journal article·2021-10

A structural design for semi-rigid base asphalt pavement based on modulus optimization

Songtao Lv, Jiang Yuan, Xinghai Peng, Naitian Zhang, Hongfu Liu, Xinzi Luo

Publisher page

Abstract

Abstract The early damage of the semi-rigid base asphalt pavement is related to the pavement structure modulus's unreasonable matching. In this study, three typical pavement structures were selected to analyze the pavement structures' influence on the pavement service life. A three-dimensional finite element pavement structure model was established. The independent variables are subgrade modulus, base course modulus, and subbase modulus. The deflection, the bottom tensile stress, and maximum shear stress were chosen as the evaluation indexes. The effect of the modulus on the mechanical response of the pavement structure was analyzed. The optimal modulus combination of the pavement structure was determined through multi-factor range analysis. The mechanical response and fatigue life before and after the optimization pavement structure were compared. The results showed that the field measured modulus of Structure 1 and 2 was higher than the design modulus. Moreover, while the modulus of base course and subbase course was increased, the deflection gradually reduced. The base course's bottom tensile stress and the subbase were increased, and the maximum shear stress was basically unchanged. After the modulus combination optimized pavement structure, the mechanical response was significantly reduced. The fatigue life based on the deflection and bottom tensile stress, and the laboratory normalized fatigue equation were significantly increased. By the combination of fatigue performance of pavement materials and pavement structure, it was possible to provide an effective optimization method for the design of semi-rigid base asphalt pavement in this research work.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. An innovative evaluation method for performance of in-service asphalt pavement with semi-rigid base10.1016/j.conbuildmat.2019.117376 ↗
2. D. Liu, Z. Wang, Research on the design of asphalt pavement structure in a hot and rainy area, Heilongjiang Jiaotong Keji (3) (2019) 50-51,53. doi: 10.16402/j.cnki.issn1008-3383.2019.03.028.
3. Performance and optimization of bio-oil/Buton rock asphalt composite modified asphalt10.1016/j.conbuildmat.2020.120235 ↗
4. C. Raab, M.N. Partl, Interlayer bonding of binder, base and subbase layers of asphalt pavements: Long-term performance, Constr. Build. Mater. 23(8) (2009) 2926-2931. doi: 10.1016/j.conbuildmat.2009.02.025.10.1016/j.conbuildmat.2009.02.025 ↗
5. Impact of pavement layer properties on the structural performance of inundated flexible pavements10.1016/j.trgeo.2018.06.002 ↗
6. Unified characterizing fatigue performance of rubberized asphalt mixtures subjected to different loading modes10.1016/j.jclepro.2020.123740 ↗
7. H.J. Lee, J.H. Lee, H.M. Park, Performance evaluation of high modulus asphalt mixtures for long life asphalt pavements, Construction and Building Materials 21(5) (2007) 1079-1087. doi: 10.1016/j.conbuildmat.2006.01.003.10.1016/j.conbuildmat.2006.01.003 ↗
8. N.J. Santero, J. Harvey, A. Horvath, Environmental policy for long-life pavements, Transp. Res. Part D: Transp. Environ. 16(2) (2011) 129-136. doi: 10.1016/j.trd.2010.09.005.10.1016/j.trd.2010.09.005 ↗
9. Evolution and locational variation of asphalt binder aging in long-life hot-mix asphalt pavements10.1016/j.conbuildmat.2014.05.091 ↗
10. Strength and fatigue performance for cement-treated aggregate base materials10.1080/10298436.2019.1634808 ↗
11. Estimating resilient modulus of base aggregates for mechanistic-empirical pavement design and performance evaluation10.1016/j.trgeo.2018.09.014 ↗
12. A nondestructive evaluation method for semi-rigid base cracking condition of asphalt pavement10.1016/j.conbuildmat.2017.12.157 ↗
