Flexural durability of FRP bars embedded in fiber-reinforced-concrete
Source abstract
Abstract
Abstract This paper presents the results of the long-term flexural behaviors of a hybrid system consisted of continuous fiber-reinforced-polymer (FRP) rebar and fiber-reinforced-concrete (FRC). Flexural durability for the FRP/plain concrete system that served as a reference is also reported. Test results indicated that the ultimate flexural strength and ductility experienced minor reduction when exposed to combined environmental conditioning, including freeze–thaw cycles, high temperature (60 °C), and de-icing salt solution. The degradation of concrete may be the main reason for the flexural strength degradation. The addition of fibers with a volume fraction of 0.5% improved the flexural behavior by increasing the ductility level by more than 30%, when compared to the companion beam, for both unweathered and weathered beams. After being subjected to the environmental conditioning, ductility indices for all the tested beams were still above the minimum requirement of 4.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. ACI 544.1R-96. State-of-the-art report on fiber reinforced concrete. ACI 544. Farmington Hills: American Concrete Institute; 1996 [reapproved 2009].
2. Environmental durability of glass-fiber composites10.1016/0927-796X(94)90002-7 ↗
3. Durability of FRP bars embedded in fiber-reinforced-concrete10.1061/(ASCE)CC.1943-5614.0000270 ↗
4. Creep and durability of sand-coated glass FRP bars in concrete elements under freeze/thaw cycling and sustained loads10.1016/j.cemconcomp.2006.07.014 ↗
5. Environmental effects on the mechanical properties of E-glass FRP rebars
6. Durability of fiberglass pretensioned beams
7. Durability of carbon fiber reinforced polymer (CFRP) pretensioned elements under tidal/thermal cycles
8. ACI 201.2R-08. Guide to durable concrete. ACI 201. Farmington Hills: American Concrete Institute; 2008.
9. Balazs, G, Borosnyoi, A. Long-term behavior of FRP. Composites in construction: a reality. In: Cosenza E, Manfredi G, Nanni, A, editors. Proceedings of the international workshop, July 20–21 2001, Capri, Italy.
10. Durability issues of FRP rebars in reinforced concrete members10.1016/j.cemconcomp.2006.07.004 ↗
11. Temperature as an accelerating factor for long-term durability testing of FRPs: should there be any limitations?10.1061/(ASCE)CC.1943-5614.0000102 ↗
12. ASTM C 1543-02. Standard test method for determining the penetration of chloride ion into concrete by ponding. In: Annual book of standards, West Conshohocken, (Pennsylvania): American Society for Testing and Materials; 2002.
13. Durability of FRP rods for concrete structures10.1016/j.conbuildmat.2004.04.012 ↗
14. Uomoto T, Nishimura T. Deterioration of aramid, glass, and carbon fibers due to alkali, acid, and water in different temperatures. In: Fourth int symp on fiber reinforced polymer for reinforced concrete structures, SP-188, Farmington Hills: American Concrete Institute; 1999. p. 515–22.
15. Short-term durability test for GFRP rods under various environmental conditions10.1016/j.compstruct.2007.03.005 ↗
16. Sekijima K, Otsuka Y, Konno T. Durability of fiber reinforced polymer reinforcement embedded in concrete. In: Fourth int symp on fiber reinforced polymer for reinforced concrete structures, SP-188, Farmington Hills: American Concrete Institute; 1999. p. 501–13.
17. Field study of glass-fiber-reinforced polymer durability in concrete10.1139/l06-138 ↗
18. ACI 440.1R-06. Guide for the design and construction of concrete reinforced with FRP bars. ACI committee 440. Farmington Hills: American Concrete Institute; 2006.
19. Belarbi A, Wang H. Bond splitting behavior of FRP reinforcing bars embedded in fiber reinforced concrete. In: Proc for the 84th transportation research board annual meeting, Washington, DC; 2005.
20. Giernacky RG, Bakis CE, Mostoller JD, Boothby TE, Mukherjee A. Evaluation of concrete beams reinforced with internal GFRP bars: a long-term durability study. In: Benmokrane B, El-Salakawy E, editors. Second int conf on durability of fiber reinforced polymer (FRP) composites for construction, Canada; 2002. p. 39–50.
21. Ductility characteristics of fiber-reinforced-concrete beams reinforced with FRP rebars10.1016/j.conbuildmat.2010.11.040 ↗
22. Jaeger GL, Tadros G, Mufti AA. The concept of the overall performance factor in rectangular-section reinforced concrete beams. In: Proc of third int symp on non-metallic (FRP) reinforcement for concrete structures, vol. 2. Sapporo, Japan; 1997. p. 551–8.
23. Effects of FRP reinforcement ratio and concrete strength on flexural behavior of concrete beams10.1061/(ASCE)1090-0268(1998)2:1(7) ↗
24. CAN/CSA-S6-06. Canadian highway bridge design code. Ontario, Canada: Canadian Standard Association; 2006.