Mechanical properties, morphology, and creep resistance of ultra-highly filled bamboo fiber/polypropylene composites: Effects of filler content and melt flow index of polypropylene
Source abstract
Abstract
Abstract Simultaneous realization of high filler fraction and excellent comprehensive properties remains a great challenge for extruded wood plastic composites (WPCs). Herein, ultra-highly filled bamboo fiber/polypropylene composites (UH-BPCs) with total filler content varying from 75 wt% to 90 wt% were fabricated via profile extrusion. Six kinds of polypropylene (PP) with melt flow indices (MFIs) ranging from 0.165 to 24 g (10 min)−1 were selected as the matrix. The tensile, flexural, impact strengths and dimensional stability of the UH-BPCs decreased with increasing filler content. However, a relatively high filler content (no more than 85 wt%) could improve the modulus and creep resistance of UH-BPCs. At 85 wt% filler content, the UH-BPCs with PP of moderate MFI exhibited the best mechanical properties with a tensile strength, tensile modulus, flexural strength, flexural modulus, and unnotched impact strength of 22.39 MPa, 6.05 GPa, 39.86 MPa, 7.19 GPa, and 4.22 kJ m−2, respectively. The UH-BPCs with low MFI PP presented better dimensional stability and creep resistance, especially at high temperatures. This work can provide an important reference to prepare ultra-highly filled WPCs with high performance via profile extrusion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Bamboo properties and applications · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. A review of the recent developments in biocomposites based on natural fibres and their application perspectives10.1016/j.compositesa.2015.06.007 ↗
2. Properties of an industrial extruded HDPE-WPC: The effect of the size distribution of wood flour particles10.1016/j.conbuildmat.2017.12.061 ↗
3. Effects of formulation variables on surface properties of wood plastic composites10.1016/j.compositesb.2011.07.011 ↗
4. Experimental study on mechanical behavior, biodegradability, and resistance to natural weathering and ultraviolet radiation of wood-plastic composites10.1016/j.compositesb.2019.107282 ↗
5. Palm leave and plastic waste wood composite for out-door structures10.1016/j.conbuildmat.2013.06.031 ↗
6. The effect of pre-softened wood chips on wood fibre aspect ratio and mechanical properties of wood–polymer composites10.1016/j.compositesa.2011.09.021 ↗
7. T.Q. Li, M.P. Wolcott, Rheology of wood plastics melt. Part 1. Capillary rheometry of HDPE filled with maple, Polym. Eng. Sci. 45(4) (2005) 549-559. https://doi.org/10.1002/pen.20308.10.1002/pen.20308 ↗
8. Mechanical properties of wood plastic composite panels made from waste fiberboard and particleboard10.1002/pc.20434 ↗
9. Fast-growing willow (Salix viminalis) as a filler in polyethylene composites10.1016/j.compositesb.2018.01.031 ↗
10. Sandwich-structured wood flour/HDPE composite panels: Reinforcement using a linear low-density polyethylene core layer10.1016/j.conbuildmat.2017.12.246 ↗
11. Mechanical properties, creep resistance, and dimensional stability of core/shell structured wood flour/polyethylene composites with highly filled core layer10.1016/j.conbuildmat.2019.07.329 ↗
12. Effects of material compositions on the mechanical properties of wood–plastic composites manufactured by injection molding10.1016/j.matdes.2009.03.012 ↗
13. Effect of molding temperature on fluidity and injection moldability of oven-dry steam-treated bamboo powder10.1016/j.jmatprotec.2015.05.015 ↗
14. Damage of the cell wall during extrusion and injection molding of wood plastic composites10.1016/j.compositesa.2010.06.007 ↗
15. Effects of fiber geometry and orientation distribution on the anisotropy of mechanical properties, creep behavior, and thermal expansion of natural fiber/HDPE composites10.1016/j.compositesb.2020.107778 ↗
16. Effects of raw materials and process parameters on the physical and mechanical properties of flat pressed WPC panels10.1016/j.compositesa.2011.12.028 ↗
17. Effects of processing method and fiber size on the structure and properties of wood–plastic composites10.1016/j.compositesa.2008.10.004 ↗
18. Effect of wood cell wall composition on the rheological properties of wood particle/high density polyethylene composites10.1016/j.compscitech.2014.01.001 ↗
19. Rheological behavior and mechanical properties of wood flour/high density polyethylene blends: Effects of esterification of wood with citric acid10.1002/pc.23212 ↗
20. Extrusion and mechanical properties of highly filled cellulose fibre–polypropylene composites10.1016/j.compositesa.2007.03.004 ↗
21. A. Aminullah, S.J. Syed Mustafa, M.R. Nor Azlan, N. Mohd. Hafizi, Z.A. Mohd. Ishak, H.D. Rozman, Effect of filler composition and incorporation of additives on the mechanical properties of polypropylene composites with high loading lignocellulosic materials, J. Reinf. Plast. Comp. 29(20) (2010) 3115-3124. https://doi.org/10.1177/0731684410367532.10.1177/0731684410367532 ↗
22. Effects of lubricant content on extrusion processing and mechanical properties of wood flour-high-density polyethylene composites10.1177/0892705710388590 ↗
23. Surface tearing and wall slip phenomena in extrusion of highly filled HDPE/wood flour composites10.1002/pen.20592 ↗
