The feasibility of DEM to analyze the temperature field of asphalt mixture
Source abstract
Abstract
Abstract To discuss the feasibility of the discrete element method (DEM) to analyze the temperature field of asphalt mixture materials, the digital specimen of rutting plate was reconstructed based on the mix design of asphalt mixture. Also, considering the contact thermal resistance, a discrete element thermal analysis model was established based on the discrete element heat conduction equation and its discretization. The temperature field distribution in digital specimen was discussed using the DEM model, and which was compared with the experimental results on the actual rutting plate. The results indicated that the discontinuity of mesoscopic structures in asphalt mixture was fully considered in digital specimen based on the digital image processing. The internal structures of asphalt mixture specimen were reappeared, and the transient heat conduction discrete element model was established after the heat flux was applied on the specimen surface. Further, thermal responses of the upper part were faster than that of the lower part in discrete element model during continuous heating. The bulk temperature in digital specimen continued to rise after the heating was over. Similarly, the measured temperatures of upper part were higher than that that of lower part in rutting plate under both continuous and intermittent heating schemes. However, the surface temperature was lower under the intermittent heating method, reducing the asphalt aging and improving the bulk temperature and its uniformity of the specimen. It is concluded that numerical simulation results using DEM are basically consistent to experimental results. The DEM may become a new promising approach to study the temperature field distribution and other properties of asphalt mixture materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Rock Mechanics and Modeling · Landslides and related hazards
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Mesostructural damage simulation of asphalt mixture using microscopic interface contact models10.1016/j.conbuildmat.2013.11.109 ↗
2. Experimental study and discrete element method modeling of temperature distributions in rapeseed stored in a model bin10.1016/j.jspr.2014.03.009 ↗
3. Advances in micromechanical constitutive theories and modeling in asphalt mixture: a review10.1016/j.sbspro.2013.08.148 ↗
4. Discrete Element Method for the thermal field: proof of concept and determination of the material parameters10.1016/j.commatsci.2011.04.028 ↗
5. A DEM study on the effective thermal conductivity of granular assemblies10.1016/j.powtec.2010.09.008 ↗
6. Thermal DEM–CFD modeling and simulation of heat transfer through packed bed10.1016/j.powtec.2013.04.013 ↗
7. DEM simulation and analysis of particle mixing and heat conduction in a rotating drum10.1016/j.ces.2013.04.005 ↗
8. A homogenization technique for heat transfer in periodic granular materials10.1016/j.apt.2011.01.002 ↗
9. Viscoelastic model for discrete element simulation of asphalt mixtures
10. Three-dimensional simulation using fixed coarse-grid thermal-fluid scheme and conduction heat transfer scheme in distinct element method10.1016/j.powtec.2006.04.003 ↗
11. Prediction of crack-tip toughness of alumina for given residual stresses with parallel-bonded-particle model10.1016/j.commatsci.2010.12.008 ↗
12. A combined finite-discrete element method for calculating the effective thermal conductivity of bio-aggregates based materials10.1016/j.ijheatmasstransfer.2013.01.002 ↗
13. A discrete element method study on the evolution of thermomechanics of a pebble bed experiencing pebble failure10.1016/j.fusengdes.2014.04.066 ↗
14. Discrete element modelling of influences of grain shape and angularity on performance of granular mixes for asphalts10.1016/j.sbspro.2012.09.891 ↗
15. Micromechanical characteristics of aggregate particles in asphalt mixtures10.1016/j.conbuildmat.2015.05.076 ↗
16. Study of normal and shear material properties for viscoelastic model of asphalt mixture by discrete element method10.1016/j.conbuildmat.2015.08.116 ↗
17. Three-dimensional discrete element modeling of asphalt concrete: Size effects of elements10.1016/j.conbuildmat.2012.08.007 ↗
18. Review on advances in modeling and simulation of stone-based paving materials10.1016/j.conbuildmat.2013.02.043 ↗
19. Temperature-dependent viscoelastic model for asphalt concrete using discrete rheological representation10.1016/j.conbuildmat.2015.05.106 ↗
20. PFC 2D simulation of thermally induced cracks in concrete specimens
21. Shen · 2004
22. Li · 2011
23. Discrete fracture modeling of asphalt concrete10.1016/j.ijsolstr.2009.02.006 ↗
24. Three-dimensional discrete element models for asphalt mixtures
25. Discrete Element analysis of the influences of aggregate properties and internal structure on fracture in asphalt mixtures10.1061/(ASCE)MT.1943-5533.0000005 ↗