journal article·2016-07

Influence of the artificial lightweight aggregate on fresh properties and compressive strength of the self-compacting mortars

Erhan Güneyisi, Mehmet Gesoglu, Hussein Ghanim, Süleyman İpek, Ihsan Taha

Publisher page

Abstract

Abstract The current study experimentally investigated the effect of the artificial lightweight aggregate and the water-to-binder ratio on the initial and final setting times of self-compacting mortars. The artificial lightweight aggregates used in this study were manufactured through cold bonding pelletization of 90% of class-F fly ash and 10% of Portland cement in a tilted pan with an ambient temperature and moisture content. The self-compacting mortars were designed at four binder contents of 540 kg/m 3 , 520 kg/m 3 , 500 kg/m 3 , and 480 kg/m 3 at four different water-to-binder ratios of 0.33, 0.37, 0.40, and 0.44, respectively. In each water-to-binder ratio, the natural aggregate was substituted with the artificial lightweight aggregate at the replacement levels of 0%, 20%, 40%, and 60%. Totally 16 self-compacting mortar mixtures were designed and produced. Slump flow diameter, V-funnel flow time and initial and final setting times were experimentally investigated as fresh properties while the compressive strength of the mortar mixtures were measured at 5 different ages of 3-day, 7-day, 28-day, 56-day, and 90-day. Test results showed that both initial and final setting times of the self-compacting mortars were significantly affected by the water-to-binder ratio. Addition to setting times, the slump flow diameter and V-funnel flow time was influenced by both the water-to-binder ratio and the artificial lightweight aggregate content. Moreover, the compressive strength results indicated that increasing the artificial lightweight aggregate content systematically decreased the compressive strength of the mortar mixtures at aforementioned testing ages whereas decreasing the water-to-binder ratio increased the compressive strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Self-compacting concrete (Invited Paper)10.3151/jact.1.5 ↗
2. Mechanical and durability properties of self-compacting concrete with recycled concrete aggregates
3. Gesoğlu · 2004
4. Properties of self-compacting concrete prepared with coarse and fine recycled concrete aggregates10.1016/j.cemconcomp.2009.06.005 ↗
5. Shrinkage cracking of lightweight concrete made with cold-bonded fly ash aggregates10.1016/j.cemconres.2003.11.024 ↗
6. Turkish Statistical Institute, Press Release 8 (2010). (January, 2016).
7. Fly ash lightweight aggregates in high performance concrete10.1016/j.conbuildmat.2007.09.001 ↗
8. Utilization of fly ash engineering pellet aggregates10.1007/s00254-006-0248-7 ↗
9. Utilization of fly ash as palletization process; theory, application, areas and research results10.1016/S0921-3449(00)00042-2 ↗
10. Döven · 1998
11. Effects of fly ash properties on characteristics of cold-bonded fly ash lightweight aggregates10.1016/j.conbuildmat.2006.05.038 ↗
12. The effects of aggregate properties on lightweight concrete10.1016/j.buildenv.2005.06.031 ↗
13. Properties of autoclaved lightweight aggregate concrete10.1016/j.buildenv.2006.11.024 ↗
14. Influence of binders on properties of sintered fly ash aggregate10.1016/j.cemconcomp.2005.06.005 ↗
15. Influence of fineness of fly ash on the aggregate pelletization process10.1016/j.cemconcomp.2007.01.002 ↗
16. Influence of fly ash on strength and sorption characteristics of cold-bonded fly ash aggregate concrete10.1016/j.conbuildmat.2008.09.018 ↗
17. EFNARC · 2005
18. Properties of mortar for self-compacting concrete
19. C. Videla, P.M. Martinez, Fly ash lightweight aggregates produced by cold bonding for sustainable concrete construction, in: Proceedings of the International Conference on Challenges of Concrete-Sustainable Concrete Construction, Dundee, Scotland, 363–72.10.1680/scc.31777.0037 ↗
20. Strength and permeability properties of self-compacting concrete with cold bonded fly ash lightweight aggregate10.1016/j.conbuildmat.2014.10.032 ↗
21. Properties of lightweight aggregates produced with cold-bonding pelletization of fly ash and ground granulated blast furnace slag10.1617/s11527-012-9855-9 ↗
22. Characteristics of self-consolidating concrete using two types of lightweight coarse aggregates10.1016/j.conbuildmat.2009.08.004 ↗
23. An experimental study on the workability of self-compacting lightweight concrete10.1016/j.conbuildmat.2008.08.023 ↗
24. An experimental research on the fluidity and mechanical properties of high-strength lightweight self-compacting concrete10.1016/j.cemconres.2004.11.003 ↗
25. An investigation on the fresh properties of self-compacted lightweight concrete containing expanded polystyrene10.1016/j.conbuildmat.2011.04.018 ↗
26. Properties of self-compacting mortars with binary and ternary cementitious blends of fly ash and metakaolin10.1617/s11527-007-9345-7 ↗
27. The use of seashells as a fine aggregate (by sand substitution) in self-compacting mortar (SCM)10.1016/j.conbuildmat.2015.01.009 ↗
28. Initial and final setting time of concrete in hot weather10.1007/BF02480528 ↗
29. Durability aspect of concretes composed of cold bonded and sintered fly ash lightweight aggregates
30. Influence of fine aggregate characteristics on the rheological properties of mortars10.1016/j.cemconcomp.2007.08.008 ↗
31. Use of calculation methods for determining compositions of refractory concretes
32. Westerholm · 2006 · vol. 198
33. Utilization of cold bonded fly ash lightweight fine aggregates as a partial substitution of natural fine aggregate in self-compacting mortars10.1016/j.conbuildmat.2014.10.021 ↗
34. TS EN 197-1 · 2002
35. ASTM C618 · 2007
36. ASTM C403 · 2008
37. ASTM C109 · 2007
38. Influence of aggregate pre-wetting and fly ash on mechanical properties of lightweight concrete10.1016/j.wasman.2003.06.003 ↗
39. Effects of internal curing methods on restrained shrinkage and permeability
40. Akçay · 2007
41. Effect of porous lightweight aggregate on strength of concrete10.1016/j.matlet.2003.07.036 ↗