24. Viscoelastic evaluation of effects of fiber size and composition on cellulose-polypropylene composite of high filler content10.1002/pen.20963 ↗
25. Thermo-mechanical recycling of polypropylene for the facile and scalable fabrication of highly loaded wood plastic composites10.1016/j.compositesb.2021.108873 ↗
26. Effect of coupling agent concentration, fiber content, and size on mechanical properties of wood/HDPE composites10.1080/00914037.2011.617338 ↗
27. Effect of a novel coupling agent, alkyl ketene dimer, on the mechanical properties of wood–plastic composites10.1016/j.matdes.2014.02.048 ↗
28. Thermomechanical and dynamic mechanical properties of bamboo/woven kenaf mat reinforced epoxy hybrid composites10.1016/j.compositesb.2018.11.039 ↗
29. Effect of nanoclay, talcum, and calcium carbonate as filler on properties of composites manufactured from recycled polypropylene and rubberwood fiber10.1016/j.conbuildmat.2017.12.048 ↗
30. The effect of silane treated- and untreated-talc on the mechanical and physico-mechanical properties of poly(lactic acid)/newspaper fibers/talc hybrid composites10.1016/j.compositesb.2006.06.010 ↗
31. Physical and mechanical properties of wood–plastic composites hybridized with inorganic fillers10.1177/0021998311413690 ↗
32. P.W. Balasuriya, L. Ye, Y.W. Mai, J. Wu. Mechanical properties of wood flake-polyethylene composites. II. Interface modification, J. Appl. Polym. Sci. 83(12) (2002) 2505-2521. https://doi.org/10.1002/app.10189.10.1002/app.10189 ↗
33. Effect of the melt flow index of an HDPE matrix on the properties of composites with wood particles10.1016/j.polymertesting.2020.106678 ↗
34. The influences of fiber feature and polymer melt index on mechanical properties of sugarcane fiber/polymer composites10.1002/app.24929 ↗
35. Effect of polymeric matrix melt flow index in reprocessing extruded wood–plastic composites10.1177/0892705712458445 ↗
36. E. Silva Barbosa Ferreira, C.B.B. Luna, E.M. Araújo, D.D. Siqueira, R.M.R. Wellen. Polypropylene/wood powder/ethylene propylene diene monomer rubber‐maleic anhydride composites: Effect of PP melt flow index on the thermal, mechanical, thermomechanical, water absorption, and morphological parameters, Polym. Compos. 42(1) (2021) 484-497. https://doi.org/10.1002/pc.25841.10.1002/pc.25841 ↗
37. Wood polypropylene (PP) composites manufactured by mango wood waste with virgin or recycled pp mechanical, morphology, melt flow index and crystalline behaviour10.1007/s10924-016-0845-9 ↗
38. D.K.Owen, E.I.d.P.d. Nemours, S.F. Co. Estimation of the surface free energy of polymers. J. Appl. Polym. Sci. 13 (1969) 1741-1747. https://doi.org/10.1002/app.1969.070130815.10.1002/app.1969.070130815 ↗
39. The influence of surface treatment on the tensile properties of carbon fiber-reinforced epoxy composites-bonded joints10.1016/j.compositesb.2018.12.095 ↗
40. A degradation study of isotactic virgin and recycled polypropylene used in lead acid battery casings10.1016/j.polymertesting.2005.08.009 ↗
41. Microscopic Description of Entanglements in Polyethylene Networks and Melts: Strong
42. Statistical mechanics with topological constraints: I10.1088/0370-1328/91/3/301 ↗
43. Reptation of a Polymer Chain in the Presence of Fixed Obstacles10.1063/1.1675789 ↗
44. Small amplitude oscillatory shear flow superposed on parallel or perpendicular (orthogonal) steady shear of polydisperse linear polymers: The MLD model10.1016/j.jnnfm.2013.02.001 ↗
45. Rheology of wood plastics melt, part 2: Effects of lubricating systems in HDPE/maple composites10.1002/pen.20505 ↗
46. Numerical simulations of particle migration in a viscoelastic fluid subjected to Poiseuille flow10.1016/j.compfluid.2010.11.009 ↗
47. Development of particle migration in pressure-driven flow of a Brownian suspension10.1017/S0022112007006088 ↗
48. Processing bamboo for structural composites: Influence of preservative treatments on surface and interface properties10.1016/j.ijadhadh.2018.05.009 ↗
49. Relationship between internal bond properties and x-ray densitometry of wood plastic composite10.1016/j.compositesb.2020.108477 ↗
50. Optimized material composition to improve the physical and mechanical properties of extruded wood–plastic composites (WPCs)10.1016/j.conbuildmat.2011.09.013 ↗
51. Reinforcement of continuous fibers for extruded wood-flour/HDPE composites: Effects of fiber type and amount10.1016/j.conbuildmat.2019.116718 ↗
52. P.W.Balasuriya, L.Ye, Y.W.Mai. Meachanical properties of wood flake-polyethlene composites. Part Ⅰ:effects of processing methods and matrix melt flow behaviour, Compos. Part. A. Appl. Sci. Manuf. 32(5) (2001) 619-629. https://doi.org/10.1016/S1359-835X(00)00160-3.10.1016/S1359-835X(00)00160-3 ↗
53. Polyethylene-structure, crystallinity and properties10.1002/jctb.5010010812 ↗
54. Interfacial crystals morphology modification in cellulose fiber/polypropylene composite by mechanochemical method10.1016/j.compositesa.2020.105765 ↗
55. N.E. Marcovich, M.a.M. Reboredo, J. Kenny, M.I. Aranguren. Rheology of particle suspensions in viscoelastic media. Wood flour-polypropylene melt, Rheol. Acta. 43(3) (2004) 293-303. https://doi.org/10.1007/s00397-003-0349-0.10.1007/s00397-003-0349-0 ↗
56. Time and temperature dependent response of a wood–polypropylene composite10.1016/j.compositesa.2011.03.011 ↗
57. PP-based WPCs-Influence of the molar mass of matrix and coupling agent10.1002/pc.22392 ↗