journal article·2015-05

Application of AC impedance technique in study of lightweight aggregate-paste interface

Lijuan Kong, Lirong Hou, Xin Bao

Publisher page

Abstract

Abstract Find a simple and effective method to study the aggregate-paste interface is important to enrich our understanding of the role of aggregate, which occupy about 70% of concrete volume, on the microstructure of the interfacial transition zone (ITZ). In this paper, the alternating current (AC) impedance technique, together with SEM, EDX, XRD and microhardness test, were used to examine the ITZ between paste and lightweight aggregate (LWA) with different types, particle sizes and prewetting degrees. The limestone aggregate was also included for comparison. The results show that, for the same concrete sample, the diameter of high-frequency semicircle has obvious growth with the increase of the curing time, which indicates the microstructure of the concrete becomes denser. However, to study the microstructure of the interface, it is also need to adopt Song’s equivalent circuit model. By measuring the resistance of the continuous conduction paths (CCPs) in LWA, it is found that the LWA cannot be entirely seen as an insulator like rock aggregate, thus the resistance of the CCPs in lightweight concrete should be seen as a parallel circuit of the bulk paste, ITZ and opening pores in LWA. Impedance results show that the resistivity of the ITZ around rock aggregate is lower whereas that around LWA is higher, than that of the bulk paste. Moreover, the stronger the LWA absorbs the water, the higher the resistivity of the ITZ will be. From the results of SEM and microhardness it can also be seen that, the “wall effect” does not seem to occur on the surface of LWA, many cluster hydrates closely packed together in the ITZ, and its microhardness is significant higher than that of the bulk cement paste. Although the saturated LWA has weak water absorbing capacity in the early time, it can significantly improve the long term microstructure of the ITZ. All the results obtained are consistent with the impedance findings.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Smart Materials for Construction · Concrete Corrosion and Durability · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. The interfacial transition zone (ITZ) between cement paste and aggregate in concrete10.1023/B:INTS.0000042339.92990.4c ↗
2. The effect of the bond between the matrix and the aggregates on the cracking mechanism and fracture parameters of concrete10.1016/S0008-8846(02)00902-X ↗
3. Influence of silica fume on diffusivity in cement-based materials: II. Multi-scale modeling of concrete diffusivity10.1016/S0008-8846(00)00263-5 ↗
4. Interfacial transition zone in cementitious materials10.1016/S0008-8846(00)00210-6 ↗
5. Influence of aggregate size, water cement ratio and age on the microstructure of the interfacial zone10.1016/S0008-8846(03)00205-9 ↗
6. Porous structure of the ITZ around galvanized and ordinary steel reinforcement10.1016/S0008-8846(01)00597-X ↗
7. Interdependence of microstructure and strength of structural lightweight aggregate concrete10.1016/0958-9465(92)90022-N ↗
8. Microstructure of the interfacial zone between lightweight aggregate and cement paste10.1016/0008-8846(90)90103-5 ↗
9. Effect of ceramsite structure on microstructure of interfacial zone and durability of combined aggregate concrete10.1007/s11595-009-1145-1 ↗
10. Development of lightweight concrete with high resistance to water and chloride-ion penetration10.1016/j.cemconcomp.2010.08.005 ↗
11. Water absorption, permeability, and resistance to chloride-ion penetration of lightweight aggregate concrete10.1016/j.conbuildmat.2010.06.020 ↗
12. Backscattered electron imaging of cementitious microstructures: understanding and quantification10.1016/j.cemconcomp.2004.02.029 ↗
13. Spectrum analysis of the interfacial zone of lightweight aggregate concrete10.1016/j.matlet.2004.05.071 ↗
14. Penetration of cement paste into lightweight aggregate10.1016/0008-8846(92)90135-I ↗
15. Circuit models for cement based materials obtained from impedance spectroscopy10.1016/0008-8846(91)90099-4 ↗
16. The A.C. response of hardened cement paste10.1016/0008-8846(90)90051-X ↗
17. A.C. impedance spectroscopy (ІІ): microstructural characterization of hydrating cement-silica fume system10.1016/0008-8846(93)90147-2 ↗
18. Influence of the migration of chloride ions on the electrochemical impedance spectroscopy of mortar paste10.1016/j.cemconres.2004.07.040 ↗
19. Impedance spectroscopy: an efficient tool to determine the non-steady-state chloride diffusion coefficient in building materials10.1002/maco.201005775 ↗
20. Study of diffusivity of chloride ion on surface layer of concrete based on AC impedance technology
21. Corrosion rate of ordinary and high-performance concrete subjected to chloride attack by AC impedance spectroscopy10.1016/j.conbuildmat.2005.01.062 ↗
22. The importance of geometrical considerations in the measurement of steel corrosion in concrete by means of AC impedance10.1016/0010-938X(95)00095-2 ↗
23. A study of polymer-modified mortars by the AC impedance technique10.1016/S0008-8846(02)00740-8 ↗
24. The effect of a polynaphthalene sulfonate superplasticizer on the contribution of the interfacial transition zone to the electrical resistivity of mortars containing silica and limestone fine aggregate10.1016/S0008-8846(00)00222-2 ↗
25. Comparing the steel–concrete interface state and its electrochemical impedance10.1016/0008-8846(95)00214-6 ↗
26. AC impedance study of the interface between cement paste and crushed stone
27. A.C. impedance spectroscopy (І): a new equivalent circuit model for hydrated Portland cement paste10.1016/0008-8846(92)90107-7 ↗
28. Influence of silica fume on the early hydration of Portland cements using impedance spectroscopy10.1111/j.1151-2916.1992.tb04163.x ↗
29. Dielectric amplification in cement pastes10.1016/S1065-7355(96)00009-0 ↗
30. Development of an equivalent circuit model for cement pastes from microstructural considerations10.1111/j.1151-2916.1997.tb03206.x ↗
31. Equivalence circuit model for AC electrochemical impedance spectroscopy of concrete10.1016/S0008-8846(00)00400-2 ↗
32. A.C. impedance phenomena in hydrating cement systems: detectability of the high frequency arc10.1016/0008-8846(94)90088-4 ↗
33. Relating rapid chloride transport parameters of concretes to microstructural features extracted from electrical impedance10.1016/j.cemconres.2010.02.016 ↗
34. The study of permeation of concrete by impedance spectroscopy