Effect of different gypsum dosage on the chloride binding properties of C4AF hydrated paste
Source abstract
Abstract
Abstract To reveal the mechanism of the high chloride-binding capacity for high ferrite Portland cement, ferrite phase (C4AF) was prepared and the effects of different gypsum dosages (0%, 5%, 10%, 20%, 30%) on the chloride binding performance, phase composition, microstructure and pore structure of C4AF hydrated paste were investigated by XRD, TG-DTA, SEM-EDS and nitrogen adsorption analysis. The results show that the pure C4AF hydrated paste had a strong chloride binding ability, in which the chemical binding chloride ion ability reached 28.3 mg/g. When the gypsum dosages increased from 5% to 30%, the chemical binding chloride ion ability decreased by 7.4%, 13.4%, 52.2% and 74.5%, respectively, compared with the pure C4AF hydrated paste. With the increase of gypsum dosages, the content of C3(A,F)H6 in the C4AF hydrated paste decreased, while a large amount of monosulfate (AFm) was generated and the specific surface area of hydration products was greatly reduced. During chloride ion erosion, mainly C3(A,F)H6 reacted chemically with chloride salt to generate Friedel’s salt, and the chemical chloride binding ability showed a linear correlation with the content of C3(A,F)H6 in the C4AF hydrated paste.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Effect of styrene–butadiene rubber latex on the chloride permeability and microstructure of Portland cement mortar10.1016/j.conbuildmat.2008.11.011 ↗
2. Factors influencing chloride transport in concrete structures exposed to marine environments10.1016/j.cemconcomp.2007.09.005 ↗
3. Chloride ions transportation behavior and binding capacity of concrete exposed to different marine corrosion zones10.1016/j.conbuildmat.2018.05.120 ↗
4. Relationship between free chloride and total chloride contents in concrete10.1016/S0008-8846(03)00065-6 ↗
5. Durability of steel reinforced concrete in chloride environments: An overview10.1016/j.conbuildmat.2011.12.038 ↗
6. The AFm phase in Portland cement10.1016/j.cemconres.2006.10.010 ↗
7. Hydration products of calcium aluminoferrite10.1016/0008-8846(83)90060-1 ↗
8. Combined effect of lignosulfonate and carbonate on pure portland clinker compounds hydration. I. Tetracalcium aluminoferrite hydration10.1016/0008-8846(80)90122-2 ↗
9. Compressive behavior of fiber reinforced high-performance concrete subjected to elevated temperatures10.1016/j.cemconres.2004.02.011 ↗
10. Synthesis, Characterization and Formation Mechanism of Friedel’s Salt (FS: 3CaO center dot Al2O3 center dot CaCl2 center dot 10H(2)O) by the Reaction of Calcium Chloride with Sodium ithuninate10.1007/s11595-015-1104-y ↗
11. Study on the resistance to seawater corrosion of the cementitious systems containing ordinary Portland cement or/and calcium aluminate cement10.1016/j.conbuildmat.2017.09.175 ↗
12. Studies using 27Al MAS NMR of AFm and AFt phases and the formation of Friedel’s salt10.1016/S0008-8846(02)00901-8 ↗
13. Influence of calcium nitrate and nitrite on the constitution of AFm and AFt cement hydrates10.1680/adcr.10.00002 ↗
14. Impact of chloride on the mineralogy of hydrated Portland cement systems10.1016/j.cemconres.2010.03.002 ↗
15. Desilication of sodium aluminate solution by Friedel’s salt (FS: 3CaO·A12O3·CaCl2·10H2O)10.1016/j.hydromet.2009.08.010 ↗
16. Influence of gluconate, lignosulfonate or glucose on the C3A hydration in the presence of gypsum with or without lime10.1016/0008-8846(84)90086-3 ↗
17. The microstructure of the hydration products of tri-calcium aluminate in the presence of gypsum10.1007/BF00560628 ↗
