1016/j.conbuildmat.2018.07.043 ↗
6. Behavior of RC beams externally strengthened with GSM & CFRP sheets.2020 Advances in Science and Engineering Technology International Conferences (ASET)
7. Effects of hybrid water immersion, environmental exposures, and axial load on the mechanical properties of concrete filled epoxy-based glass fiber reinforced polymer tubes10.1016/j.conbuildmat.2018.10.232 ↗
8. The bond behaviour of CFRP-to-concrete bonded joints under fatigue cyclic loading: an experimental study10.1016/j.conbuildmat.2020.121674 ↗
9. Debonding damage detection of the CFRP-concrete interface based on piezoelectric ceramics by the wave-based method10.1016/j.conbuildmat.2019.03.042 ↗
10. Assessment of bond strength in CFRP retrofitted beams under marine environment10.1016/j.compstruct.2016.01.032 ↗
11. Temperature effect on the mechanical properties of carbon, glass and carbon–glass FRP laminates10.1016/j.conbuildmat.2014.11.020 ↗
12. Durability of plain concrete prism strengthened with galvanized steel mesh and CFRP laminates under harsh environmental conditions
13. Debonding of FRP-plated reinforced concrete beam, a bonslip analysis. I. Theoretical formulation10.1016/j.ijsolstr.2006.01.014 ↗
14. Analytical modeling of bond behavior between FRP plate and concrete10.1016/j.compositesb.2014.01.026 ↗
15. Modeling bond between corrosion-cracked concrete and composite sheets
16. Bond-slip model considering freeze-thaw damage effect of concrete and its application10.1016/j.engstruct.2019.109831 ↗
17. Bond–slip models for double strap joints strengthened by CFRP10.1016/j.compstruct.2009.09.042 ↗
18. Novel bond-slip model between concrete and angular CFRP fan type anchoraged CFRP strip
19. Bond-slip models for FRP sheets/plates bonded to concrete10.1016/j.engstruct.2005.01.014 ↗
20. A numerical approach to the complete stress-strain curve of concrete10.1016/0008-8846(73)90096-3 ↗
21. Effect of salt solution wet-dry cycling on the bond behavior of FRP-concrete interface10.1016/j.conbuildmat.2020.119317 ↗
22. Anchorage strength models for FRP and steel plates bonded to concrete10.1061/(ASCE)0733-9445(2001)127:7(784) ↗
23. Full-range behavior of FRP-to-concrete bonded joints10.1016/j.engstruct.2003.11.006 ↗
24. Effects of exposure to elevated temperatures and subsequent immersion in water or alkaline solution on the mechanical properties of pultruded BFRP plates10.1016/j.compositesb.2015.03.066 ↗
25. Effect of moisture absorption on the mechanical behavior of carbon fiber/epoxy matrix composites10.1007/s10853-012-6947-4 ↗
26. An investigation of the long-term water uptake behavior and mechanisms of carbon fiber/977-2 epoxy composites10.1002/pen.24830 ↗
27. Durability study of pultruded CFRP plates immersed in water and seawater under sustained bending: Water uptake and effects on the mechanical properties10.1016/j.compositesb.2014.10.034 ↗
28. Durability of GFRP nanocomposites subjected to hygrothermal ageing10.1016/j.compositesb.2014.09.028 ↗
29. Long-Term durability of basalt fiber-reinforced polymer (BFRP) sheets and the epoxy resin matrix under a wet-dry cyclic condition in a chloride-containing environment
30. Effect of hydrothermal ageing on the thermal and delamination fracture behaviour of CFRP composites10.1016/j.compositesb.2014.06.006 ↗
31. S. Radfar, G. Foret, K. Sab, Failure mode analysis of fibre reinforced polymer plated reinforced concrete beams, in: Proceedings of the 6th International Conference on FRP Composites in Civil Engineering, 2012.
32. Diffusion kinetics, swelling, and degradation of corrosion-resistant C-glass/epoxy woven composites in harsh environments10.1016/j.compstruct.2018.03.078 ↗
33. Influence of environmental aging on properties of polymeric mortars10.1061/(ASCE)0899-1561(2004)16:5(461) ↗
34. Wet lay-up manufactured FRPs for concrete and masonry repair: influence of water on the properties of composites and on their epoxy components10.1061/(ASCE)CC.1943-5614.0000132 ↗
35. Diffusion of water into an epoxy adhesive: comparison between bulk behaviour and adhesive joints10.1016/0143-7496(95)91624-F ↗
36. Hygrothermal effects of epoxy resin. Part II: variations of glass transition temperature10.1016/S0032-3861(98)00791-5 ↗
37. Hygrothermal effects of epoxy resin. Part I: the nature of water in epoxy10.1016/S0032-3861(98)00790-3 ↗
38. Evaluation of prestressed basalt fiber and hybrid fiber reinforced polymer tendons under marine environment10.1016/j.matdes.2014.07.064 ↗
39. Seawater ageing effect on the mechanical properties of composites with different fiber and matrix types10.1177/0021998318811514 ↗
40. Flexural behavior of epoxy under accelerated hygrothermal conditions
41. Moisture absorption-desorption effects in adhesive joints10.1016/j.ijadhadh.2009.05.001 ↗
42. Effects of humidity on an epoxy adhesive10.1016/0143-7496(92)90053-X ↗
43. Effect of wet-dry cycles on the bond behavior of concrete elements strengthened with NSM CFRP laminate strips10.1016/j.compstruct.2015.05.053 ↗
44. Bond-slip behaviors of BFRP-to-concrete interfaces exposed to wet/dry cycles in chloride environment10.1016/j.compstruct.2019.03.049 ↗
45. J.W. Shi, H. Zhu, Z.S. Wu, Y.Q. Dai, et.al. Digital image correlation method for measuring the bond-slip relationship of FRP sheet-concrete interface. China Civil Eng. J. 2012;045(010):13-22. (In Chinese) https://doi.org/ CNKI: SUN: TMGC.0.2012-10-004.
46. Development of the nonlinear bond stress–slip model of fiber reinforced plastics sheet–concrete interfaces with a simple method10.1061/(ASCE)1090-0268(2005)9:1(52) ↗
47. GB/T 50082-2009, Standard for test methods of long-term performance and durability of ordinary concrete. Beijing: China Architecture & Building Press; 2009 (In Chinese).
48. Specifications for Concrete Construction of Port and Waterway Engineering (JTS 202-2011), Ministry of Transport of China. Beijing, 2011.
49. Update on engineering and structural adhesives
50. Aging of GFRP laminates and confinement of concrete columns10.1016/j.compstruct.2005.11.033 ↗
51. Moisture absorption and desorption of composite materials10.1177/002199837601000101 ↗
52. Interface law for FRP-concrete delamination10.1016/j.compstruct.2006.07.001 ↗
53. Bond behavior between fiber-reinforced polymer laminates and concrete