journal article·2022-01

Influence of elevated temperatures on the residual and quasi in-situ flexural strength of strain-hardening geopolymer composites (SHGC) reinforced with PVA and PE fibers

Ana Carolina Constâncio Trindade, Marco Liebscher, Iurie Curosu, Flávio de Andrade Silva, Viktor Mechtcherine

Publisher page

Abstract

Abstract Interest in geopolymers (GP) has been continuously increasing due to their comparable-to-concrete mechanical properties and enhanced durability characteristics. Despite their chemical stability at high temperatures, the brittle nature of geopolymers may prevent their use in applications requiring inelastic deformability, e.g., strengthening layers or elements subjected to dynamic loading. Strain-hardening geopolymer composites (SHGC) made with short high-performance fibers appear as a promising new class of materials that can yield a quasi-ductile tensile behavior under increasing loading. This article assesses distinct types of metakaolin-based SHGC with respect to the temperature effects on their mechanical performance. In particular, the efficiency of Na and K alkali solutions is compared when combined with short fibers made of polyvinyl alcohol (PVA) and ultra-high molecular weight polyethylene (PE). Flexural properties were obtained for all material variations after exposure to a temperature of 100 °C or 200 °C in cooled down state (residual) and in hot state (quasi in-situ). Additionally, thermogravimetry (TGA), mercury intrusion porosimetry (MIP), dilatometry, and environmental scannning electron microscopy (ESEM) techniques were used. At room temperature, NaGP-based composites showed higher flexural strength due to the superior properties of the matrix and crack-bridging performance of the fibers. All quasi in-situ tested specimens demonstrated higher losses in strength and ductility when compared to the residual ones. This can be traced back to higher deformability of the fiber when in hot state. As opposed to PVA, the PE fibers yielded a higher thermal sensitivity in terms of crack-bridging capacity due to their lower melting temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Understanding the relationship between geopolymer composition, microstructure and mechanical properties10.1016/j.colsurfa.2005.06.060 ↗
2. Geopolymers: nanoparticulate, nanoporous ceramics made under ambient conditions10.1017/S1431927604886719 ↗
3. Davidovits, J. Years of successes and failures in geopolymer applications. Market trends and potential breakthroughs. In Geopolymer 2002 Conference. Saint‐Quentin, France
4. Melbourne, Australia: Geopolymer Institute. 28(2002) 29.
5. Geopolymers: inorganic polymeric new materials10.1007/BF01912193 ↗
6. Microstructure and microchemistry of fully-reacted geopolymers and geopolymer matrix composites
7. Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperatures10.1016/j.cemconres.2007.08.021 ↗
8. The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers10.1016/j.colsurfa.2006.05.044 ↗
9. W.M. Kriven, J.L Bell, Effect of alkali choice on geopolymer properties. In 28th International Conference on Advanced Ceramics and Composites B: Ceramic Engineering and Science Proceedings. 25(2008) 99-104. https://doi.org/10.1002/9780470291191.ch16.10.1002/9780470291191.ch16 ↗
10. A.C.C. Trindade, F. de Andrade Silva, W.M. Kriven, Mechanical behavior of K‐geopolymers reinforced with silane‐coated basalt fibers. Journal of the American Ceramic Society. 104(2021) 437-447. https://doi.org/10.1111/jace.17446.10.1111/jace.17446 ↗
11. A.C.C. Trindade, H.A. Alcamand, P.H. Ribeiro Borges, F. de Andrade Silva, Influence of elevated temperatures on the mechanical behavior of jute-textile-reinforced geopolymers. Journal of Ceramic Science and Technology. 8(2017) 389-398. https://doi.org/10.4416/jcst2017-00045.10.1002/9781119423799.ch9 ↗
12. A proposal for the renewal of sectoral approaches building on the Cement Sustainability Initiative10.1080/14693062.2011.602552 ↗
13. Thermal evolution of metakaolin geopolymers: Part 1–Physical evolution10.1016/j.jnoncrysol.2006.09.019 ↗
14. The thermal evolution of metakaolin geopolymers: Part 2–Phase stability and structural development10.1016/j.jnoncrysol.2007.02.050 ↗
15. Thermal behaviour of inorganic geopolymers and composites derived from sodium polysialate10.1016/S0025-5408(02)01022-X ↗
16. Thermal behaviour of geopolymers prepared using class F fly ash and elevated temperature curing10.1016/j.cemconres.2006.03.022 ↗
17. Geopolymer and Portland cement concretes in simulated fire10.1680/macr.9.00110 ↗
18. Properties of fly ash and metakaolín based geopolymer panels under fire resistance tests10.3989/mc.2015.06114 ↗
19. Potassium based geopolymer for passive fire protection of concrete tunnels linings10.1016/j.tust.2014.05.003 ↗
20. Preparation of metakaolin based geopolymer coatings on metal substrates as thermal barriers10.1016/j.clay.2009.08.015 ↗
21. Thermal character of geopolymers synthesized from class F fly ash containing high concentrations of iron and α-quartz10.1111/j.1744-7402.2008.02328.x ↗