18. A state-of-the-art review on delayed ettringite attack on concrete10.1016/S0958-9465(02)00080-X ↗
19. Mechanisms and kinetics of C4AF hydration with gypsum10.1016/0008-8846(81)90112-5 ↗
20. Phase compositions and equilibria in the CaO–Al2O3–Fe2O3–SO3 system, for assemblages containing ye’elimite and ferrite Ca2(Al, Fe)O510.1016/j.cemconres.2013.08.005 ↗
21. Evolution of iron speciation during hydration of C4AF10.1016/j.wasman.2006.01.021 ↗
22. Hydration products of calcium aluminoferrite in the presence of gypsum10.1016/0008-8846(94)90096-5 ↗
23. Comparative and semi-quantitative XRD analysis of Friedel’s salt originating from pozzolan and Portland cement10.1016/j.conbuildmat.2010.11.037 ↗
24. The binding of chloride ions by sulphate resistant portland cement10.1016/0008-8846(95)00047-G ↗
25. Effects of clinker contents of different C3A and C4AF on the performance of PSC cement10.1007/s11595-013-0724-3 ↗
26. Mechanism and kinetics of hydration of C3A and C4AF. Extracted from cement
27. In situ Raman analysis of hydrating C3A and C4AF pastes in presence and absence of sulphate10.1179/174367606X120179 ↗
28. Chloride Binding of Cement Estimated by Binding Isotherms of Hydrates10.3151/jact.3.77 ↗
29. Probing the exact form and doping preference of magnesium in ordinary Portland cement clinker phases: A study from experiments and DFT simulations10.1016/j.cemconres.2021.106420 ↗
30. Chloride binding capacity and binding isotherms of OPC pastes and mortars10.1016/0008-8846(93)90089-R ↗
31. Impact of drying on pore structures in ettringite-rich cements10.1016/j.cemconres.2016.03.003 ↗
32. Physically and chemically bound chlorides in hydrated cement pastes: a comparison study of the effects of silica fume and metakaolin10.1007/s10853-018-2953-5 ↗
33. The paste hydration of brownmillerite with and without gypsum: a time resolved synchrotron diffraction study at 30, 70, 100 and 150 °C10.1039/B313215C ↗
34. Hydration of C4AF in the presence of other phases: A synchrotron X-ray powder diffraction study10.1016/j.conbuildmat.2015.10.114 ↗
35. Hydration of C 4 AF in the presence of other phases: A synchrotron X-ray powder diffraction study10.1016/j.conbuildmat.2015.10.114 ↗
36. Influence of Gluconate, Lignosulfonate, and Glucose Admixtures on the Hydration of Tetracalcium Aluminoferrite in the Presence of Gypsum with or without Calcium Hydroxide
37. A comparison of liquid-solid and gas-solid accelerated carbonation for enhancement of recycled concrete aggregate10.1016/j.cemconcomp.2021.103988 ↗
38. Early Hydration of Tetracalcium Aluminoferrite in Gypsum and Lime-Gypsum Solutions10.1111/j.1151-2916.1987.tb05682.x ↗
39. Friedel’s salt formation in sulfoaluminate cements: A combined XRD and 27 Al MAS NMR study10.1016/j.cemconres.2014.08.004 ↗
40. The stability of bound chlorides in cement paste with sulfate attack10.1016/j.cemconres.2014.11.010 ↗
41. Deterioration of hardened cement paste under combined sulphate-chloride attack investigated by synchrotron XRD10.1016/j.solidstatesciences.2016.04.002 ↗
42. Study of chloride binding and diffusion in GGBS concrete10.1016/S0008-8846(02)00712-3 ↗
43. Chloride binding of cement-based materials subjected to external chloride environment – A review10.1016/j.conbuildmat.2008.02.004 ↗
44. Carbon-dioxide-activated bonding material with low water demand10.1680/jadcr.18.00222 ↗
45. Understanding the role of brownmilerite on corrosion resistance10.1016/j.conbuildmat.2020.119262 ↗
46. Mechanism of Friedel’s salt formation in cements rich in tri-calcium aluminate10.1016/S0008-8846(96)85009-5 ↗
47. Study on the degradation mechanism of sulphoaluminate cement sea sand concrete eroded by biological sulfuric acid10.1016/j.conbuildmat.2017.08.172 ↗