Characterization of concrete cracking due to corrosion of reinforcements in different environments
Source abstract
Abstract
Abstract This paper shows the results of a laboratory experimental study, characterizing cracking on concrete beams produced by corrosion of steel reinforcement exposed to different atmospheres. These environmental conditions were obtained by means of two electrolytic media: one alkaline, simulating the situation that occurs in an industrial environment, with beams exposed to a saturated solution of Calcium Hydroxide; and another with beams exposed to a Sodium Chloride solution, simulating de-icing or a marine environment. Test samples in reduced lab scale were tested too, in order to identify the different corrosion products generated in each case (and their influence on concrete cracking). Observation showed that the consistency of these products and the variation of the concrete consistency with regard to the environment employed, govern the cracking process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Smart Materials for Construction · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Tutti K. Corrosion of steel in concrete. Report No. 4. Swedish Cement and Concrete Research Institute (CIB). Sweden; 1982.
2. Factors controlling cracking in concrete affected by reinforcement corrosion10.1007/BF02480466 ↗
3. Ortega · 2002
4. Cover cracking as a function of bar corrosion: part I–experimental test10.1007/BF02472805 ↗
5. Law DW. Cairns JJ, Millard SG, Bungey JH. Evaluation of corrosion loss of steel reinforcing bars in concrete using linear polarization resistance measurements. In: International symposium: non-destructive testing in civil engineering; 2003 .
6. Corrosion of reinforcing steel in simulated concrete pore solutions. Effect of carbonation and chloride content10.1016/j.corsci.2004.03.013 ↗
7. Effect of superficial oxides on corrosion of steel reinforcement embedded in concrete10.5006/1.3293478 ↗
8. Electrochemical behaviour of mild steel in concrete: influence of pH and carbonate content of concrete pore solution10.1016/j.electacta.2005.04.014 ↗
9. Durability of concrete structures: DURACON, an ibero-american project. Preliminary results10.1016/j.buildenv.2005.04.005 ↗
10. Effect of carbonation, chlorides and relative humidity on the corrosion galvanized rebars embedded in concrete10.1179/000705982798274589 ↗
11. Effect of admixtures in concrete on the corrosion resistance of steel reinforced concrete10.1016/S0010-938X(99)00134-1 ↗
12. Instituto argentino de racionalización de los materiales, normalización y certificación, IRAM 1546. Portland cement concrete: compression test method. Buenos Aires; 1992.
13. American society for testing and materials, ASTM C496-71. Standard test method for splitting tensile strength of cylindrical concrete specimens. Philadelphia; 1996.
14. Instituto argentino de racionalización de materiales, normalización y certificación, IRAM 1601. Water for mortar and Portland cement concretes. Buenos Aires; 1986.
15. Comportamiento estructural de vigas de hormigón con armaduras corroídas
16. American society for testing and materials, ASTM C 876. Standard test method for half cell potential of reinforcing steel in concrete. Philadelphia; 1991.
17. Instituto argentino de racionalización de los materiales, normalización y certificación, IRAM 738. Electrochemical metal corrosion. Reinforcement and prestressed structures. Method of measurement of spontaneous potentials of steel reinforcement. Buenos Aires; 1999.
18. Cotton · 1988
19. Corrosion of reinforced steel in simulated concrete pore solutions: effect of carbonation and chloride content10.1016/j.corsci.2004.03.013 ↗
20. Chess PM, Grønvold F, Karnov AS. Cathodic protection of steel in concrete. In: Chess PM, Spon E & FN, editors. London–New York; 1998. p. 37–41.10.4324/9780203223031 ↗
21. American society for testing and materials, ASTM G1-03. Standard practice for preparing, cleaning and evaluating corrosion test specimens. Philadelphia; 2003.