journal article·2021-09

Bio-consolidation of cracks with fly ash amended biogrouting in concrete structures

Sumit Joshi, Shweta Goyal, M. Sudhakara Reddy

Publisher page

Abstract

Abstract Application of microbial induced carbonate precipitation (MICP) via biomineralization process has been considered a novel method in improving durability properties and crack healing of concrete structures. The bio-inspired treatment of cracks had extensively adopted a microbial self-healing approach for new concrete structures, but limited studies were done to repair cracks in existing concrete structures. In the present study, fly ash amended bacterial grout with optimum flowability properties for cracks' bio-consolidation. Among different fly ash amended bacterial grouts, maximum fluidity and workability (as fresh properties) and compressive strength (as hardened grout property) were observed in 40% fly ash amended bacterial grout. Crack treatment in horizontal orientation with injectable bacterial grout and curing method of ponding with bacterial suspension showed maximum mechanical strength recovery and significant reduction in permeation. In case of crack treatment in vertical orientation and curing method of spraying with bacterial suspension, the strength gain was nominal and permeation significantly improved. The developed fly ash amended biogrout will help as an economical and environment-friendly MICP technology in injection-based applications to remove existing cracks in the concrete structures in service.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microbial Applications in Construction Materials · Marine Sponges and Natural Products · Bacterial biofilms and quorum sensing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Infrastructure and the environment10.1146/annurev.environ.022108.180216 ↗
2. Influence of biogenic treatment in improving the durability properties of waste amended concrete: a review10.1016/j.conbuildmat.2020.120170 ↗
3. Recent durability studies on concrete structure10.1016/j.cemconres.2015.05.021 ↗
4. Assessment of the durability of concrete from its permeation properties: a review10.1016/S0950-0618(00)00058-1 ↗
5. Reducing the environmental impact of concrete
6. Deterioration of concrete structures along with case studies in India, P
7. Self-healing polymers and composites10.1146/annurev-matsci-070909-104532 ↗
8. A review of self-healing concrete for damage management of structures10.1002/admi.201800074 ↗
9. A review on surface treatment for concrete–Part 2: performance10.1016/j.conbuildmat.2016.11.128 ↗
10. Microbial concrete: way to enhance the durability of building structures10.1061/(ASCE)MT.1943-5533.0000159 ↗
11. Biomineralization for sustainable construction – A review of processes and applications10.1016/j.earscirev.2015.05.008 ↗
12. Engineered applications of ureolytic biomineralization: a review10.1080/08927014.2013.796550 ↗
13. Bacteria-based repair and self-healing of concrete
14. Microbially induced calcium carbonate precipitation (MICP) and its potential in bioconcrete: microbiological and molecular concepts10.3389/fmats.2019.00126 ↗
15. Microbial healing of cracks in concrete: a review10.1007/s10295-017-1978-0 ↗
16. Bioconcrete: next generation of self-healing concrete10.1007/s00253-016-7316-z ↗
17. Current challenges and future directions for bacterial self-healing concrete10.1007/s00253-018-8830-y ↗
18. Application of microbially induced calcium carbonate precipitation in designing bio self-healing concrete10.1007/s11274-018-2552-2 ↗
19. Autonomous healing in concrete by bio-based healing agents–A review10.1016/j.conbuildmat.2017.04.111 ↗
20. Biogrout: a novel binding material for soil improvement and concrete repair10.3389/fmicb.2016.00314 ↗
21. External treatments for the preventive repair of existing constructions: a review10.1016/j.conbuildmat.2018.10.173 ↗
22. Performance evaluation of lime-based grout used for consolidation of brick masonry walls10.1061/(ASCE)MT.1943-5533.0002692 ↗
23. Application of a capillary crystalline material to enhance cement grout for sealing tunnel leakage10.1016/j.conbuildmat.2019.04.095 ↗
24. Evaluation of the sealing effectiveness of expansive cement grouts through a novel water penetration test
25. Characterization of two urease-producing and calcifying Bacillus sp. isolated from Cement10.4014/jmb.1006.06032 ↗
26. Influence of nutrient components of media on structural properties of concrete during biocementation10.1016/j.conbuildmat.2017.10.055 ↗
27. IS: 8112-2013 (2013) Indian standard specification for 43 grade ordinary portland cement. Bureau of Indian Standards, New Delhi-110002.
28. IS: 3812-2003 (2003) Specification for pulverized fuel ash for use as pozzolana in Cement, cement mortar and concrete. Bureau of Indian Standards, New Delhi-110002.
29. IS: 383-1970 (1970) Indian standard specification for coarse and fine aggregates from natural sources for concrete. Bureau of Indian Standards, New Delhi-110002.
30. ASTM C939-10 (2010) Standard test method for flow of grout for preplaced-aggregate concrete (Flow cone method). ASTM International, West Conshohocken, PA. www.astm.org.
31. Influence of water-reducing admixtures on properties of cement paste—a miniature slump test10.1520/CCA10190J ↗
32. ASTM C942-15 (2015) Standard test method for compressive strength of grouts for preplaced-aggregate concrete in the laboratory, ASTM International, West Conshohocken, PA. www.astm.org.
33. IS: 516-1959 (1959) Indian standard methods of tests for strength of concrete. Bureau of Indian Standards, New Delhi-110002.
34. ASTM C1585-04 (2004) Standard test method for measurement of rate of absorption of water by hydraulic-cement concretes. ASTM International, West Conshohocken, PA. http://www.astm.org.
35. Basic rheological and mechanical properties of high-volume fly ash grouts10.1016/S0950-0618(02)00026-0 ↗
36. Grouts incorporating supplementary cementitious materials for two-stage concrete10.1061/(ASCE)MT.1943-5533.0001841 ↗
37. Effect of environmental temperature and fly ash addition in hydraulic lime grout behavior10.1016/j.conbuildmat.2010.02.001 ↗
38. Coal fly ash: a retrospective and future look10.1016/S0016-2361(98)00148-3 ↗
39. Study of the material properties of fly ash added to oyster cement mortar10.1016/j.conbuildmat.2012.11.021 ↗
40. An investigation of rheological properties of cement-based grout mixed with rice husk ash (RHA)10.1016/j.conbuildmat.2015.05.025 ↗
41. Use of bacterial cell walls as a viscosity-modifying admixture of concrete10.1016/j.cemconcomp.2014.08.007 ↗
42. Influence of Sporasarcina pasteurii cells on rheological properties of cement paste10.1016/j.conbuildmat.2019.07.132 ↗
43. Effect of fly ash fineness on compressive strength and pore size of blended cement paste10.1016/j.cemconcomp.2004.07.003 ↗
44. Absorption of water and chloride into concrete10.1680/macr.1992.44.158.31 ↗
45. Influence of substrate mineralogy on bacterial mineralization of calcium carbonate: implications for stone conservation10.1128/AEM.07044-11 ↗