Compatibility of different fibres with red mud-based geopolymer grouts
Source abstract
Abstract
Abstract Grouting materials are subjected to high stress during underground engineering construction and are easily damaged. To overcome the shortcomings of red mud-based geopolymer grout, systematic experiments were conducted to analyse the workability, mechanical properties and failure mode of red mud-based grouts reinforced with polypropylene, glass and basalt fibres. Micro-structural analysis was conducted to reveal the mechanism of the effects of fibres on the geopolymer grouts, and the results show that the yield stress of the red mud-based grouts increased with the fibre content. The addition of polypropylene, glass and basalt fibres increased the mechanical strength of the grouts by 27.5%, 32.6% and 27.3% and increased the flexural strength by 16.07%, 30.35% and 35.36%, respectively. Moreover, all fibre-reinforced red mud-based grouts exhibited higher elastic modulus and low porosity, as revealed by the longitudinal wave velocity performance and mercury intrusion porosimetry. Micro-structural analysis of the grouts revealed an effective interfacial bonding between the fibres and the geopolymeric binder. The obtained grouts overcome the shortcomings of red mud-based geopolymer grouts and exhibit an improved utilisation rate of red mud in geotechnical engineering.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Grouting, Rheology, and Soil Mechanics · Concrete and Cement Materials Research · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. The theoretical and numerical analysis of water inrush through filling structures10.1016/j.matcom.2018.12.014 ↗
2. Typical underwater tunnels in the mainland of China and related tunneling technologies10.1016/j.eng.2017.12.007 ↗
3. Study and engineering application on the bolt-grouting reinforcement effect in underground engineering with fractured surrounding rock10.1016/j.tust.2018.11.028 ↗
4. Grouting mechanism of quick setting slurry in rock fissure with consideration of viscosity variation with space10.1016/j.tust.2017.08.016 ↗
5. Investigation and practical application of a new cementitious anti-washout grouting material10.1016/j.conbuildmat.2019.07.057 ↗
6. Geopolymers and geopolymeric new materials10.1007/BF01904446 ↗
7. The study of disorder and nanocrystallinity in C-S–H, supplementary cementitious materials and geopolymers using pair distribution function analysis10.1016/j.cemconres.2011.03.027 ↗
8. Metakaolin-based geopolymers: Relation between formulation, physicochemical properties and efflorescence formation10.1016/j.compositesb.2019.107671 ↗
9. Performance of blended metakaolin/blastfurnace slag alkali-activated mortars10.1016/j.cemconcomp.2016.04.008 ↗
10. Effects of slag substitution on physical and mechanical properties of fly ash-based alkali activated binders (AABs)10.1016/j.cemconres.2019.05.003 ↗
11. Preparation and application of alkali-activated materials based on waste glass and coal gangue: A review10.1016/j.conbuildmat.2019.06.071 ↗
12. Geopolymer with improved thermal stability by incorporating high-magnesium nickel slag10.1016/j.conbuildmat.2017.08.081 ↗
13. One-part alkali-activated materials: a review10.1016/j.cemconres.2017.10.001 ↗
14. Advances in understanding alkali-activated materials10.1016/j.cemconres.2015.04.013 ↗
15. Development of sustainable alkali-activated bricks using industrial wastes10.1016/j.conbuildmat.2019.04.152 ↗
16. Synthesis and characterization of red mud and rice husk ash-based geopolymer composites10.1016/j.cemconcomp.2012.11.010 ↗
17. Strength and durability characteristic of alkali activated GGBS stabilized red mud as geo-material10.1016/j.conbuildmat.2019.03.261 ↗
