journal article·2015-09

Flexural fracture response of a novel iron carbonate matrix – Glass fiber composite and its comparison to Portland cement-based composites

Sumanta Das, Alyson Hendrix, David Stone, Narayanan Neithalath

Publisher page

Abstract

Abstract This paper explores the fracture properties of a novel and sustainable glass-fiber reinforced composite, the matrix for which is formed through the aqueous, anoxic, room-temperature carbonation of (waste) metallic iron powder along with other minor ingredients. A comparison of the properties of this binder with Ordinary Portland Cement pastes, which constitutes one of the most common and economic ceramic matrices is also provided. The iron-based binder system exhibits fracture parameters (fracture toughness, K IC S and critical crack tip opening displacement, CTOD C , determined using two parameter fracture model, TPFM) that are significantly higher when compared to those of the OPC systems in both the unreinforced and glass fiber reinforced states. The beneficial influence of the unreacted metallic iron particles of large aspect ratio, on the fracture parameters of iron-based binders are elucidated. The strain energy release rates show trends that are in line with the fracture parameters from TPFM. The elastic and inelastic components of strain energy release rate are separated in an effort to capture the fundamental toughening mechanisms in these systems. The fracture parameters determined using a non-contact, digital image correlation technique are found to relate well to those obtained from TPFM.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Environmental impact of cement production: detail of the different processes and cement plant variability evaluation10.1016/j.jclepro.2009.12.014 ↗
2. The challenge to keep global warming below 2°C10.1038/nclimate1783 ↗
3. Calculation of the corporate carbon footprint of the cement industry by the application of MC3 methodology10.1016/j.ecolind.2011.02.013 ↗
4. Cement and carbon emissions10.1617/s11527-013-0114-5 ↗
5. Life cycle carbon footprint measurement of Portland cement and ready mix concrete for a city with local scarcity of resources like Hong Kong10.1007/s11367-013-0689-7 ↗
6. Carbon dioxide emissions from the global cement industry10.1146/annurev.energy.26.1.303 ↗
7. Supplementary cementitious materials10.1016/j.cemconres.2010.12.001 ↗
8. Influence of metakaolin as supplementary cementing material on strength and durability of concretes10.1016/j.conbuildmat.2011.12.050 ↗
9. A comparison of intergrinding and blending limestone on reaction and strength evolution in cementitious materials10.1016/j.conbuildmat.2013.02.032 ↗
10. Structure and strength of NaOH activated concretes containing fly ash or GGBFS as the sole binder10.1016/j.cemconcomp.2010.03.007 ↗
11. Hydration and strength development in ternary Portland cement blends containing limestone and fly ash or metakaolin10.1016/j.cemconcomp.2013.03.028 ↗
12. Synthesis and properties of a novel structural binder utilizing the chemistry of iron carbonation10.1021/am5011145 ↗
13. The toughening of alumina with iron: effects of iron distribution on fracture toughness10.1016/S0955-2219(96)00099-4 ↗
14. Synthesis of iron-silicate analogs of zeolite beta10.1016/0144-2449(90)90023-K ↗
15. The fracture response of blended formulations containing limestone powder: evaluations using two-parameter fracture model and digital image correlation10.1016/j.cemconcomp.2014.07.018 ↗
16. Two parameter fracture model for concrete
17. Shah · 1995
18. Estimation of crack-tip-opening displacement and crack extension of glass fiber reinforced polymer mortars using digital image correlation method10.1016/j.matdes.2011.07.051 ↗
19. Digital image correlation and fracture: an advanced technique for estimating stress intensity factors of 2D and 3D cracks10.1088/0022-3727/42/21/214004 ↗
20. Quantifying crack tip displacement fields with DIC10.1016/j.engfracmech.2010.03.025 ↗
21. Pore- and micro-structural characterization of a novel structural binder based on iron carbonation10.1016/j.matchar.2014.10.025 ↗
22. Mechanical properties of high strength concrete reinforced with metallic and non-metallic fibres10.1016/j.cemconcomp.2007.03.006 ↗
23. Effects of steel fiber addition on mechanical properties of concrete and RC beams10.1016/j.conbuildmat.2005.12.006 ↗
24. Flexural strength and impact resistance study of fibre reinforced concrete in simulated aggressive environment10.1016/j.conbuildmat.2014.04.004 ↗
25. Glass ceramic of high hardness and fracture toughness developed from iron-rich wastes10.1016/S1006-7191(08)60087-3 ↗
26. Microstructural design of toughened ceramics10.1111/j.1151-2916.1991.tb06872.x ↗
27. Fracture toughness of structural ceramics10.1016/S0272-8842(98)00056-X ↗
28. Mechanical properties of glass fiber reinforced ceramic concrete10.1016/j.conbuildmat.2013.10.046 ↗
29. Fracture toughness of micro-fiber reinforced cement composites10.1016/0958-9465(95)00030-5 ↗
30. On the characterization of flexural toughness in fiber reinforced concretes10.1016/0958-9465(95)99506-O ↗
31. Fracture and flexural characterization of natural fiber-reinforced polymer concrete10.1016/j.conbuildmat.2005.02.008 ↗
32. Comparative evaluation of early age toughness parameters in fiber reinforced concrete10.1617/s11527-013-0098-1 ↗
33. Fiber synergy in Hybrid Fiber Reinforced Concrete (HyFRC) in flexure and direct shear10.1016/j.cemconcomp.2013.10.018 ↗
34. Mobasher · 2011
35. A model for predicting fracture resistance of fiber reinforced concrete10.1016/0008-8846(83)90083-2 ↗
36. An r-curve approach for fracture of quasi-brittle materials10.1016/0013-7944(90)90087-W ↗
37. Slow crack growth in cellulose fibre cements10.1007/BF02403237 ↗
38. Sakai M, Bradt RC. Graphical methods for determining the nonlinear fracture parameters of silica and graphite refractory composites. In: Fract. Mech. Ceram., Springer; 1986, p. 127–42.10.1007/978-1-4615-7023-3_10 ↗
39. Effect of ground copper slag on strength and toughness of cementitious mixes
40. A simple method for residual stress measurements in thin films by means of focused ion beam milling and digital image correlation10.1016/j.surfcoat.2012.08.095 ↗
41. Characterizing weave geometry in textile ceramic composites using digital image correlation10.1111/jace.12468 ↗
42. Accurate displacement measurement via a self-adaptive digital image correlation method based on a weighted ZNSSD criterion10.1016/j.optlaseng.2013.07.016 ↗
43. Ghorbani R, Matta F, Sutton MA. Full-field displacement measurement and crack mapping on masonry walls using digital image correlation. In: Adv. Opt. Methods Exp. Mech. vol. 3, Springer; 2014. p. 187–96.10.1007/978-3-319-00768-7_23 ↗
44. Tominaga Y, Arikawa S, Yoneyama S, Fujimoto Y, Omoto Y. Observation of thermal strain on electronic packages using digital image correlation. In: Adv. Opt. Methods Exp. Mech. vol. 3, Springer; 2014. p. 151–7.10.1007/978-3-319-00768-7_18 ↗
45. Crack propagation and strain localization in metallic particulate-reinforced cementitious mortars10.1016/j.matdes.2015.04.038 ↗
46. Fracture process zone and tensile behavior of blended binders containing limestone powder10.1016/j.cemconres.2015.03.002 ↗
47. Gdoutos · 2006 · vol. 123
48. Effect of polypropylene fiber on fracture properties of cement treated crushed rock10.1016/j.compositesb.2013.06.005 ↗