13. G. Yang, X. Wang, Study on the rationality of application of high modulus asphalt concrete in long-life semi-rigid base asphalt pavement, Journal of Highway and Transportation Research and Development 36(5) (2019) 20-26+56.
14. Standardization to evaluate the lasting capacity of rubberized asphalt mixtures with different testing approaches10.1016/j.conbuildmat.2020.121341 ↗
15. X. Zhao, Design method of the long-life asphalt pavement structure, China Highway (1) (2019) 104-105. doi: 10.13468/j.cnki.chw.2019.01.033.
16. Y. Luo, The influence analysis of structural parameters on the mechanical behavior of asphalt pavement, Shanxi Science and Technology of Communications (3) (2016) 26-28.
17. R. Zhang, T. Ling, M. Yuan, H. Ning, Influence of asphalt semi-rigid base modules on pavement structural stress, Journal of Chongqing Jiaotong University(Natural Science) 30(4) (2011) 755-758+863.
18. F. Li, L. Sun, Analysis of the influence of base course modulus on the mechanical performance of asphalt pavement, J. Highway Transp. Res. Development 23(10) (2006) 41-43+49.
19. X. Ma, Z. Guo, Mechanical analysis of the effect of base course modulus on asphalt pavement performance, J. China Foreign Highway 28(4) (2008) 46-48. doi: 10.14048/j.issn.1671.
20. Sensitive mechanical analysis of structural parameters of semi-rigid base asphalt pavement
21. Numerical investigation of the mechanical response of semi-rigid base asphalt pavement under traffic load and nonlinear temperature gradient effect10.1016/j.conbuildmat.2019.117406 ↗
22. Reliability analysis of semi-rigid base asphalt pavement structure
23. D. Li, Analysis of the structural combination optimization of asphalt pavement, Highway Eng. 42(6) (2017) 152-157+260.
24. Stability analysis of anisotropic granular base layers in flexible pavements10.1016/j.trgeo.2018.01.001 ↗
25. The modeling prediction of haul road surface deflection10.1016/j.trgeo.2017.11.005 ↗
26. Evaluation of plate load based testing approaches in measuring stiffness parameters of pavement bases10.1016/j.trgeo.2018.06.005 ↗
27. Deep drawing simulations using the finite element method embedding a multi-level crystal plasticity constitutive law: Experimental verification and sensitivity analysis10.1016/j.cma.2019.05.035 ↗
28. Research three-dimensional finite element model of asphalt pavement structure
29. Simultaneous mesh generation and partitioning for Delaunay meshes10.1016/S0378-4754(00)00192-0 ↗
30. Finite element mesh generation and decision criteria of mesh quality
31. JTG D50-2006, Specifications for Design of Highwat Asphalt Pavement, Renmin Communication Press, Beijing, China (2006).
32. S. Wu, H. Chen, J. Zhang, Z. Zhang, Effects of interlayer bonding conditions between semi-rigid base layer and asphalt layer on mechanical responses of the asphalt pavement structure, International Journal of Pavement Research and Technology 10(3) (2017) 274-281. doi: 10.1016/j.ijprt.2017.02.003.10.1016/j.ijprt.2017.02.003 ↗
33. Wei · 2010
34. Laboratory investigation for the road performance of asphalt mixtures modified by rock asphalt/styrene butadiene rubber
35. Normalization of fatigue characteristics for asphalt mixtures under different stress states10.1016/j.conbuildmat.2018.05.109 ↗
36. Normalized characterization method for fatigue behavior of cement-treated aggregates based on the yield criterion10.1016/j.conbuildmat.2019.117099 ↗
37. Development and Reform Commission of Zhangzhou, Feasibility Study Report on Xiamen-Zhangzhou Expressway, https://www.docin.com/p-952941965-f4.html (2006).
38. Department of Transportation of Hunan Province, Statistical communiqué on the development of hunan highway and waterway transportation industry in 2018, http://jtt.hunan.gov.cn/xxgk/jttj/201904/t20190416_5316077.html (2019).
39. Fabrication of cooling asphalt pavement by novel material and its thermodynamics model10.1016/j.conbuildmat.2020.121930 ↗
40. Study on UV aging resistance of nano-TiO2/montmorillonite/styrene-butadiene rubber composite modified asphalt based on rheological and microscopic properties