18. Preparation and characterization of a red mud-based road base material: Strength formation mechanism and leaching characteristics10.1016/j.conbuildmat.2019.06.027 ↗
19. Reaction kinetics of red mud-fly ash based geopolymers: effects of curing temperature on chemical bonding, porosity, and mechanical strength10.1016/j.cemconcomp.2018.07.008 ↗
20. Transformations of Na, Al, Si and Fe species in red mud during synthesis of one-part geopolymers10.1016/j.cemconres.2017.08.027 ↗
21. Effect of different gypsums on the workability and mechanical properties of red mud-slag based grouting materials10.1016/j.jclepro.2019.118759 ↗
22. Effects of red mud on the properties of fresh and hardened alkali-activated slag paste and mortar10.1016/j.conbuildmat.2018.02.105 ↗
23. Impact resistance of fiber-reinforced concrete – a review10.1016/j.cemconcomp.2019.103389 ↗
24. Musaad Zaheer Nazir Khan, Yifei Hao, Hong Hao, Faiz uddin Ahmed Shaikh. Mechanical properties and behaviour of high-strength plain and hybrid-fiber reinforced geopolymer composites under dynamic splitting tension. Cem. Concr. Compos., 2019; 014: 103343.10.1016/j.cemconcomp.2019.103343 ↗
25. Victor Marcos-Meson, Alexander Michel, Anders Solgaard, Gregor Fischer, Carola Edvardsen, Torben Lund Skovhus. Corrosion resistance of steel fiber reinforced concrete – a literature review. Cem. Concr. Res., 2018; 103: 1-20.10.1016/j.cemconres.2017.05.016 ↗
26. Fiber-reinforced geopolymer composites: a review10.1016/j.cemconcomp.2019.103498 ↗
27. Basalt-based fiber-reinforced materials and structural applications in civil engineering10.1016/j.compstruct.2019.02.002 ↗
28. Tensile properties of a novel fibre reinforced geopolymer composite with enhanced strain hardening characteristics10.1016/j.compstruct.2017.01.085 ↗
29. Bond characteristics of SFRP composites containing FRP core/anchors coated on geopolymer mortar10.1016/j.compstruct.2018.01.080 ↗
30. Sulfate resistance of hybrid fiber reinforced metakaolin geopolymer composites10.1016/j.compositesb.2019.107689 ↗
31. Tensile performance of eco-friendly ductile geopolymer composites (EDGC) incorporating different micro-fibers10.1016/j.cemconcomp.2019.05.004 ↗
32. The rheological test and application research of glass fiber cement slurry based on plugging mechanism of dynamic water grouting10.1016/j.conbuildmat.2018.08.081 ↗
33. Evaluation of thermal-mechanical properties of quartz sand–bentonite–carbon fiber mixtures as the borehole backfilling material in ground source heat pump10.1016/j.enbuild.2019.109407 ↗
34. Experiment on sealing efficiency of carbon fiber composite grout under flowing conditions10.1016/j.conbuildmat.2018.05.270 ↗
35. Lorenza Carabba, Mattia Santandrea, Christian Carloni, Stefania Manzi, Maria Chiara Bignozzi. Steel fiber reinforced geopolymer matrix (S-FRGM) composites applied to reinforced concrete structures for strengthening applications: a preliminary study. Composites Part B: Engineering, 2017; 128: 83-90.10.1016/j.compositesb.2017.07.007 ↗
36. H.A. Barnes. In: A handbook of elementary rheology. The University of Wales Institute of Non-Newtonian Fluid, UK, 2000, pp. 587.
37. Advances in research on flowability and rheological properties of fiber reinforced cementitious composites
38. Strain hardening polypropylene fiber reinforced composite from hydrated ladle slag and gypsum10.1016/j.compositesb.2018.09.056 ↗
39. Mechanical and microstructural characterization of fiber reinforced fly ash based geopolymer composites10.1016/j.conbuildmat.2018.02.061 ↗
40. Wang Yong, Wu Aixiang, Wang Hongjiang, Wang Yiming, Cui Liang, Jin Fei1, Zhou Bo, Shen Jiahua. Damage constitutive model of cemented tailing paste under initial temperature effect. Chin. J. Eng., 2017, 39(1): 31-38.