journal article·2021-09

Effects of fiber clustering on fatigue behavior of steel fiber reinforced concrete beams

Danying Gao, Zhiqiang Gu, Congjie Wei, Chenglin Wu, Yuyang Pang

Publisher page

Abstract

Abstract This paper investigated the effects of fiber clustering on fatigue behavior of steel-fiber-reinforced concrete (SFRC) beams with reinforcements by experimental and numerical analysis. The steel fiber volume fractions of beams were 0 vol%, 0.5 vol%, 1.0 vol%, and 1.5 vol%. One beam was tested under static loading, and eight beams under fatigue loading with different stress levels. Moreover, the fiber distribution in the cross section of concrete was experimentally characterized to understand the underlying mechanism. The results indicated that the fatigue life of beam increased with increasing fiber volume fraction from 0 to 1.0 vol%, and decreased from 1.0 vol% to 1.5 vol% due to a significant amount of fiber clusters for the beam with 1.5 vol% fiber volume fraction, and thus resulted in the decreased fatigue performance of the beam. Based on the statistical results of fiber distance distribution in the concrete section, fiber clustering was considered in the concrete damaged plasticity model in ABAQUS to simulate the crack patterns of SFRC beam, and validated by the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Structural Load-Bearing Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Experimental evaluation of fiber reinforced concrete fracture properties10.1016/j.compositesb.2009.09.002 ↗
2. Fracture behaviour of steel fibre-reinforced concrete at a wide range of loading rates10.1016/j.ijimpeng.2014.04.009 ↗
3. Direct tensile self-sensing and fracture energy of steel-fiber-reinforced concretes10.1016/j.compositesb.2019.107714 ↗
4. Mechanical properties of steel fiber-reinforced concrete10.1061/(ASCE)0899-1561(2007)19:5(385) ↗
5. Size and geometry dependent tensile behavior of ultra-high-performance fiber-reinforced concrete10.1016/j.compositesb.2013.10.072 ↗
6. Properties of high-strength steel fiber-reinforced concrete beams in bending10.1016/S0958-9465(98)00040-7 ↗
7. Behaviour of plain and steel-fibre-reinforced high-strength concrete under uniaxial and biaxial compression10.1680/macr.2005.57.10.603 ↗
8. An experimental study on the tensile strength of steel fiber reinforced concrete10.1016/j.compositesb.2009.12.003 ↗
9. Implications of test methodology on post-cracking and fracture behaviour of Steel Fibre Reinforced Concrete10.1016/j.compositesb.2012.10.016 ↗
10. Structural behaviour of steel fibre reinforced concrete
11. Flexural behaviour of RC beams in fibre reinforced concrete10.1016/j.compositesb.2012.06.003 ↗
12. Enhancement of impact performance of reinforced concrete beams without stirrups by adding steel fibers10.1016/j.conbuildmat.2017.04.005 ↗
13. How do steel fibers improve the shear capacity of reinforced concrete beams without stirrups10.1016/j.compositesb.2019.107079 ↗
14. Probabilistic flexural fatigue in plain and fiber-reinforced concrete10.3390/ma10070767 ↗
15. Properties of steel fibre reinforced concrete containing larger coarse aggregate10.1016/0958-9465(95)00012-2 ↗
16. Flexural fatigue analysis of steel fibre reinforced concrete
17. B. Isojeh, M. El-Zeghayar, F.J. Vecchio Fatigue behavior of steel fiber concrete in direct tension, J. Mater. Civ. Eng. 29(9) (2017) 04017130.10.1061/(ASCE)MT.1943-5533.0001949 ↗
18. Fatigue behavior of steel fiber reinforced concrete in uniaxial and biaxial compression
19. Fatigue behavior of fiber-reinforced concrete in compression10.1016/S0958-9465(01)00019-1 ↗
20. An overview of the fatigue behaviour of plain and fibre reinforced concrete10.1016/S0958-9465(02)00139-7 ↗
21. Influence of the fiber content on the compressive low-cycle fatigue behavior of self-compacting SFRC10.1016/j.ijfatigue.2017.04.005 ↗
22. Fatigue performance in flexure of fiber reinforced concrete
23. Flexural fatigue strength of steel fibrous concrete containing mixed steel fibres10.1631/jzus.2006.A1329 ↗
24. Fiber-distribution assessment in steel fiber-reinforced UHPC using conventional imaging, X-ray CT scan, and concrete electrical conductivity10.1061/(ASCE)MT.1943-5533.0002733 ↗
25. On the orientation of fibres in structural members fabricated with self compacting fibre reinforced concrete10.1016/j.cemconcomp.2011.09.005 ↗
26. Assessment of the fibre orientation factor in SFRC slabs10.1016/j.compositesb.2014.09.001 ↗
27. Effects of fiber orientation and content on the static and fatigue behavior of SFRC by using CT-Scan technology10.1016/j.ijfatigue.2019.06.038 ↗
28. CT-Scan study of crack patterns of fiber-reinforced concrete loaded monotonically and under low-cycle fatigue10.1016/j.ijfatigue.2018.05.011 ↗
29. Investigation on the relationship between the steel fibre distribution and the post-cracking behaviour of SFRC10.1016/j.conbuildmat.2018.12.081 ↗
30. Effects of fiber shape and distance on the pullout behavior of steel fibers embedded in ultra-high-performance concrete10.1016/j.cemconcomp.2019.05.006 ↗
31. Distribution and orientation of fibers in steel fiber reinforced concrete
32. Distribution of steel fibres in rectangular sections10.1016/j.cemconcomp.2004.03.005 ↗
33. Evaluation of steel fiber distribution in cement-based mortars using active microwave thermography10.1617/s11527-016-0843-3 ↗
34. Influence of flowability, casting time and formwork geometry on fiber orientation and mechanical properties of UHPFRC10.1016/j.cemconres.2017.02.017 ↗
35. On the prediction of the orientation factor and fibre distribution of steel and macro-synthetic fibres for fibre-reinforced concrete10.1016/j.cemconcomp.2016.11.008 ↗
36. Static and fatigue properties of concrete beams reinforced with continuous bars and with fibers
37. Fatigue behavior of steel-fiber-reinforced concrete beams10.1061/(ASCE)ST.1943-541X.0001074 ↗
38. MOHURD · 2015
39. Bond stress slip response of bars embedded in hybrid fibre reinforced high performance concrete10.1016/j.conbuildmat.2013.09.032 ↗
40. A plastic-damage model for concrete10.1016/0020-7683(89)90050-4 ↗
41. Plastic-damage model for cyclic loading of concrete structures10.1061/(ASCE)0733-9399(1998)124:8(892) ↗
42. Normal-and high-strength fiber-reinforced concrete under compression10.1061/(ASCE)0899-1561(1992)4:4(415) ↗
43. Tensile behavior of steel-polypropylene hybrid fiber-reinforced concrete
44. AQSIQ, SAC, Code for design of concrete structures, GB50010-2010, China Architecture & Building Press, Beijing, 2010.
45. Parameterised finite element modelling of RC beam shear failure
46. Fatigue behavior of damaged steel beams repaired with CFRP strips10.1016/j.engstruct.2011.01.019 ↗
47. Fatigue performance and stress range modeling of SFRC beams with high-strength steel bars10.1016/j.engstruct.2020.110706 ↗
48. Fatigue resistance of steel fiber-reinforced concrete deep beams10.14359/51700792 ↗