Combined effect of asphalt concrete cross-anisotropy and temperature variation on pavement stress–strain under dynamic loading
Source abstract
Abstract
Abstract This study investigates the combined effects of asphalt concrete (AC) cross-anisotropy and temperature on asphalt pavement’s stress–strain under moving wheel loads. To facilitate this study, a dynamic Finite Element Model (FEM) of an instrumented pavement section on Interstate-40 (I-40) near Albuquerque, New Mexico, is developed in ABAQUS incorporating depth-temperature variations in the AC layer under a truck wheel loading. Cross-anisotropy in the model is defined as the ratio of horizontal to vertical modulus ( n -value) of the AC. Field compacted AC cores were collected from the instrumented pavement section and tested in the laboratory to determine the n -value and viscoelastic parameters, which are incorporated in the FEM model using the User Defined Material (UMAT) interface in ABAQUS. Model is validated using field measured deflections and strains values under Falling Weight Deflectometer (FWD) test. The validated model is used for a parametric study by varying n -values of AC material under different pavement temperatures. It is observed that the horizontal tensile strain at bottom of the AC layer decreases as the n -value approaches 1.0 (isotropy). It indicates that the horizontal tensile strain decreases as the horizontal modulus of the AC increases. It is also observed that the vertical strains on top of pavement layers decreases with an increase in n -value. It indicates that increase in horizontal modulus of the AC leads to decrease in the vertical strains of pavement layers. The parametric study based on pavement temperature variation shows that horizontal tensile strain at bottom of the AC layer as well as vertical strains on top of AC, base, subbase, and subgrade are highly sensitive to temperature variation in AC layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. E. Tutumluer, U. Seyhan, Laboratory Determination of Anisotropic Aggregate Resilient Moduli Using an Innovative Testing Device. In: Transportation Research Record: Journal of the Transportation Research Board, No. 1687, 1999, pp. 13–21.10.3141/1687-02 ↗
2. Response of granular soil along constant stress increment ratio path10.1061/(ASCE)0733-9410(1990)116:3(355) ↗
3. Micromechanics-based analysis of stiffness anisotropy in asphalt mixtures10.1061/(ASCE)0899-1561(2002)14:5(374) ↗
4. Anisotropic properties of asphalt concrete: characterization and implications for pavement design and analysis10.1061/(ASCE)0899-1561(2005)17:5(535) ↗
5. Anisotropy of field-compacted asphalt concrete material10.1520/JTE100151 ↗
6. 3D-FE Simulation Study of Structural Response Analysis for Pavement-subgrade Systems Subjected to Dynamic Loads
7. Modeling of the FWD Deflection Basin to Evaluate Airport Pavements10.1061/(ASCE)GM.1943-5622.0000305 ↗
8. Modeling of Pavement Response Using Nonlinear Cross-Anisotropy Approach10.1061/(ASCE)0733-947X(2006)132:6(458) ↗
9. I.L. Al-Qadi, H. Wang, E. Tutumluer, Dynamic Analysis of Thin Asphalt Pavements Utilizing Cross-Anisotropic Stress-Dependent Properties for Granular Layer. In: Transportation Research Record: Journal of the Transportation Research Board, Paper No. 10-1553, 2010, pp. 1–17.10.3141/2154-16 ↗
10. Analysis of Flexible Pavement Response and Performance Using Isotropic and Anisotropic Material Properties10.1061/(ASCE)0733-947X(2006)132:4(342) ↗
11. Importance of nonlinear anisotropic modeling of granular base for predicting maximum viscoelastic pavement responses under moving vehicular loading10.3901/JME.2013.11.029 ↗
12. M.U. Ahmed, R.A. Tarefder, M.R. Islam, Effect of Cross-Anisotropy of Hot-Mix Asphalt Modulus on Falling Weight Deflections and Embedded Sensor Stress-Strain. In: Transportation Research Record: Journal of the Transportation Research Board, No. 2369, 2013, pp. 20–29.10.3141/2369-03 ↗
13. A. Bayat, H.A. Kasani, H.R. Soleymani, Investigation of Temperature Dependency of Asphalt Concrete Using Laboratory Dynamic Modulus and Field Deflection Testing. In: Transportation Research Board, 2011, pp. 1–14.
14. B.K. Diefenderfer, Moisture content determination and temperature profile modeling of flexible pavement structures [Ph.D Dissertation], Virginia Polytechnic Institute and State University, Virginia, USA, 2002.
15. J.M. Duncan, C.L. Monsmith, E.L Wilson. Finite Element Analyses of Pavements. In: Highway Research Record: Journal of Highway Research Board, 228, 1968, pp. 18–23.
16. Petyt · 1990
17. S.A. Romanoschi, J.B. Metcalf, Characterization of Asphalt Concrete Layer Interfaces. In: Transportation Research Record: Journal of Transportation Research Board, 1778, 2001, pp. 132–139.10.3141/1778-16 ↗
18. Ioannides, A.M., Salsilli, R.A. Interlayer and Subgrade Friction: A Brief Review of the State of the Art. Report to Federal Highway Administration, University of Illinois-Urbana Champaign, Illinois, 1988.
19. Kunt, M.M., McCullough, B.F. Improved Design and Construction Procedures for Concrete Pavements Based on Mechanistic Modeling Techniques. FHWA/TX-92-1169-5F, Texas Department of Transportation, Austin, Texas, 1992.
20. AASHTO TP 62–07. Standard Method of Test for Determining Dynamic Modulus of Hot Mix Asphalt Concrete Mixtures. AASHTO Provisional Standards, Washington, D.C., 2007.
21. Methods of interconvertion between linear viscoelastic material functions. Part I – a numerical method based on prony series10.1016/S0020-7683(98)00055-9 ↗
22. Kim, S. H. Determination of Aggregate Physical Properties and its Effect on Cross-Anisotropic Behavior of Unbound Aggregate Materials [Ph.D Dissertation], Texas A&M University, Texas, USA, 2004.
23. A. K. Appea, Validation of FWD Testing Results at the Virginia Smart Road: Theoretically and by Instrument Response [Ph.D Dissertation], Virginia Polytechnic Institute and State University, Virginia, USA, 2003.
24. Drenth, K.P. ELMOD 6: The Design and Structural Evaluation Package for Road, Airport, and Industrial Pavements. In: Proceeding of the 8th International Conference on Concrete Block Paving, 2006, San Francisco, CA, USA.
25. Investigation of Tire Contact Stress Distribution on Pavement Response10.1061/(ASCE)0733-947X(2002)128:2(136) ↗
26. I.L. Al-Qadi, H. Wang, Pavement Damage due to Different Tire and Loading Configurations on Secondary Roads. Final Report, Project No. 008IY01, NEXTRANS Center, Purdue University, Indiana, USA, 2009.
27. Roque, R., Myers, L.A., Birgisson, B. Evaluating Measured Tire Contact Stresses to Predict Pavement Response and Performance. Transportation Research Record: Journal of Transportation Research Board, No. 1716, pp. 73–81.10.3141/1716-09 ↗
28. M. S. Serdaroglu, Nonlinear Analysis of Pile Driving and Ground Vibrations in Saturated Cohesive Soils Using the Finite Element Method [Ph.D. dissertation], University of Iowa, Iowa City, 2010.