22. Thermo-mechanical and microstructural characterisation of sodium-poly (sialate-siloxo)(Na-PSS) geopolymers10.1007/s10853-006-0522-9 ↗
23. Stress–strain behaviour and abrupt loss of stiffness of geopolymer at elevated temperatures10.1016/j.cemconcomp.2010.07.010 ↗
24. Fire endurance of steel reinforced fly ash geopolymer concrete elements10.1016/j.conbuildmat.2015.04.054 ↗
25. Fire-resistant aluminosilicate composites10.1002/(SICI)1099-1018(199703)21:2<67::AID-FAM596>3.0.CO;2-N ↗
26. Micromechanics-based investigation of a sustainable ambient temperature cured one-part strain hardening geopolymer composite10.1016/j.conbuildmat.2016.11.117 ↗
27. On the mechanical performance of K- and Na-based strain-hardening geopolymer composites (SHGC) reinforced with PVA fibers
28. Tensile behavior of strain-hardening geopolymer composites (SHGC) under impact loading10.1016/j.cemconcomp.2020.103703 ↗
29. Tensile behavior of high-strength strain-hardening cement-based composites (HS-SHCC) made with high-performance polyethylene, aramid and PBO fibers10.1016/j.cemconres.2017.04.004 ↗
30. Effect of fiber properties and matrix composition on the tensile behavior of strain-hardening cement-based composites (SHCCs) subject to impact loading10.1016/j.cemconres.2015.12.008 ↗
31. Magalhães, M.S., Toledo Filho, R.D., & Fairbairn, E.D.M.R. Thermal stability of PVA fiber strain hardening cement-based composites. Construction and Building Materials. 94(2015) 437-447. https://doi.org/10.1016/j.conbuildmat.2015.07.039.10.1016/j.conbuildmat.2015.07.039 ↗
32. A thermal active restrained shrinkage ring test to study the early age concrete behaviour of massive structures10.1016/j.cemconres.2010.09.006 ↗
33. A sustainable bio-inspired cooling unit for hot arid regions: Integrated evaporative cooling system in wind tower10.1016/j.applthermaleng.2019.114201 ↗
34. Concrete blocks for thermal insulation in hot climate10.1016/j.cemconres.2004.08.018 ↗
35. Behaviour of passive fire protection K-geopolymer under successive severe fire incidents10.3390/ma8095294 ↗
36. R.G. da Silva Araujo, F.P.F. da Silva, B.L. de Sena Costa, P.H.S.S. Moreira, M.A.F. Rodrigues, & J.C. de Oliveira Freitas, Study of cement blend containing rice husk ash for oil well plug and abandonment operations. Construction and Building Materials. 254(2020) 119217. https://doi.org/10.1016/j.conbuildmat.2020.119217.10.1016/j.conbuildmat.2020.119217 ↗
37. Potential utilization of class C fly ash-based geopolymer in oil well cementing operations10.1016/j.cemconcomp.2014.06.014 ↗
38. V. Mechtcherine, F. de Andrade Silva, S. Müller, P. Jun, R.D. Toledo Filho, Coupled strain rate and temperature effects on the tensile behavior of strain-hardening cement-based composites (SHCC) with PVA fibers. Cement and Concrete Research. 42(2012) 1417-1427. https://doi.org/10.1016/j.cemconres.2012.08.011.10.1016/j.cemconres.2012.08.011 ↗
39. Influence of fiber type on the tensile behavior of high-strength strain-hardening cement-based composites (SHCC) at elevated temperatures
40. Effect of sub-elevated temperature on mechanical properties of ECC with different fly ash contents
41. Residual mechanical properties and spalling resistance of strain-hardening cementitious composite with Class C fly ash10.1016/j.conbuildmat.2018.06.009 ↗
42. Fire resistance of strain hardening cementitious composite with hybrid PVA and steel fibers10.1016/j.conbuildmat.2016.12.204 ↗
43. Amazonian metakaolin reactivity for geopolymer synthesis10.1155/2019/8950764 ↗
44. BSI. 2005. BS EN 196-1: 2005: Methods of testing cement. Determination of strength.
45. ASTM E831-19, Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis, ASTM International, West Conshohocken, PA, 2019, www.astm.org.
46. Performance of various strain-hardening cement-based composites (SHCC) subject to uniaxial impact tensile loading10.1016/j.cemconres.2017.08.008 ↗
47. Influence of fire on temperature gradient and physical-mechanical properties of macro-synthetic fiber reinforced concrete for tunnel linings10.1016/j.conbuildmat.2019.04.133 ↗
48. Rapid heating thermal shock study of ultra high temperature ceramics using an in situ testing method10.1007/s40145-017-0240-6 ↗
49. Effects of elevated temperatures on the interface properties of carbon textile-reinforced concrete10.1016/j.cemconcomp.2014.01.007 ↗
50. Influence of fiber inclination angle on bond-slip behavior of different alkali-activated composites under dynamic and quasi-static loadings10.1016/j.cemconres.2018.02.026 ↗
51. Evaluation of the tensile properties and thermal stability of ultrahigh-molecular-weight polyethylene fibers10.1002/app.21720 ↗
52. J. Zhao, M. Liebscher, A. Michel, D. Junger, A.C.C. Trindade, F. de Andrade Silva, & V. Mechtcherine, Development and testing of fast curing, mineral-impregnated carbon-fiber (MCF) reinforcements based on metakaolin-made geopolymers. Cement and Concrete Composites. 116(2021) 103898. https://doi.org/10.1016/j.cemconcomp.2020.103898.10.1016/j.cemconcomp.2020.103898 ↗
53. Effects of Si/Al ratio on the structure and properties of metakaolin based geopolymer10.1016/j.ceramint.2016.06.033 ↗