SBS morphology characteristics in asphalt binder and their relation with viscoelastic properties
Source abstract
Abstract
Abstract Fluorescence microscopy technology was conducted to characterize the microscopic morphology of SBS modifier in asphalt binder, and the effect law of different SBS content, shear temperature and shear rate during the modification, on the microscopic morphology of SBS modifier is discussed. SBS area ratio, box dimension, area-weighted average axis ratio, coefficient of variation in axis ratio, average particle area and coefficient of variation in particle area were defined to characterize the SBS morphologies. Relation between SBS microscopic morphology and the viscoelastic properties of asphalt binder was also established. Results show that the area ratio of SBS particle has linear relationship with the SBS content, while higher SBS content has negative impact on the SBS distribution in asphalt binder. Increasing shear temperature can reduce the size of SBS particles from 7 to 10 μm at 130 °C to 4–5 μm at 175 °C. Higher shear rate brings stronger mechanical effect to SBS asphalt, which makes the physical dispersion of SBS more uniform, the specific surface area of fine particle size is larger, and the area ratio increases due to sufficient swelling effect. The rutting factor of SBS asphalt is greatly affected by the microstructure of SBS modifier. The modified Einstein model and modified Maron and Pierce and Quemada model can be successfully used to describe the relation between rutting factor of asphalt binder and morphologies of SBS modifier in the binder. This study provided a good technic to enhance the quality of SBS modified binder and its corresponding mixture by means of improving the SBS morphologies in asphalt binder.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. VOCs reduction in bitumen binder with optimally designed Ca(OH)2-incorporated zeolite10.1016/j.conbuildmat.2021.122485 ↗
2. Mapping of publications on asphalt pavement and bitumen materials: a bibliometric review10.1016/j.conbuildmat.2019.117370 ↗
3. Effect of aggregate morphologies and compaction methods on the skeleton structures in asphalt mixtures10.1016/j.conbuildmat.2020.120220 ↗
4. Effect of mixing time on reclaimed asphalt mixtures: an investigation by means of imaging techniques10.1016/j.conbuildmat.2015.09.009 ↗
5. Wegan V, Bredahl Nielsen C. Microstructure of polymer modified binders in bituminous mixtures. proceedings of the papers submitted for review at 2nd eurasphalt and eurobitume congress, HELD 20-22 September 2000, Barcelona, Spain BOOK 1 – SESSION 1, 2000.
6. Observation and evaluation of the degree of blending of reclaimed asphalt concretes using microscopy image analysis10.1016/j.conbuildmat.2012.07.048 ↗
7. Influence of SBS and asphalt on SBS dispersion and the performance of modified asphalt10.1016/j.conbuildmat.2014.03.018 ↗
8. Protocol for the morphology analysis of SBS polymer modified bitumen images obtained by using fluorescent microscopy10.1080/10298436.2017.1316647 ↗
9. Analysis of styrene-butadiene-styrene polymer modified bitumen using fluorescent microscopy and conventional test methods10.1016/j.jhazmat.2007.04.122 ↗
10. Morphology and image analysis of polymer modified bitumens10.1016/j.conbuildmat.2008.08.020 ↗
11. A review on hydronic asphalt pavement for energy harvesting and snow melting10.1016/j.rser.2015.04.029 ↗
12. Dispersion of SBS and its influence on the performance of SBS modified asphalt10.1520/JTE20130213 ↗
13. Effect of recycling agents on rheological and micromechanical properties of SBS-modified asphalt binders10.1155/2018/5482368 ↗
14. Influence of base asphalt and SBS modifier on the weathering aging behaviors of SBS modified asphalt10.1061/(ASCE)MT.1943-5533.0002188 ↗
15. Effect of ageing on the morphology and creep and recovery of polymer-modified bitumens10.1617/s11527-018-1263-3 ↗
16. Analytically predicting the viscosity of hard sphere suspensions from the particle size distribution10.1016/j.jnnfm.2014.09.002 ↗
17. Effect of hydration and silicone resin on Basic Oxygen Furnace slag and its asphalt mixture10.1016/j.jclepro.2015.09.041 ↗
18. Laboratory evaluation of rejuvenating agent on reclaimed SBS modified asphalt pavement10.3390/app7070743 ↗
19. Effect of C 9 petroleum resins on improvement in compatibility and properties of SBS-modified asphalt10.1080/10916466.2019.1602642 ↗
20. Effect and prediction of aromatic oil on swelling degree of direct-to-plant SBS modifier in bitumen10.1080/10916466.2019.1570255 ↗
21. A boundary integral equation technique for viso- elastic stress analysis10.1002/nag.1610100604 ↗
22. Visco-elastic modelling for asphalt pavements: software ViscoRoute
23. Characteristics of two-component epoxy modified bitumen10.1617/s11527-010-9652-2 ↗
24. Interaction of spent FCC catalyst and asphalt binder: rheological properties, emission of VOCs and immobilization of metals10.1016/j.jclepro.2020.120830 ↗
25. Extension of Einstein's viscosity equation to that for concentrated dispersions of solutes and particles10.1263/jbb.102.524 ↗
26. Relaxation time, diffusion, and viscosity analysis of model asphalt systems using molecular simulation10.1063/1.2799189 ↗
27. The viscosity of suspensions of spherical particles. (The fundamental η-c and φ relations)10.1002/recl.19420611205 ↗
28. Effects of interlayer bonding conditions between semi-rigid base layer and asphalt layer on mechanical responses of asphalt pavement structure10.1016/j.ijprt.2017.02.003 ↗
29. Impact of particle morphology on aggregate-asphalt interface behavior10.1016/j.conbuildmat.2016.11.132 ↗
30. Effect of chemical composition of aggregate on interfacial adhesion property between aggregate and asphalt10.1016/j.conbuildmat.2017.04.061 ↗