journal article·2015-11

Risk analysis of biodeterioration of wooden beams embedded in internally insulated masonry walls

M. Guizzardi, J. Carmeliet, D. Derome

Publisher page

Abstract

Abstract Energy retrofit of the envelope of existing historical buildings, due to their historical and cultural value, often includes the addition of an interior insulation layer. The new wall configuration changes the hygrothermal performance of the structure leading to higher moisture contents that increase the risk of damage, especially in wooden components. The hygrothermal performance of different retrofitted masonry assemblies is studied through HAM (Heat Air and Moisture) numerical simulations, for different external renders. Simulation results are post-processed using a damage model for wooden materials to evaluate the risk of biological deterioration as a consequence of the addition of an interior insulation layer. The external render, and in particular the combination of its liquid and vapor transport properties, strongly influences the hygrothermal behavior of the wall and, thus, the risk of moisture related damage to embedded wooden structures as a consequence of addition of interior insulation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hygrothermal properties of building materials · Building materials and conservation · Conservation Techniques and Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. European Norm EN 15026, Hygrothermal Performance of Building Components and Building Elements. Assessment of Moisture Transfer by Numerical Simulation, 2007.
2. Forest Products Laboratory, Wood handbook – wood as an engineering material, general technical report FPL-GTR-190, U.S. Department of Agriculture, Forest Service, Forest Product Laboratory, Madison, WI, 2010, p. 508.
3. M. Guizzardi, Hygrothermal performance assessment of novel interior insulation solutions (Ph.D. thesis), Chair of Building Physics, ETH Zürich, 2014.
4. Inside thermal insulation for historical facades
5. A mathematical model of mold growth on wooden material10.1007/s002260050131 ↗
6. D. Kehl, U. Ruisinger, R. Plagge, J. Grunewald, Wooden beam ends in masonry with interior insulation – a literature review and simulation on causes and assessment, in: 2nd Central European Symposium of Building Physics, Vienna, September 9–11, 2013.
7. Künzel · 1995
8. M. Nofal, M.K. Kumaran, On implementing experimental biological damage-functions models in durability assessment systems, in: Proc. of Japan-Canada Housing R&D Experts Working Group Meeting, Okinawa, Japan, 2000.
9. U. Ruisinger, Long-term measurements and simulations of five internal insulation systems and their impact on wooden beam heads, in: 2nd Central European Symposium of Building Physics, Vienna, September 9–11, 2013.
10. G.A. Scheffler, Moisture Problems at wooden beam ends after building renovation, in: LavEByg konference om strategi for lavenergirenovering, 22 April 2009, Hørsholm, Denmark, 2009.
11. G. Scheffler, J. Grunewald, P. Häupl, Beurteilung des hygrothermischen Verhaltens kapillaraktiver Innendämmung auf Calciumsilikatbasis durch numerische Simulation, Tagungsband 11, Bauklimatisches Symposium, S. 671–681, TU Dresden, 2002.
12. J. Straube, K. Ueno, C.J. Schumacher, Measure Guideline: internal insulation of masonry walls, Building America, Building Technologies Program, Office of Energy Efficiency and Renewable Energy, U.S. Department of Energy, July 2012, available electronically at: .
13. Trechsel · 1994
14. Modeling the time factor in the development of brown-rot-decay in pine and spruce sap wood – the effect of critical humidity and temperature conditions10.1515/hfsg.1997.51.2.99 ↗
15. H. Viitanen, A. Ritschkoff, Brown rot decay in wooden constructions: effect of temperature, humidity and moisture, report no. 222, Department of Forest Products, The Swedish University of Agricultural Sciences, Uppsala, 1991, p. 57.
16. H. Viitanen, A. Hanhijärvi, A. Hukka, K. Koskela, Modelling mould growth and decay damages, Healthy Buildings, Espoo, vol. 3, 2000, pp. 341–344.
17. Towards modeling of decay risk of wooden materials10.1007/s00107-010-0450-x ↗
18. W. Zillig, Moisture transport in wood using a multiscale approach (Ph.D. thesis), Katholieke Universiteit Leuven, Kasteelpark Arenberg 40, B-3001 Leuven, May 2009.