Temporal and spatial variability of corrosion of high-strength steel wires within a bridge stay cable
Source abstract
Abstract
Abstract The temporal and spatial corrosion variability of high-strength steel wires has a significant influence on the service performance deterioration behaviors of bridge stay cable. To proposed quantitative descriptions of the temporal and spatial variability, three different kinds of specimens are manufactured by Galvanized steel wires, and the accelerated corrosion experiments are conducted. For the single-wire specimens, the uniform corrosion process, the variation of surface microtopography and the time-dependent pitting corrosion model are investigated. In addition, the spatial corrosion variability of wires within a cable cross section is investigated by considering different damage conditions of sheath. It is found that the uniform corrosion process of the single-wire specimen can be divided into two stages, which correspond to the corrosion of Galvanized coating and substrate, respectively. The variability of uniform corrosion depth decreases firstly and then tends to be steady. The microtopography of corroded wire surface tends from compact spherical structure to be porous, hollow and loose. In the second corrosion stage, the corrosion products seem to be small clumps fluffy or flowery floccule, and then tend to be lamellar cross form and sand granular. The block maximum pitting factor of a single wire can be described by Gumbel distribution, and in the developed time-dependent model, both the location parameter and scale parameter decrease exponentially in the first corrosion stage and linearly in the second corrosion stage. The corrosion process difference factor of wires in adjacent layers of stay cable can be described by Normal distribution when the sheath is globally aging, and the mean value and coefficient of variation are 0.6758 and 0.2543, respectively. The spatial corrosion variability of cable wires is significantly affected by the broken shape of sheath. The difference of global corrosion degree of wires in different layers decreases with the extension of the exposure period. The sheath with rectangular broken shape and quadrate broken shape will lead to stronger spatial corrosion variability in cable wires than that with semi-annular broken shape.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical stress and fatigue analysis · Corrosion Behavior and Inhibition · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Combined use of SHMS and finite element strain data for assessing the fatigue reliability index of girder components in long-span cable-stayed bridge10.1016/j.tafmec.2010.10.008 ↗
2. Structural health monitoring methods of cables in cable-stayed bridge: A review10.1016/j.measurement.2020.108343 ↗
3. Effect of cathodic protection current density on corrosion rate of high-strength steel wires for stay cable in simulated dynamic marine atmospheric rainwater10.1016/j.istruc.2020.12.028 ↗
4. Experimental study on corrosion progress of interior bond section of anchor cables under chloride attack10.1016/j.conbuildmat.2014.08.063 ↗
5. Time-dependent effect of corrosion on the mechanical characteristics of stay cable10.1061/(ASCE)BE.1943-5592.0001229 ↗
6. Environmental factors affecting corrosion of galvanized steel wires10.1061/(ASCE)0899-1561(2004)16:1(1) ↗
7. Effects of environmental factors on stress corrosion cracking of cold-drawn high-carbon steel wires10.1016/j.corsci.2017.12.014 ↗
8. Experimental study of corrosion effects on high-strength steel wires considering strain influence10.1016/j.conbuildmat.2019.117910 ↗
9. Uniform and pitting corrosion modeling for high-strength bridge wires10.1061/(ASCE)BE.1943-5592.0000598 ↗
10. Probabilistic deterioration model of high-strength steel wires and its application to bridge cables10.1080/15732479.2014.948462 ↗
11. Behavior of wires in parallel wire stayed cable under general corrosion effects10.1016/j.jcsr.2013.02.010 ↗
12. Modeling corrosion in suspension bridge main cables. I: annual corrosion rate10.1061/(ASCE)BE.1943-5592.0001233 ↗
13. Failure analysis of high-strength steel wire under random corrosion10.1016/j.istruc.2021.04.082 ↗
14. 3-D modelling and statistical properties of surface pits of corroded wire based on image processing technique10.1016/j.corsci.2016.05.015 ↗
15. Geometric characteristics of corrosion pits on high-strength steel wires in bridge cables under applied stress10.1080/15732479.2020.1730408 ↗
16. Variability in cross-sectional areas and tensile properties of corroded prestressing wires10.1016/j.conbuildmat.2019.116830 ↗
17. Influence of corrosion pit on the tensile mechanical properties of a multi-layered wire rope strand10.1016/j.conbuildmat.2021.124387 ↗
18. Probabilistic prediction of mechanical characteristics of corroded strands10.1016/j.engstruct.2019.109882 ↗
19. Experimental study and residual performance evaluation of corroded high-tensile steel wires10.1061/(ASCE)BE.1943-5592.0001114 ↗
20. Experimental study on fatigue performance of corroded high-strength steel wires used in bridges10.1016/j.conbuildmat.2018.07.249 ↗
21. Experimental and numerical study of the fatigue properties of corroded parallel wire cables10.1061/(ASCE)BE.1943-5592.0000235 ↗
22. Experimental study on the fatigue behavior of corroded steel wire10.1016/j.jcsr.2020.106375 ↗
23. Fatigue life prediction for parallel-wire stay cables considering corrosion effects10.1016/j.ijfatigue.2018.05.020 ↗
24. Experimental study and residual fatigue life assessment of corroded high-tensile steel wires using 3D scanning technology10.1016/j.engfailanal.2021.105335 ↗
25. Damage evolution simulation and life prediction of high-strength steel wire under the coupling of corrosion and fatigue10.1016/j.corsci.2019.108368 ↗
26. Effects of macro-scale corrosion damage feature on fatigue crack initiation and fatigue behavior10.1016/j.ijfatigue.2017.05.028 ↗
27. A continuum model for damage evolution simulation of the high strength bridge wires due to corrosion fatigue10.1016/j.jcsr.2018.03.031 ↗
28. Analysis on damage evolution and corrosion fatigue performance of high-strength steel wire for bridge cable: experiments and numerical simulation10.1016/j.tafmec.2020.102571 ↗
29. Experimental analysis of a nondestructive corrosion monitoring system for main cables of suspension bridges10.1061/(ASCE)BE.1943-5592.0000399 ↗
30. Probability evaluation method of cable corrosion degree based on self-magnetic flux leakage10.1016/j.jmmm.2020.167544 ↗
31. Magnetic flux leakage technique to detect loss in metallic area in external post-tensioning systems10.1016/j.engstruct.2019.109765 ↗
32. Experimental assessment of the fatigue strength of corroded bridge wires using non-contact mapping techniques10.1016/j.corsci.2020.109047 ↗
33. Corrosive degradation evaluation of semi-parallel wire cables with high-density polyethylene sheath breaks10.1016/j.engfailanal.2020.104714 ↗
34. Fatigue durability study of high density polyethylene stay cable sheathing10.1016/j.conbuildmat.2016.02.109 ↗
35. The metallurgy of zinc-coated steel10.1016/S0079-6425(98)00006-1 ↗
36. A Small-window moving average-based fully automated baseline estimation method for raman spectra10.1366/11-06550 ↗
37. Probability distribution model of stress impact factor for corrosion pits of high-strength prestressing wires10.1016/j.engstruct.2020.111686 ↗
38. Distribution of corrosion and pitting factor of steel in corroded RC beams10.1016/j.conbuildmat.2015.07.119 ↗
39. Time-dependent reliability assessment of existing concrete bridges including non-stationary vehicle load and resistance processes10.1016/j.engstruct.2019.109426 ↗
40. Anticorrosive behavior of epoxy coating modified with hydrophobic nano-silica on phosphatized carbon steel10.1016/j.porgcoat.2020.106051 ↗
41. Partially dehydrated zinc hydroxide sulfate nanoplates reinforced coating for corrosion protection10.1016/j.cej.2019.05.024 ↗