journal article·2016-06

Functionalization of reclaimed polyethylene with maleic anhydride and its application in improving the high temperature stability of asphalt mixtures

Dechong Ma, Duijia Zhao, Jingzhe Zhao, Sujun Du, Jinyu Pang, Wei Wang, Changxin Fan

Publisher page

Abstract

Abstract A process to improve the properties of reclaimed polyethylene (RPE) polymer modified asphalt mixture by grafting of maleic anhydride (MAH) onto RPE (RPE-g-MAH) in the presence of dicumyl peroxide (DCP) as initiator was proposed. Fourier transform infrared spectra (FTIR) was employed to verify the grafting of MAH onto RPE. Modified asphalt mixture under different conditions were investigated on the RPE-g-MAH samples. To assess the effects of the RPE-g-MAH on the high-temperature stability of modified asphalt mixture, we discussed dynamic stability (DS) and rutting depth (RD) of modified asphalt mixture by studying the influences of various experimental parameters such as MAH content, DCP content, mixing temperature, wet mixing times and gradation type of mixture. Experimental results indicated that the RPE-g-MAH is feasible to improve high-temperature stability performance and low-temperature performance of asphalt mixture, and it could dramatically improve resistance to rutting of the asphalt mixture. Possible mechanism was proposed for RPE-g-MAH modification of asphalt mixture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. The effect of aggregate gradation on the creep response of asphalt mixtures and pavement rutting estimates
2. Rutting prediction of asphalt mixtures modified by polypropylene fibers via repeated creep testing by utilising genetic programming10.1590/S1516-14392013005000012 ↗
3. Study on the method to calculate rutting of asphalt pavement based on the dynamic load coupled between the road and vehicle
4. Rutting evaluation of dense graded hot mix asphalt mixture
5. Application and performance of polyethylene modifying additive in asphalt
6. Experimental study of fibers in stabilizing and reinforcing asphalt binder10.1016/j.fuel.2009.08.020 ↗
7. Utilization of waste fibers in stone matrix AC mixtures10.1016/j.resconrec.2004.04.005 ↗
8. Influence of temperature and pressure on the dynamic properties of rubber-modified asphalt concrete10.1061/(ASCE)0899-1561(2006)18:1(125) ↗
9. Recycling of waste tire rubber in asphalt and Portland cement concrete: an overview10.1016/j.conbuildmat.2013.11.027 ↗
10. Laboratory performance characteristics of sulfur-modified warm-mix asphalt10.1061/(ASCE)MT.1943-5533.0000303 ↗
11. Pavement properties of asphalt modified with packaging-waste polyethylene10.1002/vnl.21328 ↗
12. Performance of polymer-modified asphalt-aggregate mixtures in Alaska10.1061/(ASCE)0887-381X(2002)16:4(170) ↗
13. Polymer modification of bitumen: advances and challenges10.1016/j.eurpolymj.2014.02.005 ↗
14. Use of waste high density polyethylene as bitumen modifier in asphalt concrete mix10.1016/S0167-577X(03)00458-0 ↗
15. Influence factors and anti-rutting agent of high-temperature stability of asphalt mixture10.1061/41123(383)123 ↗
16. Analysis of high temperature ability influence factors of anti-rutting agent modified asphalt mixture
17. The application of anti-rutting agent on improving the high-temperature stability of asphalt pavement
18. Engineering properties of polymer modified asphalt mixtures10.3141/1638-02 ↗
19. Investigation of rutting performance of asphalt mixtures containing polymer modifiers10.1016/j.conbuildmat.2005.08.014 ↗
20. Low temperature binder-aggregate adhesion and mechanistic characteristics of polymer modified asphalt mixtures10.1061/(ASCE)0899-1561(2007)19:5(411) ↗
21. Effect of low-density polyethylene on fracture toughness of asphalt concrete mixtures
22. Study on solution grafting of maleic anhydride onto LLDPE
23. Solution grafting of maleic anhydride on low-density polyethylene: effect on crystallization behavior10.1080/00222348.2013.764217 ↗
24. Modification of polyolefin by chemical grafting
25. Preparation of functionalised low-density polyethylene by reactive extrusion and its blend with polyamide 610.1016/S0032-3861(99)00260-8 ↗
26. Melt grafting of maleic anhydride onto low-density polyethylene/polypropylene blends10.1016/S0142-9418(02)00079-X ↗
27. Functionalization of high density polyethylene with maleic anhydride in the melt state through ultrasonic initiation10.1002/pen.10064 ↗
28. Solid-phase grafting of maleic anhydride onto polyethylene
29. Ultraviolet preirradiation of high-density polyethylene for the grafting of maleic anhydride during reactive extrusion10.1002/app.24730 ↗
30. Storage stability and compatibility of asphalt binder modified by SBS graft copolymer10.1016/j.conbuildmat.2006.03.008 ↗
31. Study of surface and adhesive properties of polypropylene grafted by maleic anhydride10.1002/pen.20796 ↗
32. Thermal and rheological properties of maleated polypropylene modified asphalt10.1002/pen.20386 ↗
33. Preparation and properties of bitumen modified with the maleic anhydride grafted styrene–butadiene–styrene triblock copolymer10.1002/pen.21934 ↗
34. Microstructure of maleic anhydride grafted polyethylene by high-resolution solution-state NMR and FTIR spectroscopy10.1021/ma020527r ↗
35. Depressation mechanism of pour point for high wax crude oil and influencing factors of depressation
36. Functionalization of isotactic polypropylene with maleic anhydride by reactive extrusion: mechanism of melt grafting10.1016/S0032-3861(01)00069-6 ↗
37. Chemical modification of waste oil fly ash for improved mechanical and thermal properties of low density polyethylene composites10.1007/s10965-011-9641-3 ↗
38. Grafting of maleic anhydride on polyethylene. III. influence of polyethylene concentration on the course of the reaction in a homogeneous medium10.1002/pol.1969.150070708 ↗
39. Developments in the synthesis of maleated polyolefins by reactive extrusion10.1002/masy.19981290110 ↗
40. Grafting of polyethylenes by reactive extrusion. I. Influence on the molecular structure10.1002/(SICI)1097-4628(19981003)70:1<161::AID-APP16>3.0.CO;2-A ↗
41. Asphalt/polyethylene blends: rheological properties, microstructure and viscosity modeling10.1016/j.conbuildmat.2013.03.064 ↗
42. Rheology and microstructure of functionalized polymer-modified asphalt10.1002/app.28953 ↗
43. New class of reactive polymer modifiers for asphalt: mitigation of moisture damage10.3141/1728-08 ↗
44. Rheology of asphalts modified with glycidylmethacrylate functionalized polymers10.1016/j.jcis.2004.08.043 ↗
45. Crumb tire rubber and polyethylene mutually stabilized in asphalt by screw extrusion10.1002/app.41189 ↗
46. Fracture mechanism in bitumen, modified bitumen and asphalt mixes10.1016/j.conbuildmat.2011.08.090 ↗