Effect of GGBFS on age dependent static modulus of elasticity of concrete
Source abstract
Abstract
Abstract This paper presents the results of experimental investigations into the time-dependent static elastic modulus of concrete containing GGBFS. The static modulus of elasticity was determined at the ages of 3, 7, 28, 56, 90, 150 and 180 days for twelve concrete mixes using the cylindrical specimens of plain and GGBFS concrete. The amount of cement replacement by GGBFS was varied from 20% to 60%. The static modulus of elasticity of concrete containing GGBFS has been found to be lower than the plain concrete for all replacements of cement at all ages and for all the mixes. The experimental results of time dependent static modulus of elasticity of concrete were compared with available models. A new model for time-dependent static modulus of elasticity of concrete containing GGBFS has been proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Some engineering properties of slag concrete as influence by mix proportioning and curing
2. Assessment of elastic modulus of concrete and its influence on structural design10.1016/0008-8846(84)90034-6 ↗
3. Klink SA. Actual elastic modulus of concrete. ACI J; 1985. p. 630–3.
4. Elastic modulus of concrete from compression tests
5. Elastic modulus, Poisson’s ratio, and compressive strength relationships at early ages
6. An experimental critique of the BS 8110 method of estimating concrete elastic modulus10.1680/macr.1991.43.157.291 ↗
7. Cement and the elastic constants of concrete10.1016/0008-8846(92)90099-H ↗
8. Malhotra VM. Supplementary cementing material for concrete. Canadian Government Publishing Centre, Supply and Service Centre, Ottawa, Canada; 1987.10.4095/305059 ↗
9. ACI Committee 233 · 1999
10. Effects of mineral admixture on properties of young concrete10.1061/(ASCE)0899-1561(2003)15:5(435) ↗
11. Properties of concrete mixtures containing slag cement and fly ash for use in transportation structures10.1016/j.conbuildmat.2007.07.004 ↗
12. Mechanical properties of reactive powder concrete containing mineral admixtures under different curing regimes10.1016/j.conbuildmat.2008.08.003 ↗
13. Estimation of the modulus of elasticity of slag concrete by using composite material models10.1016/j.conbuildmat.2009.10.034 ↗
14. Influence of supplementary cementitious materials on engineering properties of high strength concrete10.1016/j.conbuildmat.2010.12.013 ↗
15. Mechanical properties of self consolidating concrete blended with high volumes of fly ash and slag10.1016/j.conbuildmat.2012.02.034 ↗
16. Rupnow TD. Evaluation of ternary cementitious combinations. Federal Highway Administration, USA, Report No.: FHWA/LA.11/486; July 2012.
17. IS: 4031 (Part 1–15). Indian standard methods of physical tests for hydraulic cement. New Delhi: Bureau of Indian Standard; 1999.
18. IS: 8112. Indian standard 43 grade ordinary Portland cement – specification. New Delhi (India): Bureau of Indian standards; 1997.
19. BS 6699. Specification for ground granulated blastfurnace slag for use with Portland cement. London: British Standard Institution; 1992.
20. IS: 383. Indian standard specification for coarse and fine aggregates from natural sources for concrete. New Delhi (India): Bureau of Indian standards; 1970.
21. IS: 456. Indian standard code for design of plain and reinforced concrete structures. New Delhi (India): Bureau of Indian Standard; 2000.
22. IS: 10262. Indian standard: recommended guidelines for concrete mix design. New Delhi (India): Bureau of Indian Standard; 1982.
23. ASTM C 469-02. Standard test method for static modulus of elasticity and Poisson’s ratio of concrete in compression. ASTM Standards, United States.
24. Justification and refinement of model B3 for concrete creep and shrinkage 1. Statistics and sensitivity10.1007/BF02473078 ↗
25. Justification and refinement of model B3 for concrete creep and shrinkage 2. Updating and theoretical basis10.1007/BF02473171 ↗
26. Short form of creep and shrinkage prediction model B3 for structures of medium sensitivity10.1007/BF02485965 ↗
27. Design provisions for drying shrinkage and creep of normal strength concrete
28. ACI Committee 209. Prediction of creep and shrinkage, and temperature effects in concrete structures. Farmington Hills (Mich.): American Concrete Institute; 1999.
29. CEB-FIP model code, design code 1994, published by Thomas Telford, London, 1990.
30. BS 8110-Part 2. Structural use of concrete-code of practice for design and construction. London: British Standard Institution; 1997.
31. Effect of GGBFS on time dependent compressive strength of concrete10.1016/j.conbuildmat.2010.01.007 ↗